System Firmware Update Instructions for 2018 Pioneer CD Receivers
REMARKS
- If you have any difficulty carrying out these instructions, please contact Pioneer Customer Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
- ✔️ Please download and print these instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and in the order described below.
- ✔️ This update applies only to the following models and which are sold in Europe:
| Model | Model |
|---|---|
| DEH-S5000BT | MVH-S300BT |
| DEH-S4000BT | MVH-S030BT |
| DEH-S040BT | |
| DEH-S3000BT |
A. Check the Current Firmware Version of the Unit
PROCEDURE:
- Start the vehicle engine.
- If AV Source is On, Press and hold the [SRC/OFF] button to switch off the source.
- Press and hold the [SRC/OFF] button to display the Initial menu. Then press to confirm.
Image: Pioneer CD Receiver display showing the main menu with options like 'SYSTEM UPDATE', 'SYSTEM INFO', and the current firmware version.
- Rotate the Multifunction Control dial to select “SYSTEM UPDATE”, then press to confirm.
Image: Pioneer CD Receiver display showing 'SYSTEM UPDATE' selected on the 'INITIAL MENU'.
- Select the “SYSTEM INFO” to confirm the system info.
Image: Pioneer CD Receiver display showing 'SYSTEM INFO' selected.
- After the “SYSTEM INFO” screen appears, check the firmware version.
Image: Pioneer CD Receiver display shows 'SYSTEM INFO' with the firmware version displayed, e.g., 'VERSION 0822'.
If the version number is 8.15 or higher, it is not necessary to update the firmware. If the version number is lower than 8.15, it is necessary to update the firmware. Please continue to Step B.
B. Downloading the Firmware Update File
Download the correct file from the website to a folder on your computer.
| MODEL | DOWNLOAD | FIRMWARE | FIRMWARE SIZE | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DEH-S5000BT |
Related Documents
|
