Comsol 4000mAh Mirror Power Bank
Model: PMR04BU / PMR04PK
User Manual v1.1
A circular, white power bank with a mirrored surface. It features a single USB-A output port and a micro USB input port on its side. The product is shown resting on a surface, with a soft LED light emanating from its edge.
Features
- Battery type: Lithium-Polymer
- 4000mAh capacity provides approximately 140% extra battery for an average smartphone (based on iPhone 8 with 1821mAh battery).
- Offers up to 10 hours of streaming video playback on an iPhone 12 or 8 hours on a Samsung Galaxy S20.
- Features a soft LED illuminated make-up mirror with a normal top side and a 2x magnification bottom side.
- Equipped with four LED indicators to display remaining battery capacity.
- Incorporates a Smart Power Chip that identifies connected devices and delivers maximum power for efficient charging.
- Includes a high-power 2A USB-A port suitable for fast charging iPads or tablets.
- Rechargeable more than 500 times.
- Comes with a 30cm micro USB cable for charging the power bank.
- Built-in protection against overcharging and short circuits.
- Watt Hour Rating: 14.8Wh
- Micro USB Input: DC 5V 2A
- USB-A Output: DC 5V 2A
- Total Output: 10W
- Charging Time: 4 to 8 hours, depending on the charger used.
- Dimensions: 91.2mm (Length) x 63.8mm (Width) x 23.7mm (Height)
- Weight: 176g
- Certifications: RCM, RoHS, UN38.3
Charging the Power Bank
- Using the included micro USB cable, connect the larger USB-A connector to a USB wall charger.
- Connect the smaller micro USB connector to the input port on the power bank.
- During charging, the LEDs will flash to indicate the charging status.
- When charging is complete, the LEDs will remain illuminated.
Charging a Phone or USB Device
- Using your device's charging cable, connect your phone or device to the USB-A output port on the power bank.
- Charging should commence automatically upon connection.
- If charging does not start, unplug and replug the USB-A cable on the power bank.
- When your phone or device is fully charged, the power bank will automatically power off.
Checking Remaining Capacity
- Connect a cable to the USB-A port on the power bank; the LEDs will indicate the remaining capacity.
- The LEDs will automatically turn off after approximately 30 seconds.
| LED On/ Off/ Flashing | Remaining Capacity |
|---|---|
| One LED flashing | Less than 5% |
| One LED on | 5% to 25% |
| Two LEDs on | 25% to 50% |
| Three LEDs on | 50% to 75% |
| Four LEDs on | 75% to 100% |
CAUTION
- Do not drop, misuse, or apply excessive force to the power bank. Power banks contain batteries and fragile components that can be damaged if misused. Discontinue use immediately if the power bank is dropped or damaged.
- If crushed, punctured, exposed to fire or high temperatures, or disassembled, batteries may catch fire, explode, or cause burns.
- If the power bank swells or bulges, stop use immediately and dispose of it appropriately. Continued use may lead to fire or explosion.
- Do not charge the power bank and your device simultaneously, as this may cause the power bank to overheat.
- Store the power bank in a cool, dry place, avoiding hot or humid environments such as cars or direct sunlight.
- Supervise children when they use the power bank.
- Avoid placing the power bank in bags with small metal objects that could cause a short circuit (e.g., handbags, backpacks).
- Do not dispose of the power bank in heat or fire.
- Comsol power banks feature safety power cut-off functions to prevent overcharging and overheating. It is recommended to disconnect the power bank and remove all cables once fully charged.
- It is normal for the power bank to feel warm when charging a device; this does not indicate a cause for concern.
- Battery performance naturally declines over several years under normal conditions.
- Recommended operating temperature: 10°C to 45°C.
iPhone, iPad, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
* 140% extra battery is based on an iPhone 8 with a battery capacity of 1821mAh.
Made in China
Certifications: RCM, RoHS, UN38.3
