Owner's Manual for Uniden models including: iGO CAM 445 Dash Cam Vehicle Recorder, iGO CAM 445, Dash Cam Vehicle Recorder, Cam Vehicle Recorder, Vehicle Recorder, Recorder
1 day ago — (C) Improperly installed contrary to instructions contained in the relevant. Owner's Manual. (D) Repaired by someone other than an authorized Uniden Repair ...
File Info : application/pdf, 24 Pages, 697.29KB
DocumentDocumentiGO CAM 445
Dash Cam Vehicle Recorder
For more exciting new products please visit our website: Australia: www.uniden.com.au
Important Safety Instructions
NOTE
Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture.
NOTE
This product is intended for use in a motor vehicle. Don't install the device where it will block the driver's view of the road (including the mirrors!) or the deployment of the airbag.
NOTE
Keep your attention on the road! Don't try to operate or focus on any device while driving. If you have to concentrate on a device, pull off the road for a few minutes.
NOTE
Ensure that the camera lens is kept clean and there is nothing blocking the lens.
NOTE
Don't leave the device in direct sunlight for a long period of time or where the temperature could go above 60°C.
NOTE
You should examine, check and/or verify the device at least once a month including the associated SD card, to ensure the recording are working properly.
NOTE
Never attempt to disassemble, repair or make any modifications to your device.
UNIDEN iGO CAM 445
2
Vehicle Recorder
Contents
Important Safety Instructions ............................................. 2 What's In The Box...................................................................4
Make Sure These Items Arrived in the Box .................................................4 Controls & Indicators ............................................................ 5 Installation ............................................................................ 7
Location .................................................................................................................. 7 Installing the Camera ........................................................................................ 7 Installing the Optional Hardwiring Kit .........................................................8 Operation .............................................................................. 9 Micro SD Card ....................................................................................................... 9 Power On ............................................................................................................. 10 Power Off ............................................................................................................. 10 Recording .............................................................................................................11 Using the App .................................................................................................... 12 Device Settings ................................................................................................. 16 Troubleshooting ................................................................................................18 Specification .......................................................................................................19 Warranty ............................................................................20
UNIDEN iGO CAM 445
3
Vehicle Recorder
What's In The Box
Make Sure These Items Arrived in the Box
Uniden Camera with sticker mount bracket attached
Cigarette Charger
· Protection film x 2 · 3M Sticker · Installation Kits · Owner's Manual
· If any item is missing or damaged, contact your place of purchase
immediately. Never use damaged products!
· Need help? Get answers at our website:
www.uniden.com.au for Australian model.
UNIDEN iGO CAM 445
4
Vehicle Recorder
Controls & Indicators
Uniden iGOCAM 445
1
2
3 5
7
4
6
8
9
Memory card icon WiFi icon Audio Recording icon Time
UNIDEN iGO CAM 445
5
Vehicle Recorder
Ref Component
1
Sticker Mount
2
Lens
3
Micro SD Card
Slot
4
Type-C USB
charging port
5
Microphone /
Speaker
6
Reset button
7
Wifi Key (Smart
One
Touch Button)
8
REC
9
Display
Description
Insert micro SD Card (up to 256GB min Class U3).
Short press: Lock video. Press two times to turn on/off audio recording. Press and hold 3 seconds turn on/off WiFi. Press and hold 8 seconds to format SD card and rest to factory reset. RED Blinking: Recording normal video. YELLOW Blinking: Recording locked video. 0.96 inch
UNIDEN iGO CAM 445
6
Vehicle Recorder
Installation
Location
To have a better view, try to install the camera at the center of the windshield. Make sure the lens is located in a place where the windshield is clean to ensure the view is clear.
Make sure the device is not installed in a place where it will interfere with the airbag.
Installing the Camera
1. The sticker mount bracket comes pre-installed with the camera. Otherwise, slot the sticker mount bracket into the device bracket slot and make sure it fits tightly.
2. Clean the area you desire to have the dash cam placed before sticking the device.
3. Peel off the 3M sticker protective film from the mount bracket. 4. Press and apply force on the mount onto the windshield behind the rear-
view mirror.
5. Arrange and hide the cables to avoid obstruction for the driver's view.
6. Adjust the viewing angle of the camera by rotating the body of the camera. We recommend the camera should point slightly downwards ~10° below eye level.
