Godox 705-MAGYCX-03 2.4GHz Dual-Channel Wireless Microphone System Instruction Manual

Instruction Manual for Godox models including: 705-MAGYCX-03, 705-MAGYCX-03 2.4GHz Dual-Channel Wireless Microphone System, 705-MAGYCX-03, 2.4GHz Dual-Channel Wireless Microphone System, Dual-Channel Wireless Microphone System, Wireless Microphone System, Microphone System, System

Magic XT1

Godox

Magic XT1

File Info : application/pdf, 35 Pages, 2.41MB

1186249

QC PASS

Godox Audio Wechat Official Account

Overseas Official Accounts & Updates

2 0755-296093208062 0755-25723423 godox@godox. com
GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com
www.godox.com Made in China | 705-MAGYCX-03

2.4GHz 2.4GHz Dual-Channel Wireless Microphone System
Instruction Manual

2.4GHz Magic XT1 2.4G ,

2.4GHz 200 / /

50
01

1 2
1 4 3 2
8 11 7 6 5

4 3

2. / /

1. 2. 3. 3.5mm 4. 3.5mm 5. 6. 7. USB-C 8. 9. 10. 11. 9
10
02

1 2 3 45

9 8

1. 2. 3. 4. 5. 6. 7. A/B 8. A/B 9. A/B

x 2

x 1

3.5mm TRS TRS × 1

3.5mm TRS Type-C GAC-IC9 × 1

USB-A USB-C × 1

x 1

× 2

× 2 × 4

× 1

1. / / 3 / 3S
2. 10s

4. 6

5.
0.25s/ 0.25s 0.5s/ 0.5s 0.5s/ 0.5s 1s/ 1s

10%

1. 3
04

2. /
2.1 < > / < >
2.2 < > / / < >
2.3 < > /
2.4 < > / AB A/B 2s A 2s B /
05

2.5 < >
/ / / -6dB
2.6 < >

2.7 < >
A B < >

2.8 < >
2.8.1 < > / (0%-100%)

2.8.2 < > / 5
2.8.3 < > logo /
2.8.4 < > / / 3 " "
07

2.8.5 < > / TX
4 2.8.6 < > /
3. USB-C

1.
08

2. 3.5mm TRS TRS 3.5mm 3.5mm
3. 3.5mm TRS Type-C 3.5mm USB-C
09

4. USB-A USB-C USB-C Magic XT1
10

SPL /

Magic XT1 2.4GHz 20Hz-20KHz 115dB 48KHz/24Bit 70dB 200 -10 ~+50 TX 5V 80mA RX 5V 80mA(*2) RX USB-C 5V 550mA TX3.8V, 80mAh, 0.304Wh RX3.8V, 680mAh, 2.58Wh TX 8 RX 16 TX 2 RX 2.5 TX16.7mmX8.9mmX6.3mm RX24mmX24mmX17.4mm TX8g RX50g

Foreword
Thank you for purchasing! Based on the principle of 2.4GHz wireless transmission, Magic XT1 is an innovative and revolutionary microphone system with great strengths and competences. All those characteristics such as compact and portable, long battery life, receiver workable as storage & charging case for transmitters, buttons together with colorful touching screen operation, denoise and lowcut functions, make it suitable for live streaming, outdoor shooting, interview, short video recording, etc. Please read this manual carefully before using to make sure the correct operation and exert the optimum function.
Main Feature
Globally universal 2.4GHz wireless transmission technology. The maximum wireless transmission distance up to 200m (sight distance). Clear and stable sound quality with denoise function. Output volume adjustment and silent function available. Mono/Stereo/Safety mode freely switchable. Lowcut function effectively filters noise . Buttons and colorful touching screen operation. Receiver can store and charge two transmitters.
Warning
This product is high-precision instrument, please avoid falling, collision or pounding. Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center. Always keep this product dry. Do not use in rain or damp conditions. Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty.
13

Keep out of reach of children. Do not use in flammable and explosive environments. Pay attention to the relevant warning signs. Do not leave or store the product if the ambient temperature reads over 50 . Please read carefully and follow the warnings or instructions provided by the manufacturer.
14

