lastem.com
Sensors for Environmental Monitoring - LSI LASTEM
Owner's Manual for LSI models including: BVA320, BVA315, BVA304, BSC015, DEA261, DEA261.1, DEA251, DYA059, TXMRA0031, M-Log Environmental Data Loggers, M-Log, Environmental Data Loggers, Data Loggers, Loggers
M-Log - LSI LASTEM
Index of /solfycta-uploads/PDF/MW9005
File Info : application/pdf, 15 Pages, 724.41KB
DocumentDocumentENVIRONMENTAL DATA LOGGERS
Accessories
LSI LASTEM data loggers share a range of common accessories for their installation, communication and power supply.
Sensors and data logger arms for indoor applications
M-Log used for temporary applications can be mounted on an arm fixed on a tripod, together with sensors.
BVA320 BVA315 BVA304
Sensors and data logger arm. Fixing to BVA304 tripod or to wall
Dimensions
850x610x150 mm
Number of sensors
N.6 using threaded screws + N.1 ring for ESU403.1-EST033 sensors
Weight
0.5 kg
Sensors and N.2 data logger arm. Fixing to BVA304 tripod
Dimensions
400x20x6 mm
Number of sensors
N.22 using threaded screws + support for N.4 ESU403.1-EST033 sensors
Weight
1.6 kg
Three arm tripod
Occupied area size
Max 1100x1100 mm
Maximum height
1600 mm
Weight
1.6 kg
Bag for transportation
Included
Power supplies
When the data logger (see Compatibility) isn't supplied with an ELF box, we recommend having external power supply units.
BSC015
DEA261 DEA261.1
Power supply converter/battery charger for indoor applications.
Voltage
230 V AC -> 9 V DC (1.8 A)
Connection
On data logger power plug
Protection degree
IP54
Compatibility
M-Log (ELO009)
Power supply converter/battery charger for indoor applications to data logger
Voltage
10W-90..264V AC->13.6 V DC (750 mA)
Connection
DEA261: with 2C connector DEA261.1: free wires to data logger terminal board
Protection degree
IP54
Compatibility
DEA261: E-Log DEA261.1: E-Log, Alpha-Log, ALIEM
MW9005-ENG-07-29/11/2024
1
Accessories
DEA251 DYA059
Power supply converter/battery charger for outdoor applications. N.2 outputs
Voltage
85...264 V AC -> 13.8 V DC
Power
30 W
Max output current
2 A
Connection to sensors or data logger On free terminals board
Protection degree
IP65
Protections
·
Short Circuit
·
Overvoltage
·
Overcurrent
Operative temperature and humidity -30...+70 °C ; 20...90 %
Compatibility
E-Log, Alpha-Log, ALIEM
Bracket for DEA251 on poles of 45...65 mm diameter
RS485 modules
Required to connect RS485 sensors (up to 3 signals) to Alpha-Log's RS485 port.
TXMRA0031 Three signal RS485 active star wiring hub. The unit has three independent RS485 input and output channels, each with their own driver, which can transmit sig-
nals across 1200 m of cable on each channel.
Input
N.3 RS485 Channel: Data+, Data-
Output
N.1 RS485 Channel: Data+, Data-
Speed
300...115200 bps
ESD protection
Yes
Power supply
10...40 V DC (not insulated)
Power consumption
2.16 W
EDTUA2130 Three signal RS485 active star wiring hub.
