Foldable Electric Scooter User Manual
Introduction
Thanks for choosing our product. Have fun with this electric scooter.
Document Overview
This manual provides comprehensive information on your Foldable Electric Scooter, covering:
- The Device & Accessories
- Functions
- Assembling the device
- Charging
- Driving Instructions
- Safety Instructions
- Fold and Transportation
- Daily Maintenance and Storage
- Product Parameters
- Presence of Toxic and Harmful Substances
- Warranty
1. The Device & Accessories
Vehicle: Foldable Electric Scooter
Accessories Included:
- Instructions booklet
- Screws x 4
- Cross Screwdriver
- Charging Adapter
2. Functions
After turning on the Kick scooter, the display will show various indicators. Note: This device does not support Bluetooth function.
Display Indicators:
- Accelerator
- Display
- Signal
- Brake Lever
- Headlight
- Folding mechanism
- Wheel motor
- Kickstand
- Charging port
- Clamp
- Break lights
- Disc Brake
- Brake compartment
Mode Indicators:
- Speed display
- High and low gear
- Total mileage indicator
- Single mileage/total mileage display
- Electric quantity display: Gradually decreases from right to left. Four lamps are on above 38.5v, three lamps are on between 37v-38.5v, two lamps are on between 36v-37v, and one lamp is on between 33v-36v.
- Light display: Front and rear lights are always on.
- Brake display: The tail light flashes when braking.
- Single mileage mark
- Electric quantity warning indicator lamp: Lights up when electric quantity is less than 33v.
Operation:
- Turn On/Off: Long press the switch button for 3 seconds. All indicator lights will illuminate briefly.
- Switch Modes: Press the adjustable gear button to switch modes after booting.
- Mileage Display: After booting, the total mileage is displayed, and the single mileage is reset. The default setting is KM/H.
- Unit Switching: Switch between KM/H (Kilometers per hour) and MPH (Miles per hour) by clicking the gear button three times.
- Auto Shutdown: The device will shut down automatically 10 minutes after no operation.
3. Assembling the Device
Follow these steps to assemble your scooter:
- Straighten the steering rod, close the folding lock, and gather the handle upward.
- Insert screws into the designated holes (screws are attached in the box).
- Use the provided screwdriver to tighten the screws securely.
- Press the power button for 3 seconds to turn on the device.
Power Button Functions:
- To turn on the scooter: Press and hold the Power Button for 3 seconds.
- To turn on the headlight: Press the Power Button two times.
- To switch riding mode: Press the Power Button one time.
- To switch km/h to mph: Press the Power Button three times.
4. Charging Scooter
To charge your scooter:
- Open the charging port cover.
- Connect the charging adapter.
- Close the cover after charging is complete.
5. Driving Instructions
Safety First: Please wear a helmet and other protective equipment, such as knee protection. ⛑️
- Turn on the kick scooter and check if there is enough battery for your ride. ?
- Stand on the pedal with one leg, then push off the ground with the other leg.
- Once moving, place both feet on the pedals and press the accelerate button.
- To slow down, release the accelerate button. The energy recovery system will engage automatically to slow the scooter. For urgent braking, press the left disc brake firmly.
- When turning, lean your body slightly in the direction of the turn. Turn the handlebar slowly when making turns.
6. Safety Instructions
General Safety:
- It is not recommended to drive in the rain. ?️
- It is recommended to slightly bend your knees to adjust to rough roads.
- Please use a low speed (5-10 km/h) on rough roads.
- Be careful not to injure yourself on door frames when riding indoors, such as when entering rooms. ⚠️
- While walking with a scooter, be careful not to accidentally engage the accelerate button while the power is on. ⚠️
- Do not place backpacks or other heavy objects on the handlebar area.
- It is forbidden to place one foot on the running board or on the ground while riding. ❌
Preventing Dangerous Driving:
- It is forbidden to ride the kick scooter on the roadway with other motor vehicles. ❌?
- It is forbidden to make sharp turns when riding in a residential area. ❌
- It is forbidden to drive through deep puddles exceeding 2cm. ❌?
- The kick scooter cannot carry passengers. ❌
- Do not tread on the back of the fender. ❌
- Do not touch the disc brake unnecessarily. ❌
- Do not take your hands off the handlebars while riding. ❌
- Do not ride the electric scooter up or down steps, or jump over obstacles. ❌?
Safety Recommendations:
- The electric scooter is a device for entertainment and not a vehicle. It carries certain risks, so read this user manual before riding.
- When riding in public areas, comply with all safety recommendations. Be aware of potential collisions. Violating traffic rules or improper operation increases the risk of injury. Higher speeds require greater braking distances. Emergency braking can be risky, especially on slippery surfaces. Always be alert, use appropriate speed, and maintain a safe distance from pedestrians and other vehicles.
- Be cautious of pedestrians and children. Reduce your speed and leave adequate space when passing them.
- Strictly follow state and federal road rules. Violations may lead to financial penalties, personal injury, accidents, or legal disputes. The company is not responsible for direct or indirect liability.
- Ensure all other individuals who will ride your electric scooter read this user manual beforehand.
