Celly TRAINERBAND Fitness Bracelet User Manual

Introduction

Please read this manual and pay attention to the safety warnings before using the product. Keep the manual for future reference or if passing the product to a third party. Esprinet S.p.A. is not responsible for injury or damage caused by improper use of the product. The results of the functions offered are for reference only and are not intended for medical testing or as a judgment on the body's health.

System and Hardware Requirements

• Android 4.4 or later
• iOS 8.0 or later

Preparation and Connection

Preparation: The product must be activated by fully charging it before first use. Press and hold the right power button. Ensure the device remains sufficiently charged. Hook the connector to the product body and insert it into a charger's USB port for activation (ensure correct insertion and current).

Connection: Verify your phone meets the requirements. Download the 'Da Fit' or 'FitPro' app from the App Store or Android store. Scan the QR Code provided to connect.

Association: Ensure your smartphone's wireless functionality is turned on. Open the FitPro app, search for and select 'T-BAND' to pair the device. Touch the product screen to wake the device and complete pairing.

Usage

Once connected to the app, the device will sync the time and record/analyze your activities, oxygen saturation, heart rate, and blood pressure.

Touch Key Operation:

• Single touch: Switch interface
• Press and hold: Enter

Bracelet Functions

The bracelet cycles through the following modes:

1. Time
2. Pedometer
3. Distance Traveled
4. Calorie Mode
5. Heart Rate Mode
6. Blood Pressure Mode
7. Oxygen Saturation Mode
8. Messages

Detailed Functions

1. Time Mode: Displays time, battery status, date, heart rate, and steps. Press and hold the touch key to switch interfaces.
2. Pedometer: Automatically records the number of steps taken.
3. Distance Traveled: Automatically records the distance covered.
4. Calorie Mode: Displays the number of calories burned.
5. Heart Rate Monitor: Measures heart rate automatically or manually via the app. Displays the most recent measurement data.
6. Blood Pressure Monitor: Measures current blood pressure. Displays the most recent measurement data (measurement takes approx. 150 seconds).
7. Oxygen Saturation Monitor: Measures blood oxygen saturation levels automatically or manually via the app. Displays the most recent measurement data.
8. Sleep Tracking: Automatically recognizes your sleep status and tracks progress, including deep sleep analysis and light sleep hours.
9. Call Notifications: The bracelet vibrates when the phone rings.
10. Message Notifications: The bracelet vibrates when the phone receives text messages.

Questions and Answers

1. Cannot find device during pairing?
   • Ensure wireless function is on.
   • Ensure the distance between the phone and device is no more than 0.5m.
   • Ensure the device is charged. Contact support if the issue persists after full charging.
2. Cannot connect device with app? Restart the wireless functionality or smartphone to pair the device.
3. App shows no data? Ensure the battery is charged and the wireless function is turned on.
4. Wrong time? If the bracelet battery is low, the time may be incorrect. Recharge the bracelet and reconnect the phone.

Important Health Information

[Warning] If you wear a pacemaker or other implanted electronic device, consult your physician before using the bracelet for heart rate, blood pressure, and oxygen saturation functions. The optical sensor flashes green. If you have epilepsy or are sensitive to flashing lights, consult your doctor before use. The device tracks daily activities via sensors. Data (steps, sleep, distance, heart rate, saturation, blood pressure, calories) is for entertainment and fitness purposes, not medical use. It is not applicable for diagnosis, monitoring, treatment, or prevention of disease or symptoms. Heart rate, blood pressure, and oxygen saturation data are for reference only. Esprinet S.p.A. is not responsible for consequences due to data deviation.

Cleaning

Do not use solvents, corrosive, or gaseous detergents.

Specifications

• Input: DC 5V/1A
• Charging Time: Approx. 2 hours
• Battery Life: 6 days
• Battery Type: Lithium polymer, 50mAh / 3.7V (0.18Wh)
• Software: HS6620
• App: FitPro
• Frequency: 2.408-2.480GHz
• Maximum Radiated Power: <20mW
• Weight: 18.5g
• Bracelet Size: 24 x 1.5 x 1.5 cm

Package Contents

• Fitness tracker
• User manual
• USB charging cable

Disposal Information

[Crossed-out-bin-symbol] This symbol on the equipment or packaging indicates that the product, including its non-removable battery, must be collected separately from other waste at the end of its life for proper treatment and recycling. Safe use is guaranteed by following these instructions. The product requires no technical maintenance; never disassemble it. The internal battery is integrated and non-replaceable. Do not attempt to remove it yourself as it may cause overheating, fire, or injury. Battery removal should only be done by qualified professionals. Users must hand over end-of-life equipment free of charge to designated municipal collection centers for electrical and electronic waste, or return it to the retailer. Proper separate collection aids recycling and prevents negative environmental/health effects. Illegal disposal incurs penalties.

Compliance

This product complies with RoHS directive 2011/65/EU - 2015/863/EU. The product bears the CE mark, complying with EU safety standards. Esprinet S.p.A. declares that the product complies with directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.celly.com/exchange/CELLY-SPA/Dichiarazioni_di_conformita/TRAINERBAND/DOC.pdf