Meross Wi-Fi Smart LED Bulb MSL100HK-EU
User Manual
Safety Information
RISC DE ȘOCURI ELECTRICE SAU ARSURI
- Ensure the power supply to the bulb to be replaced is turned off.
- Wait for the bulb to cool down before replacing it.
- Do not install the bulb with wet hands or while standing on a wet or damp surface.
- Suitable for use in working environments from -20°C to 40°C.
- Not suitable for emergency lighting.
Installation Instructions
Replace the current bulb with a Meross bulb.
[Diagram: A hand is shown holding a light bulb, with an arrow indicating replacement of the old bulb with a new Meross bulb.]
* Metal lampshades may reduce the performance of the Meross smart bulb.
Device Setup
- Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network.
- Ensure your device is covered by a strong Wi-Fi signal.
- The device supports iOS 13/iPadOS 13 or later. It is recommended to update your iOS or iPadOS to the latest version before pairing with the device.
- Download the Meross app.
- Launch the Meross app and log in to your account, or if you are a new user, register to create a new account.
- Tap the "+" icon to select the type of device you wish to add, then follow the instructions to complete the setup.
Attention:
- Once setup is complete, you will also be able to manage your device in the Apple Home app.
- If you have questions, please visit https://www.meross.com/support.
LED Indicator
- Blinks 3 times: Initialization process completed, switching to configuration mode.
- Blinks smoothly 2 times: Successful configuration (for MSL100 and MSL110 only).
- Smooth blinking from red through green to blue, from warm white to cool white: Successful configuration (for MSL120 only).
FAQ
- 1. How to reset the Meross bulb?
- First, set the bulb's control switch to the off position, then turn the light switch on and off 5 times. Please note that resetting the bulb to factory settings will erase all custom settings, and you will need to reconfigure the bulb.
- 2. Can I dim my Meross bulb using a standard wall dimmer?
- No. The Meross smart bulb does not support a standard wall dimmer. It can be dimmed using the Meross app.
- 3. The My Home app cannot add the device by scanning the QR code.
- You can tap "Don't Have a Code or Can't Scan" and enter the code manually.
Simplified Declaration of Conformity
Manufacturer: Chengdu Meross Technology Co., Ltd.
Address: Floor 3, Building A5, Shijicheng Road no. 1129, Gaoxin, Free Trade Trial Zone, Chengdu, Sichuan, China
Product: Smart Bulb
Model: MSL100HK-EU
The product conforms to Directive 2014/53/UE of the European Parliament and of the Council of 16 April 2014 on the approximation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/WE.
The declaration of conformity is available at: https://files.innpro.pl/Meross
Radio frequency: 2412-2472 MHz
Maximum radio frequency power: 17.64 dBm
Additional Product Information
Environmental Protection
Electronic waste labeled in accordance with the European Union directive must not be disposed of with other municipal waste. It is subject to separate collection and recycling at designated points. By ensuring that these are disposed of correctly, you will prevent potential negative consequences for the environment and human health. The system for collecting used equipment complies with local environmental regulations for waste disposal. You can obtain detailed information on this matter from your municipality, the sewage treatment plant, or the store where you purchased the product.
The product complies with the requirements of the so-called "New Approach" Directive of the European Union (EU), which relates to aspects of user safety, health protection, and environmental protection, specifying hazards to be detected and eliminated.
This document is a translation of the original instruction manual produced by the manufacturer.
The product must be maintained (cleaned) regularly by the user themselves or by specialized service centers, at the user's expense and cost. In the absence of information regarding cyclical maintenance or service actions required in the user instructions, it is necessary to periodically evaluate, at least once a week, the difference between the physical state of the product and a new physical product. If any discrepancy is detected or observed, urgent maintenance (cleaning) or service measures must be taken. If adequate maintenance (cleaning) is not performed and no action is taken when a different state is detected, permanent damage to the product may occur. The guarantor is not responsible for damages resulting from negligence.
Detailed information on the warranty conditions of the distributor/manufacturer is available at: https://serwis.innpro.pl/gwarancja