- Inspect your scooter carefully before each use. If you find shattered parts, poor battery life, broken tires, unusual noises when turning, or other abnormal symptoms, stop using the scooter immediately and contact support.
7. Fold and Transportation
Folding the Scooter:
- Ensure the scooter is turned off.
- Hold the front pole, release the lock lever, and lower the steering rack.
- Position the steering rack horizontally and secure it by inserting the hook through the special ring located on the rear wheel mudguard.
Transportation:
You can transport the folded scooter with one hand.
8. Daily Maintenance and Storage
Cleaning and Storing the Electric Scooter:
- Clean your scooter using a soft cloth with soap water.
- Warning: Do not use alcohol or high-pressure water to clean the scooter. Ensure the scooter is turned off. After charging, securely insert the plug back into the charging connector to prevent electric shock or water damage.
- When not in use, store the scooter in a dry, cool place. Leaving the device exposed to direct sunlight can rapidly damage materials, the battery, and wheels. ☀️
Maintenance of Electric Scooter Battery:
- Always use certified batteries. ?
- Do not attempt to open the battery yourself; seek professional advice.
- It is recommended to use the certified AC adapter that came with the original package.
- Improper disposal of used batteries and accumulators causes severe environmental pollution. Please dispose of batteries in accordance with local laws. Do not dispose of batteries with food waste. ♻️
- After each use, charge the battery to prolong its service life. Do not store the battery in rooms with temperatures exceeding 50°C or below -20°C. Avoid storing batteries in hot cars during summer or near fire, as this can deteriorate the battery, cause overheating, or inflammation. ?
- If the scooter is not used for 30 days, store it in a cool, dry place and charge the battery. Recharge the battery every 60 days to maintain its life.
- Avoid fully discharging the device, as this reduces battery life. The battery performs best and offers a longer range at room temperature. Performance may decrease at temperatures below 0°C.
Note: A fully charged scooter has a standby time of approximately 120-180 days. The battery has a smart chip that stores charging/discharging information. Failing to charge the battery for extended periods can cause serious, irreparable damage, which is not covered by free warranty service. (Caution: Do not disassemble the device by unauthorized persons, as there is a risk of electric shock or serious injury from short circuits.) ⚠️
9. Product Parameters
Operating Parameters | Name | H85B parameters | H85B Pro Edition |
---|---|---|---|
Dimensions | Length x Width x Height (mm) | 1090*420*1145mm | |
Folded: Length x Width x Height(mm) | 1090*420*495mm | ||
Weight | Gross weight | 16+-0.5KGS/ 35+-1 LBS | |
Conditions | Max load | 120KG/264LBS | |
Age | 16+ | ||
Height(mm) | 1200-2000mm | ||
Main Parameters | Max speed(km/h) | 25km/h-15.5miles/h | |
Endurance mileage | 15-20km/ 9-12miles (Depending on ground, inclination, speed, driving style) | ||
Maximum slope (°) | 11 | ||
Suitable area | Solid road surface, smooth clay surface to overtime, obstacles high less than 1cm, a depth of pools no more than 2cm | ||
Operating temperature range (°C) | -10-40 | ||
Temperature of storage (°C) | -20-45 | ||
Waterproof level | IPX4 | ||
Battery Parameters | Rated voltages (VDC) | 36v | |
Max voltage of charging (VDC) | 42v | ||
Rated power (Wh) | 270 | ||
Smart battery management system | Stress, insufficient voltage, short circuit, auto sleep/wake up, overheating protection, control of battery using | ||
Motor Parameters | Rated power(W) | 250 | |
Power Adaptor Parameters | Rated power(W) | 54 | |
Rated Input voltage (VAC) | 100-240V | ||
Rated Output voltage (VDC) | 42V | ||
Rated current(A) | 1.5 | ||
Certificate | CE | ||
Charging time(h) | Est. 4~6h |
10. Presence of Toxic and Harmful Substances
The following table indicates the presence of toxic and harmful substances in the device components, according to SJ/T 11364 and GB/T 26572-2011 standards.
Name | Toxic and harmful substances elements | Pb | Hg | Cd | Cr6+ | PBB | PBDE |
---|---|---|---|---|---|---|---|
Power adaptor | X | O | O | O | O | O | |
Battery | X | O | O | O | O | O | |
Connecting pipe | X | O | O | O | O | O | |
Charging port | X | O | O | O | O | O | |
Indicators | X | O | O | X | X | X | |
Circuit board | X | O | O | X | X | X | |
Motor | X | O | O | X | O | O | |
Housing | X | O | O | O | O | O |
Legend:
- O: Toxic and harmful substances in all components are contained in an amount below the limit value, according to standard GB/T 26572-2011.
- X: Presence of toxic and hazardous substances in at least one component exceeds the threshold, according to GB/T 26572-2011.
11. Warranty
- Carefully read all instructions before using the electric kick scooter.
- This product is warranted according to local laws.
- The warranty does not apply to products subjected to misuse, negligence, accidental or abnormal conditions of operation, nor does it cover natural capacity fadeout.
- For repairs, please refer to qualified and authorized personnel.
- Non-professional repairs may cause malfunction, risks, and void your warranty rights.