NOTE
Do not install the product in a location where it can obstruct the driver's field of vision.
UNIDEN iGO CAM 445
7
Vehicle Recorder
Installing the Optional Hardwiring Kit
If you wish to use the parking mode on the camera, you will need to install the hardwiring kit provided.
1. Locate the location of the fuse box in your vehicle.
2. There are 3 wires that need to be connected: connect the Yellow cable that goes to a constant fuse, RED cable that goes to an ignition-switched fuse and BLACK cable that goes to a metal ground bolt.
YELLOW cable connect to BATTERY (+) RED cable connect to car ACC
BLACK cable connect to car GROUND
3. Connect the USB-C end of the hardwiring cable to the camera Type-C USB port.
4. Start your vehicle to see if it works. Arrange and hide the cables to avoid obstruction for the driver's view.
It is advisable to get a car electrician to professionally install the hardwiring kit.
NOTE
Before installing the HWK-3, please ensure there is no SD Card installed on the camera unit. Only install the SD card once the HWK-3 is finish installing.
UNIDEN iGO CAM 445
8
Vehicle Recorder
Operation
Micro SD Card
The device support micro SDXC cards (Extended Capacity SD) up to 128GB in capacity. A micro SD card of at least 32GB capacity and minimum speed of Class U3 is required.
Insert the micro SD card gently in the slot at the side of the unit and press and hold the WIFI (Smart One Touch) button for 8 seconds for the voice prompt to format the micro SD Card for first use. To remove the card from the slot, please ensure the unit is powered off and press the edge of the micro SD card inwards for it to pop out and then pull it out of the slot.
It is important to format the micro SD card before using it, so as to avoid any damage to the files created on iGOCAM 445
Uniden only recommends using good quality MLC/SLC Endurance micro SD cards for dash cam recording. Please check with SD card manufacturer to ensure that the SD card used is rated for Dash Cam recording.
Video Storage Capacity
Refer to the table below for reference for the recording time for different card capacity and some of the recording resolution.
Resolution
32GB 64GB 128GB 256GB
1440P
120 mins 240 mins 480 mins 960 mins
1080P
120 mins 240 mins 480 mins 960 mins
NOTE
A compatible micro SD card has to be inserted before you start using the unit. Ensure that the unit is switched off before inserting or removing the micro SD card.
NOTE
Sticker mount is difficult to remove after it is installed and will not stick well on a curved/textured or wet surface.
UNIDEN iGO CAM 445
9
Vehicle Recorder
Power On
NOTE
When connected to a car charger with power, the camera will automatically power on and start recording.
1. Connect the other end of the DC car adaptor to your car's cigarette lighter.
2. Connect the DC car TYPE-C adaptor to the power connector USB-C port found on the camera.
3. The camera will power on automatically when the car supplies the power to the camera.
NOTE
Be sure insert the SD card before powering up the device. Format the SD card before you start recording for the first time.
Power Off
When the car's engine is turned off, the device will automatically turn off in a few seconds.
Power Information
The device is designed mainly for in-vehicle use, drawing on vehicle power or the vehicle battery when using the hardwing kit (HWK-3).
The iGOCAM 445 has an in-built high quality, long life supercapacitor. It provides enough backup power to ensure any recording in progress is stored safely before shutting the camera off.
NOTE
For the first time use, it is advisable to format the SD Card.
Press and hold the WiFi (Smart One Touch) button for 8 seconds to format the SD Card.
UNIDEN iGO CAM 445
10
Vehicle Recorder
Recording
When connected to a car charger with power, the unit automatically goes into the record mode and starts recording.
NOTE
To record a video, ensure that a valid micro SD card is inserted in the given slot. Also note, that inserting/removing the SD card when the device is recording causes the device to shutdown and in worst case missing recording files.
Protect the Current Recording
While recording, if you want to protect the current recordings, then SHORT PRESS the Smart One Touch button ONCE. Those recordings have been locked and will not be overwritten by normal video recordings.
This also applies when the G-Sensor registers an impact while recording.
UNIDEN iGO CAM 445
11
Vehicle Recorder
Using the App
The "iGOCAM" App allows you to control the iGOCAM445 camera via WiFi. You can easily preview, browsing files, playback and download the files in the SD card into your mobile phone. The App also allows you to make changes to the device setting.