Structure of Product
Transmitter

Receiver
1 4 3 2

8
11 7 6 5

1. Mic 2. Power Switch/Denoise/Pair Button 3. Indicator 5 4. Charging Points 5. Magnetic Back Button
1. Display 2. Power Switch Button 3. 3.5mm Audio Output Port 4. 3.5mm Earphone Monitoring Port 5. Down Button 6. Up Button 7. USB-C Port 8. Back Clip 9. Charging Points 10. Detaching Button 11. Charging Slot for Transmitter
9 10
15

Display

1 2 3 45

9 8
What's in the Box

1. Sound Track Icon 2. Screen Lock Icon 3. Mute Icon 4. Lowcut Icon 5. Denoise Icon 6. Receiver Battery Level Icon 7. A/B Transmitter Signal Icon 8. A/B Transmitter Battery Level Icon 9. A/B Transmitter Volume Icon

Transmitter × 2

Receiver × 1

3.5mm TRS-TRS 3.5mm TRS to USB Type-C USB-A to USB-C Connect Cable × 1 Adapter Cable GAC-IC9 × 1 Data Cable × 1

Cold Shoe Base × 1

Furry Windscreen × 2

Magnetic Back Clip × 2

Magnetic Back Button × 4

Storage Box × 1

Instruction Manual × 1 Instruction Card × 1

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.
16

Using Instructions

Transmitter
1. Power Switch/Denoise/Pair Button Press and hold the button for 3s to turn on or off the transmitter, short press it to turn on or off the denoise mode. Take the transmitter out of the charging slot of receiver, it will be automatically turned on. Put the transmitter into the charging slot of receiver, it will be automatically turned off when fully charged.
Note: Please remove the protective film from bottom of the transmitter before use, then press and hold the button for 3s to turn it on.
2. Pairing Short press the button twice to enter pairing mode, it will exit the pairing state immediately after successfully paired, and exit in 10s after unpaired.

3. Charging
The transmitter can be charged through its charging points after being put into the charging slot of receiver.

4. Factory Reset

Press and hold the button for 6s then let go, the transmitter will start factory resetting.

5. Indicator Instruction
Status Constant on green Flash green quickly every 0.25s Breathe green every 0.5s Constant on red Constant on orange Flash red every 0.5s Breathe blue every second Flash white

Meaning Paired Pairing Unpaired in power on status Mute mode Denoise mode Battery level below 10% Charging Factory resetting 17

Receiver
1. Power Switch Long press the power switch button for 3s to turn on or off the receiver.
2. Menu Function In the main interface, short press the power switch button or slide the screen downward to enter the first-level menu interface, short press the up/down button or slide the screen leftward/rightward to switch menu options, then short press the power switch button to enter the second-level menu, or directly click the corresponding icon to operate. Slide the screen upward can return to the previous menu.
2.1 DNR< >
In the DNR interface, short press the up/down button to select on or off, then short press the power switch button to confirm, or directly click the screen to select and confirm. The denoise icon < > will be on the main interface in denoise mode.
2.2 Lowcut< > In the lowcut interface, short press the up/down button to select on or off, then short press the power switch button to confirm, or directly click the screen to select and confirm. Press the up/ down button at the same time can quickly enter the lowcut interface.The lowcut icon < > will be on the main interface in lowcut mode.
18

2.3 Mute< >
In the mute interface, short press the up/down button to select on or off, then short press the power switch button to confirm, or directly click the screen to select and confirm.
2.4 Volume< > In the volume interface, short press the up/down button or directly click the screen to select A, A/B or B, or long press the up button for 2s to directly enter A volume adjustment while long press the down button for 2s to directly enter B volume adjustment in the main interface. In the volume adjustment interface, short press the up/down button or directly slide the screen leftward/rightward to adjust the volume, then short press the power switch button to confirm.
2.5 Mode< > In the mode interface, short press the up/down button or directly click the screen to select track mode (Mono/ Stereo/Safety), then short press the power switch button to confirm. The safety mode is -6dB and only available in mono track.
Note: Using only one transmitter in stereo mode may result in only one channel of sound being recorded, so please choose as needed.
2.6 Lock< > Directly click the icon in the lock interface or short press the power switch button twice in the main interface to lock the screen, short press the power switch button twice again can unlock the screen. Only buttons are available for operation if the screen is locked.
19

2.7 Pair< >
In pair interface, directly click the screen to select A, B or both, then short press the power switch button or directly click "pair" on the right of the display to start pairing. If successfully paired, it will pop up prompts on the display and then return to the main interface with colorful icons. In the case of unpaired, it will still pop up prompts on the display and then return to the main interface with grey icons.

