Product Specifications
| Chip | Intel® JHL8540 Thunderbolt™ 4 Controller |
|---|---|
| Back Panel Connectors |
|
| Internal Connectors |
|
| Interface | PCIe 3.0 interface (PCIe x4) |
| Data Transfer Rate | 40 Gbps Bi-directional per port |
| Supported Operating Systems | Support for Windows 10 (64-bit) with RS3 or later |
| Compatible Motherboards | Go to GIGABYTE's website for the latest motherboard support list. |
Note 1: Actual resolutions supported are dependent on the graphics card being used.
Note 2: Due to hardware limitations, the DisplayPort connector, Thunderbolt™ 4 connector 1, and Thunderbolt™ 4 connector 2 require signal input from external devices and support up to two display outputs at a time.
Product Overview
The GIGABYTE GC-MAPLE RIDGE is an add-in card designed to provide advanced connectivity, primarily featuring Thunderbolt™ 4 technology.
GC-MAPLE RIDGE Card Layout
The add-in card features the following ports and connectors:
- DisplayPort: For video output.
- Thunderbolt™ 4 Port 1 & 2: High-speed data and display ports.
- Mini-DisplayPort In Port 2 (DP IN 2) & Mini-DisplayPort In Port 1 (DP IN 1): For video input to enable Thunderbolt™ functionality.
- PCIe x4 Interface: Connects to the motherboard's PCIe slot.
- PCIe Power Connector: For auxiliary power.
- USB Connector: For USB connectivity.
- 5-pin Thunderbolt™ header: Internal header for Thunderbolt™ connectivity.
- 3-pin Thunderbolt™ header: Internal header for Thunderbolt™ connectivity.
Included Accessories
The package typically includes the following cables:
- Mini-DisplayPort Cable x 2
- USB 2.0/1.1 Header Cable x 1
- Thunderbolt™ Header Cable (5-pin) x 1
- Thunderbolt™ Header Cable (3-pin) x 1
Installation Guide
Step 1: Install the GC-MAPLE RIDGE add-in card.
Insert the GC-MAPLE RIDGE add-in card into an available PCIEX4 slot on your motherboard.
Step 2: Connect the USB cable to the card.
Connect one end of the USB cable to the USB connector on the GC-MAPLE RIDGE card.
Step 3: Connect the USB cable to the motherboard.
Connect the other end of the USB cable to the F_USB connector on the motherboard.
Step 4: Connect the 5-pin Thunderbolt™ header cable.
Connect one end of the 5-pin Thunderbolt™ header cable to the 5-pin Thunderbolt™ header on the GC-MAPLE RIDGE add-in card.
Step 5: Connect the 5-pin Thunderbolt™ header cable to the motherboard.
Connect the other end of the 5-pin Thunderbolt™ header cable to the appropriate Thunderbolt™ add-in card header on your motherboard. Note: The 5-pin cable may have multiple connectors; ensure you use the correct one for your motherboard.
Step 6: Connect the 3-pin Thunderbolt™ header cable.
Connect one end of the 3-pin Thunderbolt™ header cable to the 3-pin Thunderbolt™ header on the GC-MAPLE RIDGE add-in card.
Step 7: Connect the 3-pin Thunderbolt™ header cable to the motherboard.
Connect the other end of the 3-pin Thunderbolt™ header cable to the appropriate Thunderbolt™ add-in card header on your motherboard. Note: Connector support depends on motherboard models.
Step 8: Connect PCIe power.
Connect the power cables from your power supply to the two PCIe power connectors on the GC-MAPLE RIDGE card.
Step 9: Connect display devices.
Use the included Mini-DisplayPort cables to connect your graphics card and displays:
- 9-1: Connect the Mini-DisplayPort In port on the GC-MAPLE RIDGE card to the DisplayPort on your graphics card.
- 9-2: Connect your Thunderbolt™ device or DisplayPort monitor's cable to the appropriate Thunderbolt™ 4 connector on the GC-MAPLE RIDGE add-in card.
Display Connection Scenarios:
- One DisplayPort Monitor: Connect a Mini-DisplayPort cable to DP IN 1. Connect the monitor's cable to the DisplayPort connector or Thunderbolt™ 4 connector 1 on the GC-MAPLE RIDGE card.
- Two DisplayPort Monitors: Connect one Mini-DisplayPort cable to DP IN 1 and the monitor's cable to the DisplayPort connector or Thunderbolt™ 4 connector 1. Connect the second Mini-DisplayPort cable to DP IN 2 and the monitor's cable to Thunderbolt™ 4 connector 2.
Important: Ensure your motherboard's BIOS is updated to the latest version.
Daisy-Chaining Thunderbolt™ Enabled Devices
Refer to the following for connecting Thunderbolt™-enabled devices in a daisy-chaining configuration. Ensure devices to be daisy-chained have both Thunderbolt™ input and output ports.
Configuration Examples:
- Five Thunderbolt™ devices: Connect devices sequentially.
- Five Thunderbolt™ devices and one native DisplayPort monitor: Requires a graphics card with DisplayPort output. Connect devices sequentially, with the monitor connected to the last Thunderbolt™ device or directly to the GC-MAPLE RIDGE card if supported.
- Five Thunderbolt™ devices and three DisplayPort monitors: Requires a graphics card with DisplayPort support. Connect devices sequentially, with monitors connected to the last Thunderbolt™ devices or directly to the GC-MAPLE RIDGE card if supported.
Driver Installation
After the computer starts, install the driver for the GC-MAPLE RIDGE add-in card. Insert the included driver disc and follow the on-screen instructions.
Alternatively, visit GIGABYTE's global website (https://www.gigabyte.com) and navigate to Support & Downloads to find the latest software driver.
Regulatory Information
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device.
Canadian Department of Communications Statement
This digital apparatus does not exceed Class B limits for radio noise emissions and complies with Canadian ICES-003.
European Union (EU) CE Declaration of Conformity
This device complies with Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, and RoHS directive (recast) 2011/65/EU & 2015/863.
RoHS and WEEE Compliance
GIGABYTE products are designed to be safe and comply with RoHS requirements, avoiding hazardous substances. The company also adheres to the WEEE Directive for proper disposal of electronic equipment.
BSMI and China RoHS Compliance
The product also meets BSMI CNS15663 standards for restricted substances and China RoHS compliance requirements.
Contact Information
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
TEL: +886-2-8912-4000, FAX: +886-2-8912-4005
Support: https://esupport.gigabyte.com
Website: https://www.gigabyte.com
Copyright & Disclaimer
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes may be made without prior notice. Reproduction, copying, translation, transmission, or publication in any form requires GIGABYTE's prior written permission.
Environmental Information
To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment. ?
The product is designed for an environment-friendly use period of ten years ?. Hazardous substances contained within will not leak or mutate during normal use, preventing severe pollution or damage to human health or property.
GIGABYTE - eSupport
