LiftMaster CSW200UL High-Traffic Commercial Swing Gate Operator
For the most demanding high-traffic swing gate environments.
Product Highlights
- Motor: Continuous duty, high-temperature motor.
- Reliability: Commercial-grade, heavy-duty operation with worm gear reduction for unparalleled reliability.
- Surge Suppression: Industrial-grade protection against surges and lightning up to 15.2 m (50 ft).
- Warranty: 5 years for commercial use, 7 years for residential use.
- Intelligence: myQ® technology for secure remote control and monitoring from anywhere.
- Wireless Communication: Synchronizes dual gates, eliminating costly trenching. Provides synchronized closing for simultaneous gate closure.
- Safety & Security:
- SECURITY+ 2.0® provides access to facilities with its proprietary, encrypted radio technology.
- Emergency Release: Easy-to-use release handle allows manual gate operation and maintains limit position once re-engaged.
- Inherent Reversal Sensing: Detects obstructions and reverses the gate during closing or stops/reverses during opening.
- Quick Close and Anti-Tailgate features rapidly secure the property, preventing unauthorized access.
- UL® Certified gate operators and entrapment protection monitoring devices.
Included Accessories
- Photoelectric Sensor: Retro-reflective monitored sensor with a heater and wider beam for alignment. Max range: 15.2 m (50 ft).
Safety Accessories
- Through-Beam Photoelectric Sensors: Monitored sensors with a wider beam and heater for high performance in most environments. Max range: 27.4 m (90 ft).
- Wireless Monitored Edge Kit: Provides a low-energy Bluetooth® connection between the monitored edge and the LiftMaster gate operator. Max range: 39.6 m (130 ft).
- Monitored Obstruction Sensing Edges: Full line of low-profile, high-profile, and wrap-around edges that detect obstructions.
Total Solution Accessories
- Connected Access Portal, High Capacity: Cloud-based access control for residential communities.
- Commercial Wireless Keypad: Offers constant pressure override for gate operator control if safety devices fail but are obstruction-free. Maintain Open/Continuous modes are enabled with gate operator firmware 4.2 or higher.
- Connectable Vehicle Loop Detector: Prevents the gate from closing on a vehicle in the path; energy saving for maximum cycle count with battery backup.
Master Engineering
Mechanical
- Motor: Continuous duty motor qualified for high cycle count and high-temperature applications (available in 1/2 and 1 HP).
- Worm Gear Reduction: Two commercial-grade, oil-bath gearboxes providing a 900:1 worm gear reduction.
Power
- 115V Single Phase
- Accessory Power: 24 VDC 500 mA output.
- Optional Kit (3PHCONV) to convert 208/240/460/575 VAC input voltage to 115 VAC output voltage.
Commercial Grade Design
- Chassis: Constructed of 0.64 cm (1/4 in) gold-zinc plated steel to prevent rust.
- Cover: Two-piece, high-density polyethylene cover, resistant to UV rays (1/2 HP CSW200501UL).
- UL® Usage Classification: I, II, III, and IV.
- Operator Weight: 79.3 kg (175 lb).
Standard Features
- Pre-Arrival Warning Alarm: Activates an on-board alarm 3 seconds prior to gate movement.
- Bi-Part Delay: Monitors and adjusts the speed and position of each leaf to ensure the primary gate closes last.
- Mechanical Limit System: Maintains precise gate position throughout the travel, even after using the manual release.
- Monitored Safety Inputs: 3 main board, 3 expansion board inputs.
- Built-in Radio Receiver: SECURITY+ 2.0® - Up to 50 remotes (unlimited with 811LMX/813LMX).
- LED Diagnostic Display: Simplifies installation and troubleshooting.
- Programmable Auxiliary Relays: Makes adding additional features easy.
Specifications
1/2 HP CSW200501UL Capacity
- 2.4 m (8 ft) / 725.75 kg (1,600 lb)
- 3.7 m (12 ft) / 544.3 kg (1,200 lb)
- 4.8 m (16 ft) / 363 kg (800 lb)
1 HP CSW200101UL Capacity
- 3.7 m (12 ft) / 907.2 kg (2,000 lb)
- 4.8 m (16 ft) / 725.75 kg (1,600 lb)
- 5.5 m (18 ft) / 635 kg (1,400 lb)
- 6.7 m (22 ft) / 453.6 kg (1,000 lb)
Temperature Specifications
- Without Heater: -20 °C (-4 °F) to 60 °C (140 °F)
- With Optional Heater (HTRNB): -40 °C (-40 °F) to 60 °C (140 °F)
Gate Travel Speed
Opens 90° in 13 to 15 seconds.
Support
For support tools and training videos, visit LiftMasterTraining.com.
For more information on gate operators, visit LiftMaster.com/UL325Gates.
To find the right perimeter access solution for you, visit LiftMaster.com/Solution-Generator.
Sales Support: 800.282.6225
Technical Support Center: 800.528.2806
To place an order: 800.323.2276