Pair Interface

Pairing

Successfully Paired

Pairing Failed 2.8 General< >

Successfully Paired with Transmitter A

2.8.1 Brightness< >
In the brightness interface, short press the up/down button or directly slide the screen leftward/rightward to adjust the screen brightness from 0% to 100%, then short press the power switch button to confirm.

Successfully Paired with Transmitters A and B

2.8.2 Screen Sleep< > In the screen sleep interface, short press the up/down button or directly click the screen to select 5min or off.
2.8.3 Language< > After the first bootup and the logo appears, it will automatically turn to the language setting interface. Short press the up/down button to select language, then short press the power switch button to confirm, or directly click the screen to select and confirm the language. During the subsequent use, user can enter the language menu and reset the language according to the above steps.
2.8.4 Factory Reset< > In the factory reset interface, short press the up/down button to select yes or no, then short press the power switch button to confirm, or directly click the screen to select and confirm. Press and hold the up/down button at the same time for 3s in power on status, the screen will display "factory reset" and the receiver will start factory resetting and return to the main interface after resetting.
2.8.5 Version< > In the version interface, short press the up/down button or directly slide the screen leftward/rightward to check firmware version and TX version.
21

4 2.8.6 Certification< > In the certification interface, short press the up/down button or directly slide the screen leftward/rightward to check the certification of the product.
3. Charging The receiver can be charged with power source connected through USB-C port.
Installing Instruction
1. Absorb the transmitter to the collar with magnetic back button, or clip it to the collar with magnetic back clip
22

2. Insert the receiver into the hotshoe base of the camera through back clip, connect the 3.5mm audio output port of receiver to the 3.5mm audio input port of camera with 3.5mm TRS-TRS connect cable.
Note: Since the magnetic back clip is detachable, do not lift it when attaching to heavy objects such as the camera, as the clip may disconnect and the camera will fall. 3. In case of using with smartphone, connect the 3.5mm audio output port of receiver to the USB-C port of smartphone with 3.5mm TRS to USB Type-C Adapter Cable.
23

4.If you need to connect to a computer, connect the receiver's USB-C port to the computer's port via the USB-A to USB-C cable, and select Magic XT1 for the sound input on the computer to use it.
24

Technical Data

System Model Transmission Type Pickup Pattern Frequency Range Max. SPL Sampling Rate Signal to Noise Ratio Max. Wireless Transmission Distance Working Environment Temperature Input/Output Parameters
Lithium Battery Parameters
Working Time
Charging Time
Dimension
Net Weight

Magic XT1 2.4GHz frequency hopping system Omnidirectional 20Hz-20KHz 115dB 48KHz/24Bit 70dB 200m (sight distance) -10 ~+50 TX Charging Points5V 80mA RX Charging Points5V 80mA(*2) RX USB-C Inputs5V 550mA TX3.8V, 80mAh, 0.304Wh RX3.8V, 680mAh, 2.58Wh TXApprox. 8h RXApprox. 16h(with two transmitters) TXApprox.2h RXApprox. 2.5h TX0.66"X0.35"X0.25" RX0.94"X0.94"X0.69" TX (excluding the magnetic back button)8g RX50g

Specifcations and data may subject to changes without notice.

The above data are derived from the measured value of Godox laboratory, and may vary or be inaccurate due to changes in the objective environment.

Maintenance
Avoid falling. Strong collision or vibration may malfunction the device. Keep dry. This product is not water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity. Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand. Keep away from strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
26

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warning
Operating frequency:2402MHz 2480MHz Maximum EIRP Power: -6.53dBm (TX)/ -5.85dBm (RX)
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity The device complies with RF specifications when the device used at 0mm from your body.
27

Marking Information
28

( ) ( )

12 3 12

0755-29609320-8062

Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Information
Customer Information Seller Information Note

Model
Name Address Name Contact Number Address Date of Sale

Product Code Number Contact Number
Note: This form shall be sealed by the seller.

Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type Parts

Name Product Main Body

Battery

Electrical parts e.g.battery charger, etc.

Other Items

Power Cable, Sync Cable, Battery Case, Windscreen Foam, Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc.

Maintenance Period(month) 12
3
3
No

Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site Without warranty

Godox After-sale Service Call 0755-29609320-8062

References

iLovePDF