Instructions for Intellitronix models including: MS9107B LED Digital Transmission Temperature Gauge, MS9107B, LED Digital Transmission Temperature Gauge, Digital Transmission Temperature Gauge, Transmission Temperature Gauge, Temperature Gauge, Gauge

Lisa

Installation Guide

Buy Intellitronix MS9107B, LED Digital Trans Temperature Gauge, Blue - Prime Buy

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 2 Pages, 169.75KB

Made in America

Lifetime Guarantee

Thank you for purchasing this instrument from Intellitronix. We value our customers!

INSTALLATION GUIDE LED Digital Transmission Temperature Gauge
Part Number: M9107

* Always disconnect the battery before attempting any electrical work on your vehicle.*

KIT COMPONENTS
 One (1) LED Gauge  One (1) S8013 temperature sender

WIRING INSTRUCTIONS
Note: Automotive circuit connectors are the preferred method of connecting wires. However, you may solder if you prefer.

Ground - Black Connect directly to an engine ground such as the engine block. For the most accurate readings, connect to the same ground as the sending unit.
Power ­ Red Connect to a switched +12V source such as the ignition switch.

Dimmer - Purple Connect to the parking lights to dim the LEDs 50% when the headlights are on. However, do not connect to the headlight rheostat control wire; the dimming feature will not work properly. Otherwise, connect to ground for permanent 100% brightness.

Temperature - Blue Connect to the output of the temperature sending unit.

#

#

#



References

• mailto:support@intellitronix.com