Input
N.3 RS485 Channel: Data+, Data-
Output
N.1 RS485 Channel: Data+, Data-
Maximum current
16 A
Voltage
450 V DC
Protection degree
IP68
Radio signals receiver
EXP301
DWA601A DYA056
Radio signal receiver from radio sensors or from EXP820 RS-232
Output compatible with data loggers (M/E-Log)
·
Maximum number of receivable sensors 200
·
Battery NiCd 9 V
·
Power supply 12 V DC
·
Antenna included
Serial cable L=10 m for connection of EXP301 to E/M-Log data logger RS-232 port
Support for EXP301 to pole D=45...65mm
2 2
Accessories
Radio signals repeaters
EZB322
Zig-Bee radio signals repeater
Mounting
Universal AC socket
Power supply
85...265 V AC, Universal AC socket
Protection degree
IP52
Environmental limits
0...70 °C
Compatibility
E-Log radio (ELO3515)
EXP401
IP64 radio signals repeater "Store and forward". Power supply: 12 V DC
DEA260.2 Power supply 230->13,8V 0,6A for EXP401 repeater
EXP402
IP65 radio signals repeater "Store and forward". Power supply: 12 V DC
DYA056
Support for EXP401-402 to pole D=45...65mm
DWA505A Cable for EXP402, L=5 m
DWA510A Cable for EXP402, L=10 m
Batteries
External batteries are required for E-Log, Alpha-Log operation when not powered from the mains and or to increase the M-Log battery life. Batteries are usually mounted inside ELF boxes and connected to the data logger using the terminal power supply input.
MG0558.R
12 V Pb 18 Ah battery Type Dimensions and weight Operating temperature
MG0560.R
12 V Pb 40 Ah battery Type Dimensions and weight Operating temperature
MG0552.R
12 V Pb 2.3 Ah battery Type Dimensions and weight Operating temperature
MG0564.R
12 V Pb 2.3 Ah battery Type Dimensions and weight Operating temperature
3 3
Rechargeable Sealed Lead-Acid 181x76x167 mm; 6 kg · Charge -15...40 °C · Discharge -15...50 °C · Storage -15...40 °C
Rechargeable Sealed Lead-Acid 151x65x94 mm; 13.5 kg · Charge -15...40 °C · Discharge -15...50 °C · Storage -15...40 °C
Rechargeable Sealed Lead-Acid 178x34x67 mm; 1.05 kg · Charge -15...40 °C · Discharge -15...50 °C · Storage -15...40 °C
Rechargeable Sealed Lead-Acid 330x171x214 mm; 30 kg · Charge -15...40 °C · Discharge -15...50 °C · Storage -15...40 °C
Accessories
Mini-DIN Adapters
To connect sensors with free-wires to data loggers with min-DIN input (ELO009), these adapters are needed:
CCDCA0010 CCDCA0020
Terminal board/mini-DIN adapter+cable
N. contacts
CCDCA0010: 4 + shield (for digital sensor)
CCDCA0020: 7 + shield (for analogic sensor)
Cable
L=2 m
RS232 cables, USB interface
To connect data loggers to PC via RS232 or USB cable. In each pack of M-Log and E-Log , the ELA105.R serial cable and the DEB518.R USB adapter are included.
ELA105.R DEB518.R
L= 1,8 m serial cable Included in each M-Log and E-Log pack
RS232->USB converter Included in each M-Log and E-Log pack
RS485 converters, TCP/IP
To obtain a long cable (more than 1 Km) beetween the data logger and the PC. It is possible to use a RS232-485 converter. A TCP/IP connection to the Ethernet web, allows to send data to the PC within a network also connected via the Internet. These devices can be mounted inside ELF boxes.
