User Manual for selectronic models including: PC0018 SP Pro Series Grid Power System, PC0018, SP Pro Series Grid Power System, Grid Power System, Power System
Selectronic SP Pro Series 2i 7.5kW 48V multi-mode inverter - AC Solar Warehouse
Warranty Requirements 1. Standard warranty 2. The SP PRO is in its original installation and you meet all the conditions of the Selectronic Power Assist program. Warranty Duration from date of Purchase 5 years 10 years Our goods come with guarantees that cannot be excluded under consumer law within your country. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Failure to adhere to all installation and user conditions as set down in the installation manuals will void your warranty. Any faults or associated faults caused by lightning, water or moisture ingress, vermin infestation, improper voltage, faulty installation, use of the product in a manner for which it is not intended, alterations which affect the reliability or performance of the unit but are not attributable to faulty manufacture, failure to act on service warning from the SP PRO inverter, damage caused by faulty generator sets, or caused by other system components, will not be covered under warranty. The wear of consumable components (cooling fans and power capacitors reaching end of life) is not covered under warranty. The standard warranty for this product is 5 years from date of purchase. For installations in Australia and New Zealand, it is possible to extend the warranty term up to 10 years. To achieve a 10-year warranty plus other additional benefits, please see details on our Selectronic Power Assist program at www.selectronic.com.au/powerassist Selectronic will bear the cost of parts and their factory labour to repair any manufacturing fault found within the terms and period of this warranty. For claim under warranty, faulty product must be returned to Selectronic in Melbourne, Australia. unless special arrangements have been made between Selectronic and the Installer. Selectronic will pay the cost of freight to return the repaired inverter within mainland Australia or New Zealand only. The method of freight will be determined by Selectronic. Selectronic will not be responsible for any misrepresentations or incorrect information conveyed by anyone not directly employed by Selectronic. www.selectronic.com.au/warranty Scan this QR code to visit the website: Warranty conditions apply to inverters purchased on or after 1st July 2021. Warranty conditions remain current until the next revision of this document is published. Proof of purchase is required when making a warranty claim. PC0018 REV 13 004286 01/07/2021Microsoft Word for Microsoft 365