Aldes EasyVEC® C4 ULTRA 400: Fire-Rated Centralized Extraction Box
The EasyVEC® C4 ULTRA 400 is a highly efficient and user-friendly centralized extraction box designed for collective residential buildings. It ensures optimal air quality and building preservation while offering significant energy savings.
Product Highlights
- Wide range of airflow from 400 to 4,000 m³/h.
- Up to 15% reduction in heating consumption compared to standard boxes.
- 100% recyclable.
- Features Aldes patented Micro-watt+ and Auto-Adaptative Technology™ for precise airflow adjustment based on installation needs, leading to substantial heating cost savings.
- Remote monitoring capabilities with AldesConnect™™ Pro.
Key Features and Functionality
The EasyVEC® C4 ULTRA 400 is designed for collective residential ventilation, contributing to sufficient air quality and building preservation. When combined with the T.Flow® Hygro+ / Nano domestic hot water production solution, it utilizes naturally present heat from extracted air to warm water.
The integrated Micro-watt+ regulation system automatically creates a custom regulation profile (Auto-Adaptative Technology) to adapt the pressure delivered by the box to the actual installation requirements. This ensures ventilation is provided only when needed, maximizing energy efficiency.
With AldesConnect™™ Pro, users can monitor the ventilation unit remotely, enabling faster response times for troubleshooting and maintenance.
Applications
Suitable for collective residential buildings, new constructions, and renovations.
Installation and Implementation
- Installation on an anti-vibration base as per DTU 68.3 recommendations.
- Can be installed indoors or outdoors.
- Ensure sufficient space in front of the box for easy access to internal components for maintenance.
- Preferably install away from wind to minimize pressure loss during air discharge, especially for rooftop installations.
- For optimal acoustic and aerodynamic performance, it is recommended to:
- Install silencers at the box connection points.
- Use the ALDES VIRTUO-FIX jointed accessory range.
- Utilize MS PRO flexible airtight sleeves to decouple network vibrations.
Technical Specifications
- Model: 11034973 EasyVEC® C4 ULTRA 400
- Type: Centralized single-flow extraction box for VMC systems.
- Regulation: Micro-Watt+ and Aldes Auto-Adaptative Technology™ (rising curve) for pressure/flow regulation. Offers three additional modes: Micro-watt (constant pressure), external 0-10V sensor (e.g., CO2 sensor), constant flow, and constant speed.
- Motor: Very low consumption EC motor (50/60 Hz).
- Construction: Galvanized steel (Z275).
- Interface: Ergonomic and intuitive.
- Features: Proximity switch as standard, hygro-adjustable or T.Flow pre-configured regulation mode, compatible with all duct types, centralized system for maintenance savings, alarm relay via electronic card, Modbus RS485 as standard.
- Certifications: C4 certification (400°C - 1/2 hour), compatible with technical opinions for hygro-adjustable ventilation «Bahia» n°14.5/17-2267 and «Daikin and Multizoning Airzone with single-flow hygro Bahia VMC» n°14.5/23-2314_V1. Eligible for CEE: BAR-TH-127.
- Electrical Data: Max Power: 50 W, Max Power (kW): 0.05, IP24 Protection Index, Max Current: 0.5 A, Electrical Supply: Single-phase.
- Dimensions (mm): EA1: 253, EA2: 164, ER1: 295, ER2: 295, H: 408.3, HP: 57.1, HT: 408.3, L: 401.6, LT: 401.6, M1: 42.2.
- Weight: 25 kg.
Accessories
- EasyVEC® 80 Pa pressure switch kit (Ref: 11056439)
- MS PRO V2 D160 discharge sleeve kit + EasyVEC T2 Ø 250 mm connection (Ref: 11025081)
- EASYVEC C4 Modbus remote control (Ref: 11094295)
Services
- Commissioning service available.
Regulatory Compliance
The product complies with regulations and conformity standards, including QB37 identification number: 70/01-CHY6-2267 and technical opinions: 14.5/17-2267_V3 and 14.5/16-2185_V2.
Performance Curves
Aerodynamic curves are established according to NF EN ISO 5801 standard. The curves illustrate static pressure (P in Pa) and power consumption (P in W) in relation to airflow (m³/h).
For more information, please contact your Aldes representative.
RCS Lyon 956 506 828 - Aldes reserves the right to make technical modifications to its products. Information is non-contractual.