DEA504.1
MN1510. 20R MN1510. 25R MN1510. 50R MN1510. 200R
RS232<->RS485/422 422 converter with electrical protections
Insulation (optically)
Optically insulated (2000 V)
Insulation (surge protection)
From electrostatic discharge (25KV ESD)
Bit rate
300 bps...1 M bps
RS232 connector
DB9 female
RS422/485 connector
DB9 male, 5-pin terminal
Power supply
9...48 V DC (power supply included)
Fixing
DIN bar
Cable
DB9M/DB9F (included)
Cable LAN Category 5 to connect DEA504 converters. L= 20 m
Cable LAN Category 5 to connect DEA504 converters. L= 25 m
Cable LAN Category 5 to connect DEA504 converters. L= 50 m
Cable LAN Category 5 to connect DEA504 converters. L= 200 m
4 4
Accessories
DEA553 DEA509
Industrial secure serial port to Ethernet device server with 1xRS-232/422/485 and 2x10/100Base-T(X)
Input
RS232/422/485 (DB9)
Output
Ethernet 10/100Base-T(x) Auto MDI/ MDIX
Protocols
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP, V1/V2c, HTTPS, SMTP
Power supply
12...48 V DC
Consumption
1.44 W
Operative Temperature
-40...70 °C
Fixing
DIN bar
Protection degree
IP30
Weight
0,227 kg
Gateway Modbus-TCP. Modbus-RTU in Modbus TCP converter
Input
RS232/422/485 (DB9)
Output
Ethernet 10/100 M
ESD protection
15 KV for serial port
Magnetic protections
1.5 KV for Ethernet port
Power supply
12...48 V DC
Consumption
200 mA @ 12V DC, 60 mA@ 48V DC
Operative Temperature
0...60 °C
Fixing
DIN bar
Protection degree
IP30
Weight
0.34 kg
Converter RS232/RS485 - > optical fibre
TXMPA1151 Serial converter RS232 / optical fibre mono modal
TXMPA1251 Serial converter R485 / optical fibre mono modal
Dropping resistors
EDECA1001 Five 50 ohm-resistors kit (1/8 W, 0.1%, 25 ppm) to convert 4...20 mA -> 200...1000 mV
5 5
Accessories
Modem GPRS, 3G, 4G. UMTS Router. Wi-Fi Module
For remote connections, 3G-4G modems are available. Via modem, is possible to send ("push mode") data to FTP server or, using the program P1-CommNET, to LSI LASTEM GIDAS database. These devices can be mounted inside ELF boxes.
DEA718.3 Modem GPRS - GSM-850 / EGSM-900 / DCS-1800 / PCS-1900 MHz Quad-Band. GPRS class 10
Operative temperature
-20...70 °C
Power supply
9...24 V DC from data logger
Consumption
Sleep: 30 mA, during com. 110 mA
Weight
0.2 kg
Compatibility
E-Log
ELA110
Connection cable between E-Log and DEA718.3 modem
MC4101
Fixing bar for DEA718.3 in ELF boxes
DEA609
Modem adapter DEA718.3 / external antenna DEA611
TXCMA2200 Modem 4G/LTE/HSPA/WCDMA/GPRS Quadband/class 10/class12
LTE FDD
Download speed 100Mbps Upload speed 50Mbps
Frequency band (MHz)
850/900/1800/1900MHz
DEA611
Input
2 x RS232, 1 x RS485
Cellular Antenna
Standard SMA female interface, 50 ohm, lighting protection(optional)
SMS
Yes
Connection cable to data logger
Included
Operative Temperature
-35...75 °C
Power supply
5...36 V DC from data logger
Consumption @12 V
Sleep: 3 mA. Standby: 40-50 mA. Communication mode: 75-95 mA
Casing
Iron, IP30
Mounting
DIN bar
Weight
0.205 kg
Compatibility
Alpha-Log
External antenna for 3G, LTE modem TXCMA2200 double gain GPRS/UMTS/LTE
Frequencies
GSM/GPRS/EDGE: 850 / 900 / 1800 / 1900 MHz. UMTS/WCDMA: 2100 MHz LTE: 700 / 800 / 1800 / 2600 MHz
Free license ISM band
Field 869 MHz, UHF Frequency
Irradiation
Omnidirectional
Gain
2 dBi
Power (max)
100 W
Impedance
50 Ohm
Cable
L=5 m
Fixing accessory
Included
Compatibility
TXCMA2200, DEA718.3 (with DEA609)
6 6
