Important Safety Instructions

All operators must read these instructions before use. This manual provides essential safety precautions to reduce the risk of fire, electric shock, and personal injury. Always pay special attention to warnings and cautions.

Intended Use

This machine is designed for felling, bucking, and delimbing trees, and cutting wooden objects within the cutting bar's capabilities. Improper use may lead to hazards and invalidate the warranty.

General Safety Precautions

Always follow basic safety precautions when using electric yard tools. This includes keeping the work area clean, avoiding dangerous conditions like rain or wet locations, keeping bystanders and children away, and using the correct tool for the job. Wear appropriate personal protective equipment, including safety glasses, hearing protection, and gloves.

Chain Saw Use and Care

Proper use and maintenance are crucial for safe operation. Always disconnect the power source before performing any adjustments or maintenance. Keep cutting tools sharp and clean. Avoid forcing the tool and ensure all guards are in place. Be aware of kickback dangers and how to prevent them.

Electrical Safety

Ensure the use of a Ground Fault Circuit Interrupter (GFCI) protected circuit. Use only outdoor-rated extension cords suitable for the tool's power requirements. Never use the tool in wet conditions or with wet hands. Understand the importance of proper grounding and polarized plugs.

Safety Symbols

Familiarize yourself with the various safety symbols and their meanings as depicted in the manual to ensure safe operation.

Know Your Electric Chain Saw

This section details the components of the electric chain saw, including the appliance cord, handles, oil tank, chain brake, and cutting bar. Technical specifications such as rated voltage, motor amperage, and chain speed are also provided.

Unpacking and Assembly

Follow the instructions for unpacking and assembling the chain saw, ensuring all parts are present and correctly installed. Always wear protective gloves during assembly and handle the chain saw with care.

Installing the Guide Bar and Chain

Detailed steps are provided for installing the guide bar and chain, including proper chain tensioning and alignment. Ensure the chain is correctly oriented for optimal performance and safety.

Preparing to Work

Before starting any work, check that all screws are tight, the chain is properly tensioned and sharpened, and all safety devices are functioning correctly. Ensure the chain oil level is adequate.

Adjusting the Chain Tension

Learn how to properly adjust the chain tension for safe and efficient operation. The chain should be snug but rotatable by hand.

Chain Lubricant

Proper lubrication of the chain and bar is essential to prevent damage. Use a good quality bar and chain oil. The chain saw is equipped with an automatic oil pump.

Operation

Follow the steps for starting the machine, including adding bar and chain oil and connecting the power cord. Always hold the chain saw firmly with both hands and engage the safety lock button before squeezing the trigger.

Operating Tips

Adhere to operating tips for safe use, including reading the manual, understanding controls, wearing appropriate clothing, and working in good lighting. Be mindful of environmental considerations and proper disposal of materials.