User Manual for SKYDANCE models including: LV, 0-1-10V LED Dimming Driver, LED Dimming Driver, Dimming Driver, LV, Driver
User Manual Ver 1.0.5 Operation temperature Case (temperature Max.) Environment rating IP20IP Dimming data 0/1-10V Dimming range 0 -100%
0/1-10V LED Dimming Driver Model No.: LV 0-10V or 1-10V signal input/PWM Constant voltage output/Logarithmic dimming Features 1 channel 0/1-10V input, 1 channel PWM constant voltage output. 0~100% dimming range via logarithmic characteristic can be very comfortable for human eyes. Compatible with active or passive 0-10V, 1-10V dimmer, can solve the fluorescent lamp dimming system compatible with LED lighting. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type 5-36VDC 8.5A 5-36VDC 1CH,8A 40W/96W/192W/288W (5V/12V/24V/36V) Constant voltage Warranty and Protection Warranty 5 years Protection Reverse polarity Short circuit Weight Net weight Gross weight 0.043kg 0.053kg Dimming data Input signal Dimming range Dimming curve PWM Frequency 0/1-10V 0 -100% Logarithmic 500Hz Safety and EMC Health Safety EN 62479:2010 EN 62368-1:2020+A11:2020 EMC ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 User Manual Ver 1.0.7 Mechanical Structures and Installations GND 0/1-10V signal input Installation rack LED output LED output + Power input Power input + Installation rack 33mm Wiring Diagram LV 0/1-10V LED Dimming Driver 97mm 18mm OUTPUT + INPUT 0/1-10V Single color LED strip + INPUT 5-36VDC + + 0/1-10V dimmer AC100-240V Power Supply 5-36VDC Constant Voltage Note: The 0/1-10V input is operable via commercially available simple rotary wall switchs designed for 0/1-10V dimming equipment or from decicated system central dimming controllers. Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1). We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 50 pieces, The maximum length of the wires from dimmer to LED driver should be no more than 50 meters. Dimming Curve PWM duty(%) 100 Gamma=1.6 90 80 70 60 50 40 30 20 10 1.0 2.0 3.0 4.0 5.0 6.0. 7.0 8.0 9.0 10.0 0/1-10V(V)Corel PDF Engine Version 16.1.0.843 CorelDRAW X6