Accessories
TXMPA3770 High-Gain 2.4 GHz Wi-Fi USB adapter
Wireless data rate
Up to 150 Mbps
Port
USB 2.0
Security
WEP, WPA, WPA2, WPA-PSK/WPA2-PSY Encryptions
Standard
IEE802.11
Environmental limits
0...40 °C (Not condensing)
Weight / Dimensions
0.032 kg / 93.5 x 26 x 11 mm
TXCRB2200 TXCRB2210 TXCRB2200.D
Dual SIM Industrial 4G/LTE Wi-Fi router, 3 models depending on number of LAN ports (e.g. data logger and camera with ethernet) and region covered
Mobile
4G (LTE), 3G
Max data rate
LTE: 150 Mbps. 3G: 42 Mbps
WiFi
WPA2-PSK, WPA-PSK, WEP, MAC Filter
Ethernet WAN port
N.1 (config. to LAN) 10/100 Mbps
Ethernet LAN port ()10/100 Mbps
· N.1 (TXCRB2200, TXCRB2200.1) · N.4 (TXCRB2210)
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)
Region (operator)
· TXCRB2200, TXCRB2210: Global
· TXCRB2200.D: Europe, The Middle East, Africa
Frequencies
· TXCRB2200, TXCRB2210: 4G (LTEFDD): B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28. 4G (LTE-TDD): B38, B39, B40, B41. 3G: B1, B2, B4, B5, B6, B8, B19. 2G: B2, B3, B5, B8
· TXCRB2200.1: 4G (LTE-FDD): B1, B3, B5, B7, B8, B20. 4G (LTE-FDD): B1, B3, B7, B8, B20. 3G: B1, B5, B8. 2G: B3, B8
Power supply
9...30 V DC (<5W)
Operating temperature
-40...75 °C
Weigth
0.125 kg
Compatibility
Alpha-Log
TXANA3033 Network directional antenna 28dBi
Weight / Dimensions
550 g / 110 x 55 mm
Cable
H=3 m
Compatibility
TXCRB2200-00.1, TXCRB2210
7 7
Accessories
TXRMA4640 Satellite Modem (GPS+GLONASS L1 freq.) Thuraya M2M
Narrowband IP
UDP and TCP/IP
Frequency band Typical latency
TX 1626.5 to 1675.0 MHz R X 1518.0 to 1559.0 MHz
< 2 s 100 bytes
Power
10...32 V DC
Wi-Fi
IEEE 802.11 B/G, 2.4 GHz
Weight / Size (L x W x H)
< 900 g / 170 x 130 x 42 mm
Operative temperature
-40°C...+71 °C
TXCRA1300
Support to pole
DYA062
Industrial router 3G/LTE dual SIM, removable magnetic antenna. Input RS232/485 for communication of independent devices
Max data rate
3G: 14 Mbps
SMS
Sì
Ethernet LAN port
N.1 LAN port, 10/100BT
Network protocols
Power supply Operating temperature
PPP, PPPoE,TCP, UDP,DHCP, ICMP,NAT, DMZ, RIPv1/v2,OSPF,DDNS, VRRP, HT TP,HTTPs,DNS, ARP,QoS,SNTP, Telnet
9...26 V DC (<5W)
-40...75 °C
Compatibility
M-Log, E-Log
Communication ports
RS232, RS485
TXRGA2100
Antenna Router/repeater/client Wi-Fi industrial Wi-Fi Sensitivity Ethernet LAN Port
3G/2G Omnidiretional Quad-Band included + second connector
N.1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 2.4 / 5 GHz Receiver: -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n N.1 LAN port Gigabit 10/100/1000 Base TX auto-sensing, auto MDI/MDIX
Power Supply
9...48 V DC
Operative temperature
-20...60 °C
TXANA1125
Compatibilità
Alpha-Log
Flat antennas
N.2 3dBi@2,4 GHz/4dBi@5GHz
Mounting on DIN bar
With kit MAOFA1001
Omnidirectional antenna SISO "stick" 2 dB
Bandwidth
Broad 698..3800 MHz
Gain
2 dB
Length
16 cm
Cable
3 m with SMA connector
Mounting
Pole/wall mounting kit included
8 8
Accessories
TXANA1125 .1
Omnidirectional antenna SISO "stick" 6 dB
Bandwidth
2.4 GHz
Gain
6 dB
Length
25 cm
Cable
2 m with N-f/RSMA connector
Mounting
Pole/wall mounting plate included
Long distance VHF radio
VHF radios allow easy, cost-free connections, several kilometers away. Via radio it is possible to connect several data loggers with MASTER/SLAVE logic or to connect a data logger to a PC. These devices can be mounted inside ELF boxes.
