Pro Audio | Dynacord
User Guide for DYNACORD models including: V Series, C Series, IPX Series, L Series, TGX Series, V Series Professional Audio Engineering Amplifiers, V Series, Professional Audio Engineering Amplifiers, Audio Engineering Amplifiers, Engineering Amplifiers, Amplifiers
Preface Core Technologies Amplifiers Fixed Install Amplifiers 8 V Series 10 C Series 12 IPX Series 14 Live Performance Amplifiers 16 L Series 18
File Info : application/pdf, 28 Pages, 4.43MB
DocumentDocumentPROFESSIONAL AUDIO ENGINEERING AMPLIFIERS AUDIO MATRICES SOFTWARE TABLE OF CONTENTS Preface 4 Audio Matrices Introduction 22 Core Technologies 6 MXE5 24 Amplifiers Software Fixed Install Amplifiers 8 SONICUE 26 V Series 10 C Series 12 IPX Series 14 Live Performance Amplifiers 16 L Series 18 TGX Series 20 3 sound quality without compromise is in our dna FOR MORE THAN 70 YEARS, DYNACORD HAS DESIGNED AND ENGINEERED PROFESSIONAL AUDIO ELECTRONICS -- PRODUCTS THAT OFFER UNPARALLELED PERFORMANCE AND PREMIUM QUALITY, THE PERFECT BALANCE OF POWER AND PRECISION. We have a passion for providing world-class amplification and processing that we share with our users. Our engineering competence is second to none in the industry sound quality without compromise is in our DNA and in every circuit we make. With each innovation we transfer generations of knowledge and experience, always pushing technology forward, always reinforcing our customers' trust. We seek to surpass the highest standards of today's audio professionals, audiences and performers. Our industrial design combines finely tuned form with featurerich functionality across every detail clean lines and clean sound and our dedication to durability is demonstrated in the industry's most rigorous product testing program. In applications where failure is not an option, you can rely on Dynacord to be heard loud and clear. 5 core technologies cycle by cycle current limiter Continue to make sound Maximizes reliability under all load conditions Able to drive low impedance 6 variable load drive (VLD) Patented technology allowing optimal allocation of output power in multichannel amplifiers Thanks to direct drive technology, combine Low-Z or High-Z 70V/100V loudspeakers using the same amplifier without the need of transformers VLD allows the max output power into 4 Ohms, 8 Ohms, 70V or 100V FIR-Drive FIR-Drive optimizes loudspeakers transducer linearity for precise, balanced sonic output Advanced limiter algorithms offer independent peak and thermal transducer protection, even in most demanding applications FIR filters available for a large range of portable and install loudspeakers powerTANK Supreme installation flexibility as it works as a power reservoir for the amplifier The total power of the amplifier distributed as needed across all output channels No waste of energy especially when driving multiple audio zones with different power requirements No manual configuration needed as powerTANK engages and adapts automatically power factor correction (PFC) Maximizes output power and reduces idle power Complete digital monitoring and control Wide range input for maximum flexibility Highest reliability thanks to Dynacord's protection algorithms junction temperature modelling (JTM) Component overheat protection by constant temperature modelling Ensures maximum output power Provides highest operational reliability ecoRAIL technology Reduces standby losses to a minimum All monitoring functions are maintained No transient currents or distortions during switching Fully automatized no user interaction needed 7 Fixed Install Amplifiers Built to thrive in the most demanding conditions, Dynacord amplifiers for permanent installation are trusted worldwide to deliver faultless