Cabinet Assembly Instructions
Model: cocx1405
Dimensions
Width: 62.2 inches
Depth: 17.32 inches
Height: 33.86 inches
Important Information
Important: Please read these instructions fully before starting assembly.
Safety and Care Advice
Safety Precautions
- Check you have all the components and tools listed.
- Remove all fittings from plastic bags and separate them into their groups.
- Keep children and animals away from the work area; small parts could be a choking hazard if swallowed.
- Ensure you have enough space to lay out the parts before starting.
- During assembly, do not stand or put weight on the product to avoid damage.
- Assemble the item as close to its final position (in the same room) as possible.
- Assemble on a soft, level surface to avoid damaging the unit or your floor.
- Assembly may be easier with 2 people.
- To reduce the likelihood of damaging your product, ensure any power drill is set on a low torque setting.
Care and Maintenance
- Only clean using a damp cloth and mild detergent; do not use bleach or abrasive cleaners.
- From time to time, check that there are no loose screws on this unit.
- Regularly check and ensure that all bolts and fittings are tightened properly.
- This product should not be discarded with household waste. Take it to your local authority waste disposal centre.
WARNING: To Help Prevent Overturning
To help prevent product toppling over, please follow these steps:
- Use the anti-tip strap or wall fixing method provided (if applicable).
- Do not allow children to climb or hang on the furniture.
- Do not open more than one drawer at a time (if applicable).
- Do not place heavy items in the top drawers (if applicable).
- Do not place heavy items on top of the furniture, unless it has been designed for this purpose.
Components and Fittings
Parts List
| Item Number | Description | Quantity |
|---|---|---|
| 1 | Top Panel | 1 PC |
| 2 | Left Side Panel | 1 PC |
| 3 | Right Side Panel | 1 PC |
| 4 | Shelf | 2 PCS |
| 5 | Middle Shelf / Divider | 1 PC |
| 6 | Back Panel | 2 PCS |
| 7 | Long Back Panel | 2 PCS |
| 8 | Door | 1 PC |
| 9 | Door | 2 PCS |
| 10 | Top Support Bar | 1 PC |
| 11 | Central Divider Support | 1 PC |
| 12 | Horizontal Support Rail | 2 PCS |
| 13 | Back Support Bar | 1 PC |
| 14 | Base Crossbar | 2 PCS |
| 15 | Diagonal Base Support | 2 PCS |
| 16 | Base Side Frame | 2 PCS |
| 17 | Base Central Support | 1 PC |
| 18 | Door Handle | 3 PCS |
Fittings List
| Item Letter | Description | Quantity |
|---|---|---|
| A | M6x10mm Screw | 8 PCS |
| B | M6x12mm Screw | 24 PCS |
| C | M6x30mm Screw | 12 PCS |
| D | Golden M6x40mm Screw | 4 PCS |
| E | M6x40mm Screw | 2 PCS |
| F | M7x40mm Screw | 8 PCS |
| G | M4x12mm Screw | 58 PCS |
| H | M4x18mm Screw | 8 PCS |
| I | Ø7.8x30mm Screw | 2 PCS |
| J | M4x30mm Screw | 2 PCS |
| K | Bracket K | 2 PCS |
| L | Black M6x40mm Screw | 8 PCS |
| M | M6x12mm Screw | 8 PCS |
| N | Bracket N | 4 PCS |
| O | Hinge Screw O | 8 PCS |
| P | M4mm Allen Key | 1 PC |
Tools Required
- Phillips screwdriver (medium & large)
Assembly Steps
Step 1: Assemble Base Frame
Attach the two base side frames (part 16) to the base crossbars (parts 14 and 17). Use four 'D' golden M6x40mm screws to connect the ends of the crossbars (14) to the side frames (16). Use two 'E' M6x40mm screws to connect the central base support (17) to the side frames (16).
Step 2: Attach Diagonal Supports
Attach the two diagonal base supports (part 15) to the assembled base frame. Use eight 'A' M6x10mm screws to secure the ends of the diagonal supports to the frame.
Step 3: Attach Long Back Panels
Attach the two long back panels (part 7) to the rear of the frame. Use eight 'B' M6x12mm screws to fasten the panels to the frame structure.
Step 4: Attach Middle Shelf
Attach the middle shelf/divider (part 5) to the frame. Use two 'F' M7x40mm screws to secure the shelf to the supporting brackets.
Step 5: Attach Side Panels
Attach the left side panel (part 2) and the right side panel (part 3) to the main frame. Use four 'C' M6x30mm screws for each side panel, connecting them to the base and top supports. Additionally, use four 'L' black M6x40mm screws for each side panel, connecting them to the rear support structure.
Step 6: Attach Side Panels (Continued)
Continue attaching the side panels (parts 2 and 3). Use four 'C' M6x30mm screws for each side panel, connecting them to the base and top supports. Use four 'L' black M6x40mm screws for each side panel, connecting them to the rear support structure.
Step 7: Attach Top Support
Attach the top support bar (part 10) and the central divider support (part 11) to the top of the side panels (parts 2 and 3). Use four 'L' black M6x40mm screws to secure these supports.
Step 8: Attach Top Panel
Attach the top panel (part 1) to the assembled frame. Use eight 'B' M6x12mm screws to fasten the top panel to the supporting structure.
Step 9: Install Back Panels
Slide the two back panels (part 6) into the grooves on the back of the cabinet. Secure them using eight 'G' M4x12mm screws, fastening them to the internal supports.
Step 10: Attach Front Lower Trim
Attach the front lower trim (part 6) to the front of the cabinet. Use six 'F' M7x40mm screws to secure it.
Step 11: Install Internal Shelves
Install the two internal shelves (part 4). Secure them using eight 'B' M6x12mm screws and eight 'M' M6x12mm screws. The 'B' screws attach to the side panels, and the 'M' screws attach to the central dividers.
Step 12: Insert Shelves
Insert the internal shelves (part 4) into their designated positions within the cabinet.
Step 13: Attach Hinges to Doors
Attach hinges to the doors (parts 8 and 9). Use sixteen 'G' M4x12mm screws and eight 'O' hinge screws to attach the hinges to the doors.
Step 14: Attach Doors to Cabinet
Attach the doors (parts 8 and 9) to the cabinet frame. Use thirty-two 'G' M4x12mm screws to attach the hinges to the cabinet. Note: Please assemble the door according to the installation steps first. If the cabinet door is deviated, the internal hinge needs to be slowly adjusted to solve the problem.
Step 15: Attach Door Handles and Brackets
Attach the door handles (part 18) to the doors (parts 8 and 9). Use eight 'H' M4x18mm screws to attach the handles. Use four 'N' brackets to secure the internal support for the handles.
Step 16: Install Door Handles
Install the door handles (part 18) onto the doors. Use two 'G' M4x12mm screws for each handle attachment point.
Step 17: Attach Back Support
Attach the back support bar (part 13) to the top rear of the cabinet using two 'J' M4x30mm screws. Secure the bracket K using two 'K' M4x30mm screws.
Step 18: Final Check
Perform a final check of all connections. Ensure all screws and fittings are tightened properly.