TXRMA2132 160 MHz radio modem for PC or data logger connection, VHF-500 mW erp;
includes 3 elements Yagi antenna. Transmitting part of the system, connected with ELA110+ELA105 to data logger, included in M-Log and E-Log.
Operating band
169.400...169.475 MHz
Output power
500 mW ERP
Number of channels
12.5 25 50 kHz
Radio data rate (Tx/Rx)
4.800 bps@12.5kHz, 9600 bps@25kHz, 19200 bps @50 kHz
Power supply
9...32 V DC
Consumption
140 mA (Rx)
Operative temperature
-30...70 °C
Antenna
Included. N.3 elements antenna Yagi. L=10 m cable
Line-of-sight
7...10 km
Weight
0.33 kg without antenna
Communication port
RS232, RS485
TXRMA2131 160 MHz radio modem for PC or data logger connection, VHF-200 mW erp; includes dipole antenna. Receiving part connected with ELA105.
Main features
See TXCMA2132
Antenna
Included Dipole antenna L=5 m cable
ELA110
Connection cable radio/data logger
ELA105
Serial cable L=1.8 m. To be quoted to connect TXMA2131 to PC. Included in each package of M-Log and E-Log for data logger connection.
DEA260.1 230 V AC/12V DC power supply for radio TXRMA2131 PC side
DEA605 DEA606.R
Serial adapter null-modem 9M/9F Serial adapter null-modem 9M/9M
9 9
Accessories
Solar panel
For applications where mains power is not available or where a double power supply is required, the data logger can be powered by a photovoltaic panel. In these cases it is advisable to place the data logger inside an ELF345-345.1 box that includes DYA115 regulator that doesn't have to be supplied separately. When a solar panel supply is present, an external battery must be housed in the ELF345 box model MG0558.R (18 Ah) or MG0560.R (44 Ah), chosen according to the autonomy required and the availability of hours of sunshine. The solar panel is mounted on a pole through a tiltable support (DYA064).
DYA109 DYA064
80 Wp solar panel
Power
80 Wp
Operative voltage (VMP)
21.57 V
VOC voltage
25.45 V
Dimensions
815x535 mm
Weight
4.5 kg
Tecnology
Monocristalline
Frame material
Aluminium
Cable
L=5 m
Regulator (DYA115)
· Battery Voltage: 12/24V · Charge/Discharge Current: 10 A · Battery type: Lead/Acid · Float voltage: 13.7 V · Auto Power Off Voltage: 10.7 V · Auto Reconnect Voltage: 12.6 V · Self-consumption: < 10 mA · USB Output: 5 V /1.2 A Max · Operating temperature: -35...60 °C · included inside ELF345-345.1 boxes · Inside Alpha-Log
Tiltable support for solar panel fixing to poles of diam. 45...65 mm Weigth: 1.15 kg
Shockproof case to contain data loggers in portable applications
For portable applications, data loggers can be mounted inside IP66 cases to be protected against shocks, water, dust and atmospheric agents. Inside the case can be also be housed the communication device.
ELF432
Portable IP66 shockproof case. Complete with rechargeable battery (18 Ah) and power supply/battery charger (230 V AC/13,8 V DC)
Dimensions Weight Compatibility
520 x 430 x 210 mm 12 kg E-Log, Alpha-Log
1100
Accessories
IP66 boxes for data logger fix installations
For fix outdoor installations, data loggers can be mounted inside IP66 enclosures that give protection against shocks, water, dust and atmospheric agents. Each box houses the relative power supply system as well as specific accessories, and has the predisposition to house the communication device that can be chosen from the list of Accessories. Each box can be equipped with a support for pole or wall fixing.
ELF345 ELF345.1 ELF345.3 ELK340
IP66 box. Complete with regulator for photovoltaic panels. Compatibility with 18 or 44 Ah batteries
Power supply
From solar panel using regulator
Solar panel regulator
Included
Dimensions
H 502 x L 406 x D 230 mm
Weight
7 kg (battery excluded)
Material
Fiberglass
Compatible batteries (not included)
MG0558.R (18 Ah), MG0560.R (44 Ah)
Compatibility
E-Log, Alpha-Log
IP66 box. Complete with regulator for photovoltaic panels and 85-264 V AC battery charger power supply. Compatibility with 18 or 44 Ah batteries.