results, round-the-clock, year after year. With intelligent system integration plus remote control and supervision software, Dynacord amps are driven by experience. Series APPLICATION IN-/OUTPUT CONNECTORS AMPLIFIER CHANNELS MAX OUTPUT POWER PER CHANNEL (IHF-A) @ 4OHMS TOTAL OUTPUT POWER 70/100 V DIGITAL SIGNAL PROCESSING SYSTEM REMOTE CONTROL OMNEO (DANTE & OCA) CONTROL PORT (GPIO) WARRANTY * optional with accessories ** @8OHM V Series Install Euroblock 2,4 500 W / 600 W ** 600 W C Series Install Euroblock 2 660-1800 W 1300-3600 W 3 years IPX Install Euroblock 4,8 1250-5000 W 5000-20000 W 5 years 9 amplifiers V Series FLEXIBLE, ENERGY-SAVING AND BUILT TO LAST Versatile two and four-channel power amplifiers for commercial installations at an attractive price point -- recommended for background music and announcements in small to mid-sized applications such as education, hospitality, retail, houses of worship and more. These are the ideal choice for consultants, specifiers and installers who are looking for robust, extremely versatile amplifiers that are quick to install and run trouble-free even under demanding power conditions. Main Features Installation versatility by multiple power drive options (4 ohms, 8 ohms, 70 V or 100 V ) utilizing Dynacord's patented VLD (Variable Load Drive) technology powerTANK technology allows direct access to the total power of 600 watts, to deliver asymmetric power across all channels (up to 500 W @4OHM per single channel) as needed Low cost of ownership by APD (Auto Power Down) and ecoRAIL technology Highest reliability by bullet-proof protection circuitry with sophisticated limiters dualCOOL technology and Power Factor Correction (PFC) for the power supply guarantee a flawless performance even in challenging environments 10 CHANNELS MAX OUTPUT POWER PER CHANNEL (IHF-A) @4OHM TOTAL OUTPUT POWER BRIDGING / PARALLEL 70/100 V OUTPUT POWER V600:2 2 500 W / 600 W * 600 W / V600:4 4 500 W / 600 W * 600 W / SIGNAL TO NOISE RATIO (A-WEIGHTED) >98 dB >98 dB AUDIO INPUT SIGNAL PROCESSING PROTECTION WEIGHT [LBS] DIMENSIONS (WXHXD) ARTICLE CODE * @8OHM 1 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 line in Switchable HP 100 Hz, 150 Hz, LP 150 Hz (24dB/Oct.) Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection 4.6 lb 1.74" x 8.6" x 10.6" V600:2-US 2 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 line in Switchable HP 100 Hz, 150 Hz, LP 150 Hz (24dB/Oct.) Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection 7.9 lb 1.74" x 19.2" x 10.6" V600:4-US 11 amplifiers C Series EQUIPPED WITH AN EXTREMELY ROBUST POWER SUPPLY AND A POWERFUL, LINEAR AMP DESIGN, FLAWLESS OPERATION IS GUARANTEED. Sophisticated protection circuitry ensures safe, reliable operation under all conditions. All four models are also suitable for direct drive applications with 70/100 V speaker lines, providing high flexibility for a variety of install scenarios. In addition, the amplifiers feature Euroblock connectors for convenient wiring, remote power-on delay, and GPIOs to interface with third-party controls. The onboard DSP allows multi-band PEQ, crossovers, limiting and delay per channel, as well as channel grouping. Software Systems can be configured, tuned and supervised with SONICUE Sound System Software. SONICUE brings a new way of working with an intuitive, guided workflow, operation from speaker view and various loudspeaker databases Main Features On-board DSP includes multi-band PEQs, crossovers, limiters and delay per channel; True channel grouping control with extra DSP capabilities including GEQ FIR-Drive combines technologies to create a sophisticated loudspeaker correction and protection system yielding a level of unparalleled performance Intuitive, powerful