User Manual for Dewolf models including: VP4XXX, 2A23B-VP4XXX, 2A23BVP4XXX, VP4XXX DBA Protectli, VP4XXX, DBA Protectli, VP4XXX Protectli, Protectli
Dewolf Technologies, Inc (DBA Protectli) VP4XXX 2A23B-VP4XXX 2A23BVP4XXX vp4xxx
User Manual Version 1.0 Published June 2021 Content 1. Introduction................................................................................................................. 1 1.1 Specification .....................................................................................................................2 1.2 Package Contents .........................................................................................................3 1.3 I/O Panel................................................................................................................4 2. Installation................................................................................................................... 4 2.1 Screw Holes ......................................................................................................................5 2.2 Pre-installation Precautions .........................................................................................6 2.3 Installation of Memory Modules..............................................................................6 2.4Onboard Headers and Connectors........................................................................6 Precaution The motherboard is made up of many sophisticated integrated circuits and other components that are easily damaged by static electricity, Please read the manual and prepare the following instructions before installation: Please confirm that the size of the chassis is consistent with the motherboard before installation. Please do not tear up the serial number and agent warranty sticker on the motherboard before installation, otherwise it will affect standard of product warranty. To install or remove the motherboard and other hardware devices, please be sure to turn off the power before, and removal of power cord from outlet. When you install other hardware devices to the motherboard socket, make sure the interface and socket is closely. Take the motherboard, please try your best to avoid touching the metal connection parts to avoid short circuits in the line. Take the motherboard, CPU or when the memory, it is best to wear anti-static bracelet. If no ESD bracelet, make sure your hands dry, and touch the metal to dissipate the static charge. Before the boards are not installed, first placed in anti-static mat or anti-static bags. When you want to remove the motherboard power supply when the plug from the socket, make sure that power supply is turned off. In before power on make sure that the power supply voltage of the voltage value is set in the area of standard values in make sure all hardware devices before turning on the power supply cable and the power cord is correctly connected. Do not let the screw contacts on the motherboard circuit or part to avoid Board damage or failure. Please make sure that no screws or metal in or on the motherboard inside the computer chassis. Do not place the computer in unstable. 1.1Specification Chapter 1: Introduction Model Processor Chipset RAM Display port Expansion port Storage Audio Network I /O VP4XXX Intel core i3 10110U Intel core i5 10210U Intel core i7 10810U Adopt Intel express chipset 2*SODDR4(can up to 64G) Integrated Intel HD Graphic card, Support 1*HDMI,1*DP 1*M.2 , support 4G, 1*M.2 2230 support WiFi 1* M.2 2280 support SATA/NVME N/A 6* Intel I225V 2.5G Lan, support wake on lan 6* RJ-45 1* 12V DC input 1* HDMI,1*DP 3 *USB 3.0, 1*USB2.0, 1*Type C, 1*Micro USB 1*Power switch, 1*SIM Slot 1* Power Led, 1* HDD led Built-in I/O BIOS WDT Power supply Temp Humidity Dimension 1 * FP1 1 * J2 1 * JSATA Port, 1*SATA 2 * SODIMM 1 * CPU_Fan AMI 64M DPI Flash ROM Support hardware reset (256 level0~255 sec) DC-12V -2060 095% relative humidity, non-condensing 144*126.5*46 CM Package Contents N23 Main Host Vesa Bracket Screw Package 1.3 I/O Panel Chapter 2 2.1 screw holes Place screws into the holes to secure the motherboard to the chassis . Place screws into the hold to secure the bottom panel to the chassis . 2.1 Pre-installation precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component . 2. To avoid damaging the motherboard components due to static electricity, Never place your motherboard directly on the carpet or the like . Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components . 3. Hold components by the edges and do not touch the ICs. 4. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component . 2.3Installation Memory Modules Please make sure to disconnect power supply before adding or removing So-DIMMs or the system components. Step1. Unlock a SO-DIMM slot by pressing the retaining clips outward. Step2. Align a SO-DIMM on the slot such that the notch on the SO-DIMM matches the break on the slot 2.4 Onboard headers and Connectors FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Microsoft Word 2016