Solar panel regulator Power supply
Dimensions
Included
85-264 V AC-> 13.8 V DC Thermal magnetic switch. Power: 50W
H 502 x L 406 x D 230 mm
Weight
17.5kg (battery excluded)
Material
Fiberglass
Compatibility
E-Log, Alpha-Log
IP66 box for Alpha-Log connection to photovoltaic panels. Compatibility with 18 or 44 Ah batteries
Power supply
From solar panel using regulator inside Alpha-Log
Dimensions
H 502 x L 406 x D 230 mm
Weight
7 kg (battery excluded)
Material
Fiberglass
Compatible batteries (not included)
MG0558.R (18 Ah), MG0560.R (44 Ah)
Compatibility
Alpha-Log
IP66 box. Complete with 85-240 V AC-> 13.8 V DC power supply (30 W) and 2 Ah battery.
Power supply
85-240 V AC-> 13.8 V DC Thermal magnetic switch. Power: 30W
Dimensions
H 445 mm × L 300 mm P 200 mm
Weight
5 kg
Material
Polyester
Battery
2 Ah rechargeable, included
Compatibility
E-Log, Alpha-Log, ALIEM
1111
Accessories
ELF340 ELF340.10
IP66 box. Complete with 85-264 Vca-> 13.8 V DC power supply (50 W) and 2 Ah battery. Compatibility with 18 or 44 Ah batteries
Power supply
85-264 V AC-> 13.8 V DC Thermal magnetic switch. Power: 50W
Dimensions
H 502 x L 406 x D 230 mm
Weight
7 Kg
Material
Fiberglass
Battery
2 Ah rechargeable, included
Compatibility
E-Log, Alpha-Log
IP66 box. Complete with 85-264 V AC-> 13.8 V DC power supply and 2 Ah battery and 230/24V transformer. With provision for installation of Relays for actuations (MG3023.R type) and IN-OUT terminal for analogue signals
Power supply
85-264 V AC-> 13.8 V DC 30W 230V AC/24V AC 40VA Thermal magnetic
Provision for Relays (not included)
Up to N.5 Relays (MG3023.R type)
IN-OUT signals terminal board
Terminal for analog signals input N.7 IN signals N.7 OUT signals
ELF340.8
IP66 box. Complete with 85-264 V AC-> 13.8 V DC power supply and terminal board for up to N.3 RS485 signals. Compatibility with 2, 18 or 40 Ah batteries. Used to receive digital signals
Power supply
85-264 V AC-> 13.8 V DC 50W Thermal magnetic
Dimensions
H 502 x L 406 x D 230 mm
Weight
7,5 kg
Compatibility
E-Log, Alpha-Log
ELF344
IP66 box. Complete with 85-264 V AC-> 13.8 V DC power supply, 2Ah battery and 230 V AC/24 V AC transformer for heated sensors
Power supply
85-264 V AC-> 13,8 V DC 2A 30W
Transformer
230V AC/24V AC 4.1 A 100VA
Dimensions
H 502 x L 406 x D 230 mm
Weight
7.5 kg
Battery
2Ah rechargeable, included
Compatibility
E-Log, Alpha-Log
1122
Accessories
ELK347
IP66 box. Complete with 85-240 V AC-> 13,8 V DC power supply, 2Ah battery and 85-260 V AC -> 24 V DC transformer for ALL IN ONE heated version sensors
Power supply
85-240 V AC -> 13,8 V DC 30W
Transformer
85-260 V AC -> 24 V DC 150 W
Dimensions
H 445 mm × L 300 mm P 200 mm
Weight
5,5 kg
Battery
2 Ah rechargeable, included
Compatibility
Alpha-Log
DYA074
Support for ELF enclosures H 502 x L 406 x P160 mm to pole Ø 45...65 mm
DYA072
Support for ELF enclosures H 502 x L 406 x P 160 mm to wall
DYA148
Support for two ELF enclosures H 502 x L 406 x P160 mm to pole Ø 45...65 mm
MAPFA2000 Support for ELK enclosures H 445 × L 300 P 200 mm to pole Ø 45...65 mm
DYA081
Door lock for ELFxxx boxes
MAPSA1201 Protection tile for ELFxxx boxes. Dimensions: 500 x 400 x 230 mm
SVSKA1001 Fixing kit for Alpha-Log in ELFxxx boxes when E-Log is already installed
MAGFA1001 Cable gland for ELF340-340.7-345-345.1-345.3-344-347 box and RJ45 / Ethernet cable
Carrying cases
To transport data loggers and their accessories, LSI LASTEM supplies the following cases.
