GoodWe ET G2 Series Hybrid Inverter
The ET G2 Series is GoodWe's latest iteration of hybrid inverters, designed to meet the increasing demand for electricity consumption in households. It offers flexible residential solutions with enhanced power generation capabilities.
Key Features
- Elegant and sleek design that complements home aesthetics.
- Available in higher power capacities: 12kW and 15kW for increased energy harvesting.
- Supports parallel connections with up to 6 units for expanding energy needs.
- Integrated dry contact for external loads.
- Backup with UPS-level switching <10ms for fast load response.
- Al-driven AFCI 3.0 for enhanced safety.
- IP66 ingress protection.
- Type II SPD on DC and AC sides.
- Plug & Play installations with an elegant and compact design.
- Unbalanced output up to 150% (for GW10K-ET-20 model).
- Up to 160% PV input oversizing.
- Parallel connection capability for increased output power.
Technical Data Summary
| Feature | GW6000-ET-20 | GW8000-ET-20 | GW10K-ET-20 | GW12K-ET-20 | GW15K-ET-20 |
| Nominal Battery Voltage (V) | 500 | ||||
| Max. Continuous Charging Current (A) | 30 | 30 | 40 | 40 | 40 |
| Max. Continuous Discharging Current (A) | 30 | 30 | 40 | 40 | 40 |
| Max. Charging Power (W) | 9000 | 12000 | 15000 | 18000 | 24000 |
| Max. Discharging Power (W) | 6600 | 8800 | 11000 | 13200 | 16500 |
| Max. Input Power (W) | 9600 | 12800 | 16000 | 19200 | 24000 |
| Max. Input Voltage (V) | 1000 | ||||
| MPPT Operating Voltage Range (V) | 120 ~ 850 | ||||
| Number of MPP Trackers | 2 | 2 | 3 | 3 | 3 |
| Nominal Output Power (W) | 6000 | 8000 | 10000 | 12000 | 15000 |
| Nominal Apparent Power Output to Utility Grid (VA) | 6000 | 8000 | 10000 | 12000 | 15000 |
| Max. AC Current Output to Utility Grid (A) | 8.7 | 11.6 | 15.7 | 21.0 | 26.1 |
| Max. Efficiency | 98.0% | 98.0% | 98.2% | 98.2% | 98.2% |
| European Efficiency | 97.2% | 97.2% | 97.5% | 97.5% | 97.5% |
| Protection Features | Integrated PV Insulation Resistance Detection, PV AFCI 3.0, Residual Current Monitoring, PV Reverse Polarity Protection, Battery Reverse Polarity Protection, Anti-islanding Protection, AC Overcurrent Protection, AC Short Circuit Protection, AC Overvoltage Protection, DC Switch, DC Surge Protection, AC Surge Protection, Remote Shutdown | ||||
| Operating Temperature Range (°C) | -35~+60 | ||||
| Ingress Protection Rating | IP66 | ||||
| Communication | LED, WLAN + APP, RS485, CAN, WiFi + LAN + Bluetooth | ||||
Notes
- *1: The Li-lon battery usually contains two mainstream types: LFP and Ternary Lithium battery.
- *2: Max. input power, not continuous for 1.6*normal power. In Australia, for most PV modules, the max. input power can reach 2*Pn.
- *3: For 1000V system, the maximum operating voltage is 950V.
- *4: When the input voltage ranges from 975V to 1000V, the inverter will enter standby mode, and the voltage returns to 975V to enter normal operation state.
- *5: Please refer to the user manual for the MPPT Voltage Range at Nominal Power.
- *6: According to the local grid regulation.
- *7: Output Voltage Range: phase voltage.
- *8: When the three-unbalance function is activated, the Max. AC Current Output to the on-grid load can reach 13A, 17.4A, 21.7A, 21.7A and 21.7A respectively.
- *9: If the inverter is installed with the 3x25A AC breaker, it is suggested that the consumption and feed-in AC power should be less than 11040W.
- *10: Can be reached only if PV and battery power is enough.
- Please visit GoodWe website for the latest certificates.
Contact Information - India
- Service: +91 93558 86166
- Service.in@goodwe.com
- Sales: Sales.india@goodwe.com
- Landing page: https://en.goodwe.com/india