The iGOCAM445 camera WiFi access point is On by default. You can confirm this with the WiFi (Smart One Touch Button).
NOTE
Connect your mobile phone to your iGOCAM within a line of sight range of 5m.
NOTE
Press and hold the WiFi button for 3 seconds to turn on/off the WiFi access point.
1. Search and download the "iGOCAM" from the App Store for iOS devices or Play Store for Android devices.
2. Go to your mobile phone WiFi setting and connect to the camera's access point. The SSID usually starts with UNIDEN-iGOCAM445 and the default password is 12345678.
3. Go to the App and tap the camera.
NOTE
If issue arrises from accessing the camera via APP for the first time, please format the SD Card by press and hold the Smart
One Touch button for 8 seconds.
UNIDEN iGO CAM 445
12
Vehicle Recorder
Home Screen
When your mobile phone is connected to the camera's WiFi access point, the camera image will show on the home screen.
Camera is connected
Camera is not connected
Camera Tap to view live video stream from the camera, take a snapshot, and view camera settings.
Downloaded Video Tap the Downloaded Video tab to view or playback downloaded photos or videos even when then the camera is not connected.
About Tap to view App information or clear App cache data.
UNIDEN iGO CAM 445
13
Vehicle Recorder
Live View Back
SD Card File Recording Timer
Snapshot Recording Switch
File
Switch Mode
Device Settings
Full Screen Mode Recording Resolution Sound recording Resolution settings Camera View Switch
UNIDEN iGO CAM 445
14
Vehicle Recorder
Back Return to home screen.
SD Card When SD card is not inserted, the device will shut down. Voice reminder "Please insert TF Card".
File Recording Timer Indicates the loop recording timer.
Snapshot Take a quick snapshot and save to the SD card.
Recording Switch Start/stop the connected camera recording.
File Tap the File to access the saved snapshots or videos onto the SD Card. You can tap to the video file to play directly or download the video file to the mobile phone storage.
Display Mode Not applicable for iGOCAM 445 series camera.
Camera View Switch Switch camera view between front and rear camera.
Resolution Settings Tap to change the recording resolution. You will need to stop the recording to make changes.
Sound Recording Turn on/off the connected camera audio recording.
Recording Resolution Indicates the selected recording resolution.
Full Mode Tap to view live video preview in full screen mode.
Device Settings Modify camera settings.
NOTE
You can change WiFi SSID and password in the Camera Settings using the App.
UNIDEN iGO CAM 445
15
Vehicle Recorder
Device Settings
NOTE
Please note that to access the Device Settings, the device required to stop recording.
Pair your mobile phone with the Dash View camera and go to live view screen. Stop the recording and tap the device settings icon to access settings menu. Any changes to the settings will take effect concurrently.
Video Settings Resolution
Loop Recording WDR
Exposure Time Stamp Record Audio Volume Fatigue Driving Reminder Model Logo
Set the recording resolution for the front camera. The options available are: 2560x1440P 30fps and 1920x1080P 30fps. Higher resolutions will give you a sharper image, but take up more memory on the card.
Use this option to set the length of each video clip. 1min(Default)/2mins/3mins
Turn on/off the Wide Dynamic Range (WDR) feature to improves the overall exposure throughout your entire image.
+2.0 ~-2.0.
Opt to have the date and time displayed on the recordings.
Use this setting to enable or disable audio recording.
Adjust the camera volume level. OFF/Low/Middle/ High.
OFF/1H/2H/4H
Show Model name
Show Uniden Logo
UNIDEN iGO CAM 445
16
Vehicle Recorder
Other Settings
Parking Mode
Parking mode settings will only appear when the unit powered with the optional Hard Wire Kit (3Lead). The unit must have sufficient external power supplied in order to record in parking mode.
Time Lapse Parking Mode: After the ACC current is cut off, the unit will enter time-lapse recording mode (1 fps and playback in 30fps).
Collision Detection Parking Mode: This mode turns on the unit if it detects impact and will record for 60 seconds.
WiFi Settings
Change WiFi SSID and WIFI Pasword
G-Sensor
This functions helps protect/lock video files in case of a sudden movement/collision. You can
change the sensitivity level of the G-sensor.
Luminaire Frequency
Change depending on the electrical power frequency in your area (Default setting is 50Hz and you may not have to change this setting).
Date & Time
Sync the device time with the mobile phone time.
Car Plate Number Tap to edit the car plate stamp.
SD Card Storage Indicates the remaining capacity of the inserted SD card.
Format SD Card
Use this option to format the SD card. (All files will be permanently erased.)
Default Setting Factory default setting.
Factory Default Settings
Resets the device to factory settings. Note that restoring defaults will not erase data on the SD card.
Device Information Display the device firmware version.
UNIDEN iGO CAM 445
17
Vehicle Recorder
Troubleshooting
Listed below are some of the problems and the possible solutions.
General Problems
The device cannot take snapshot or record videos
The device automatically stops when recording
Possible Solutions
· Ensure that the SD card is formatted
properly and inserted correctly.
· Use the recommended type of SD card
(minimum 32GB Class U3)
Video is unclear
Ensure that there are no fingerprints or dirt on the lens. Ensure that the lens is always kept
clean.
Cross-stripe interference This is due to the light frequency. Change the
in an image
light frequency depending on the light source.
The device crashes/ freezes
Press the `Reset' button, with a pin, to restart the device.
SD Card Error
Please format the SD card and use recommended card only. Please make sure the SD card is recommended dash cam use.
Display turns off after a few minutes
Please check the LCD Auto Off setting and select Always On.
Memory card is full
Please allow loop recording to overwrite
older recording files or delete unwanted files including emergency recordings.
Camera feels warm during operation
It is normal for the camera to get warm during operation. Please bear in mind that the if the camera is exposed to high temperature for a long period of time, it might fail to boot up. Cool it down and try again.
If you still require assistance, visit our website or call our customer service.
UNIDEN iGO CAM 445
18
Vehicle Recorder
Specification
Aperture Video Resolution Frame Rate Loop Recording Audio Recording Viewing Angle WDR Date and Time Stamp Parking Mode G-Sensor Video Format Video Codec Audio Codec WiFi Access Point Storage Power Input Battery Operating Temperature Storage Temperature Working Humidity
F = 1.8 2560x1440/1920x1080 30fps Yes Yes 140° Yes Yes Yes (requires HWK-3) Yes MP4 H.264 AAC 2.4GHz (up to 10m line of sight) microSD (up to 128GB), Class 10/U1 and above 5V 1.5A Built-in Super Capacitor -10°C ~ 60°C -20°C ~ 70°C 10 ~ 80%
UNIDEN iGO CAM 445
19
Vehicle Recorder
Warranty
UNIDEN
IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service
Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below.
Warrantor: The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 ("Uniden Aust").
Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the iGOCAM 445 ("the Product"), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Warranty period: This warranty to the original retail purchaser is only valid in the original country of purchase for a Product first purchased either in Australia or New Zealand and will expire one (1) year from the date of the original retail sale.
If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be:
(A) Damaged or not maintained in a reasonable manner or as recommended in the relevant Uniden Owner's Manual;
(B) Modified, altered or used as part of any conversion kits, subassemblies or any configurations not sold by Uniden Aust;
(C) Improperly installed contrary to instructions contained in the relevant Owner's Manual
(D) Repaired by someone other than an authorized Uniden Repair Agent in relation to a defect or malfunction covered by this warranty; or
(E) Used in conjunction with any equipment, parts or a system not manufactured by Uniden.
Parts Covered: This warranty covers the Product and included accessories.
User-generated Data: This warranty does not cover any claimed loss of or damage to user-generated data (including but without limitation phone numbers, addresses and images) that may be stored on your Product.
UNIDEN iGO CAM 445
20
Vehicle Recorder
Statement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include any reimbursement or payment of any consequential damages claimed to arise from a Product's failure to comply with the warranty.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
This warranty is in addition to and sits alongside your rights under either the COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES ACT (New Zealand) as the case may be, none of which can be excluded.
Procedure for obtaining warranty service: Depending on the country in which the Product was first purchased, if you believe that your Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make a backup copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged during warranty service.
UNIDEN AUSTRALIA PTY LTD Phone: 1300 366 895 Email: custservice@uniden.com.au
UNIDEN iGO CAM 445
21
Vehicle Recorder
© 2023 Uniden Australia Pty Limited. Printed in China V1.0