BWA314 BWA319
Shockproof case, watertight (52x43x21 cm) for data loggers and probes Weight:3.9 kg
Shockproof case with wheels, watertight (68x53x28 cm) for data loggers and probes Weight: 7 kg
BWA047
Soft bag for data logger transport Weight: 0.8 kg
BWA048
Bag to transport BVA304 tripod and stands Weight: 0.4 kg
1133
Accessories
Relay
Data logger versions with terminal inputs can switch external devices on/off via their digital outputs. The voltage available at the outputs corresponds to the supply voltage of the data logger (normally 12 V DC). In order to convert the output into a clean On/Off contact, LSI LASTEM provides relay suitable for mounting inside ELF boxes.
MG3023.R MG3024.R
Relay for On-Off actuation of the digital output. DPDT type.
Maximum switching voltage contact Minimum switching voltage contact Min. switching current contact Limiting continuous current contact Typical input current coil Coil voltage Protective circuit Operating voltage display
250 V AC/DC 5 V (at 10 mA) 10 mA (At 5 V) 8 A 33 mA 12 V DC Damping diode Yellow LED
Maximum switching voltage contact Minimum switching voltage contact Min. switching current contact Limiting continuous current contact Typical input current coil Coil voltage Protective circuit Operating voltage display
400 V AC/DC 12 V (at 10 mA) 10 mA (At 12 V) 12 A 62.5 mA 12 V DC Damping diode Yellow LED
USB Drive
XLA010
USB Pen drive 3.0 Industrial Grade, Flash type MLC
Capacity
8 Gb
Power consumption
0.7 W
Operative temperature
-40...85 °C
Vibration
20 G @7...2000 Hz
Shock
1500 G @ 0.5 ms
MTBF
3 million hours
Data logger protections
EDEPA1100 Protection unit (SPD) for power line, single phase 230 V.
Mounting
DIN bar
Compatibility
Alpha-Log, E-Log
EDEPA1101 Protection unit (SPD) for RS-485 communication line.
Mounting
DIN bar
Compatibility
Alpha-Log, E-Log
EDEPA1102 Protection unit (SPD) for Ethernet communication line.
Mounting
DIN bar
Compatibility
Alpha-Log, G.Re.T.A.
1144
Accessories
Optical/acoustic signallers
SDMSA0001 SDMSA0002
Optical/acoustic signaller for indoor use
Lens colour
Red
Power supply
5...30 V DC
Protection grade
IP23
Operative temperature
-20...60 °C
Optical/acoustic signaller for outdoor use with 8 SMT LED
Lens colour
Red
Power supply
10..17 V AC/DC
Protection grade
IP65
Operative temperature
-20...55 °C
Graphic displays
SDGDA0001 Graphic display with touch screen and graphic interface for local management (configuration, diagnostic, data download, etc) of the datalogger
Memory dimension
6 GB
Storage capacity
128 GB
Display
8'' touch screen
Ports
USB-C
Connectivity
Wi-Fi
Protection grade
IP68
Dimensions / Weight
126,8 x 213,8 x 10,1 mm / 0,433 kg
Operative temperature
-40...60 °C
Data logger compatibility
Alpha-Log
LSI LASTEM Srl Via Ex SP. 161 Dosso, 9 20049 Settala (MI) Italy
Tel. +39 02 954141 Fax +39 02 95770594 Email info@lsi-lastem.com www.lsi-lastem.com
1155