Important Information
This manual provides essential instructions for the safe installation and use of your Graco SnugRide SnugLock 35 DLX infant car seat. Please read and understand all instructions before use to ensure your child's safety.
Key Features:
- Designed for children weighing 4-35 lbs (1.8-16 kg) and up to 32" (81 cm).
- Multiple installation options: LATCH system or vehicle seat belt.
- Emphasis on proper harness adjustment for a secure fit.
- Guidance on selecting the correct seating location and installation methods.
Safety First
WARNING: Failure to follow instructions can lead to serious injury or death. Always ensure the car seat is installed correctly and the child is properly secured.
- Never place a rear-facing child in a seating position with an active front air bag.
- Review your vehicle owner's manual for specific information regarding air bags and car seat installation.
- This child restraint has a useful life of 7 years from the date of manufacture.
Getting Started
Familiarize yourself with the car seat's features and components by reviewing Section 2-A. Understand the different installation methods for both the base and the carrier.
Installation:
- Base Installation: Use either the LATCH system or the vehicle seat belt. Do not use both simultaneously.
- Carrier Installation: The carrier can be installed using only the vehicle seat belt.
For detailed step-by-step instructions, refer to the relevant sections within this manual.
Care and Maintenance
Keep your Graco car seat clean and well-maintained. Refer to the 'Care & Cleaning' section for guidance on cleaning the seat pad and buckle.
Additional Resources
For further information and safety resources, visit:
