Product Illustration
The product is a compact, rounded Bluetooth speaker with integrated wireless charging capabilities.
Diagram Description:
The illustration shows a sleek, rounded speaker. The top surface is designed for wireless charging, and the front/side features controls and ports.
- 1. Wireless Charger Transmitter: The top surface where compatible devices are placed for wireless charging.
- 2. Wireless Charger Indicator: A small LED light that indicates the status of the wireless charging function.
- 3. Bluetooth Speaker On/Off: A control to power the Bluetooth speaker on or off, and likely to initiate Bluetooth pairing.
- 4. TYPE-C: A modern USB Type-C port used for powering the device.
Dimensions:
- Height: 67.5mm
- Length/Width: 150mm
Range of Application
This device is compatible with and can connect to various electronic devices:
- ? Laptop/PC
- ? iPod
- ▶️ Media Player
- ? iPad
- ? Media/iPhone
Product Parameters
| Parameter | Specification |
|---|---|
| Input voltage | DC 5V 1A |
| Audio output power | 5W*2 |
| SNR (Signal-to-Noise Ratio) | ≥85db |
| Wireless charger power | 5W |
| Built-in battery for speaker | 2500mAH |
Operation Instructions
- Power Connection: Connect the wireless charger Bluetooth speaker to a compatible adapter or mobile power supply. The red indicator light will illuminate, signifying power connection. This light will extinguish upon full charge.
- Wireless Charging Operation: Place devices equipped with wireless receivers (such as smartphones) directly onto the speaker's wireless charging panel. The connected device will indicate its charging status.
- Using External Receivers: For mobile devices lacking an integrated wireless receiver, an external wireless receiver board is required. First, connect the mobile device to this receiver board. Subsequently, place the combined unit onto the speaker's wireless charging panel. The device will then display its charging status.
- Charging Indicator: When the wireless charger is actively charging a mobile device, the blue indicator light will emit a pulsing glow.
Music Playing in Bluetooth Mode
- Activate Bluetooth Mode: Power on the product by activating its power source and shifting the dedicated Bluetooth switch to the "ON" position.
- Pairing: On your mobile device, enable the Bluetooth function. Search for available devices and select "B85" to initiate pairing.
Safety Information
Please carefully read the following safety instructions to prevent dangerous situations during the use of this product:
- Avoid direct contact with the wireless charger surface if it becomes excessively hot, to prevent potential burns.
- Do not position the product near heat-generating appliances such as heaters, microwave ovens, rice cookers, or pressure cookers. This is to prevent overheating and mitigate fire risks.
- Refrain from dropping or striking the product forcefully, as this could lead to damage or potential explosions.
- When children are using the product, ensure they are supervised by an adult to guarantee safe and proper operation.
- Avoid using the product in environments with low temperatures or high humidity. The recommended operational environment is between 0°C and 50°C.
- Do not attempt to disassemble or repair the product yourself. Unauthorized repairs may void warranties and cause further damage.
- Keep magnetic stripe cards (e.g., credit cards, identification cards) away from the product to prevent magnetic data erasure (demagnetization).
- Maintain a minimum distance of 20cm between this product and medical equipment to prevent any potential interference.
- Do not place foreign objects, particularly metallic items or magnets, onto the wireless charging coil area. This is to prevent overheating caused by these objects, which could lead to burns.
- Prior to charging other electronic devices with this product, ensure that any metal ornaments or accessories on the contact surfaces of both the device to be charged and the charging product are removed.
- When the product is not in use, disconnect the charger from the power outlet. This conserves energy and helps prevent premature wear or damage to the wireless charger's lifespan.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference.
- (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
The distance between user and products should be no less than 20cm.