control software makes configuration and real-time control easy up to 16 amp channels can be controlled and monitored simultaneously Efficient standby power mode reduces running costs and power consumption by up to 90%, leading to a very low total cost of ownership 12 C1300FDi C1800FDi C2800FDi C3600FDi CHANNELS MAX OUTPUT POWER PER CHANNEL (IHF-A) @ 4 OHMS BRIDGING / PARALLEL 70/100 V OUTPUT POWER* SIGNAL TO NOISE RATIO (A-WEIGHTED) AUDIO INPUT DIGITAL SIGNAL PROCESSING PROTECTION CONTROL PORTS (GPIO) IN/OUT SYSTEM REMOTE CONTROL WEIGHT [LBS] DIMENSIONS (WXHXD) ARTICLE CODE ACCESSORIES 660 W 950 W 2 1400 W 1800 W / 70 V: 1 x 625 W >104 dB / 70 V: 2 x 1250 W (-1.5 dB) 100 V: 1 x 1250 W (-1.5 dB) >105 dB / 70 V: 2 x 1250 W 100 V: 1 x 1250 W 100 V: 2 x 2500 W @ (-3 dB) >107 dB / 100 V: 2 x 2500 W (-1.5 dB) >109 dB analog, Euroblock FIR-Drive speaker settings, 10 user and 5 array PEQs, user and array delay, limiters, load monitoring Audio limiters, high temperature, DC, HF, Back-EMF, Peak current, limiters, Inrush current limiters, Turn-on Delay 2 / 1 SONICUE 28.4 33.5 35.7 40.1 19.02" x 3.46" x 18.2" C1300FDi-US C1800FDi-US C2800FDi-US C3600FDi-US DC-RMK15 (rear rack mount kit) * direct drive load capabillity 13 amplifiers IPX Series THE MULTI-CHANNEL IPX 5:4, 10:4, 10:8 AND 20:4 POWER AMPLIFIERS MARK AN UNPRECEDENTED STANDARD FOR SOUND SYSTEM AMPLIFICATION IN MID TO LARGE-SIZED PERMANENT INSTALLATIONS. These high-performance amplifiers offer seemingly unlimited power and pristine audio quality. IPX series multi-channel power amplifiers feature OMNEO IP networking architecture and groundbreaking audio performance. They embody several proprietary amplifier technologies developed by Dynacord engineers, including Dynacord's renowned Variable Load Drive (VLD). Software IPX amplifiers have integrated OMNEO networking (Dante audio and OCA/AES70 control) and can be configured, controlled and operated from both IRIS-Net as well as SONICUE Sound System Software Main Features Three 4-channel models and one 8-channel model, offering a power density of 5 kW, 10 kW and even 20 kW from a single amplifier with all channels driven Advanced 96 kHz high-resolution digital signal processing for the highest performance, internal analog-to-digital conversion with ultra-low latency, and a superior signal-to-noise ratio ecoRAIL technology developed by Dynacord helps to reduce overall power consumption by up to 50 % VLD technology, as well as the newly developed parallel and parallelbridged operation modes. VLD technology allows the available output power of e.g. 1250 W per channel to be used at either 4 or 8 ohms, or via 70 V or 100 V lines in direct drive 14 IPX5:4 IPX10:4 IPX10:8 IPX20:4 CHANNELS MAX OUTPUT POWER PER CHANNEL (IHF-A) @ 4 OHMS* BRIDGING / PARALLEL 70/100/140**/200** V OUTPUT POWER SIGNAL TO NOISE RATIO (A-WEIGHTED) AUDIO INPUT 4 1250 W / 2000 W *** / 1250 / 1250 / 2500 / 2500 W 115 dB 4 2500 W 8 1250 W / 2000 W *** / 1250 / 1250 / 2500 / 2500 W / 1250 / 1250 / 2500 / 2500 W 115 dB 115 dB analog (Euroblock), Dante 4 1250 W / 2000 W *** / 3550 / 5000 / 5000 W / 118 dB SAMPLING RATE DIGITAL SIGNAL PROCESSING PROTECTION CONTROL PORTS (GPIO) IN / OUT SYSTEM REMOTE CONTROL WEIGHT [LBS] 96 / 48 kHz switchable User-EQ: 12 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass and Notch; 2 filters of them with additional asymmetric filter type User Delay: 0 to 2000 ms per channel (units: s, ms, s, cm, m, inches, feet) Array EQ: 5 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass, and All-Pass Array Delay: 0 to 500 ms per channel (units: s, ms, s, cm, m, inches, feet) Speaker EQ: 10 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Hi-Pass, Lo-Pass, and All-Pass Speaker X-Over: Hi-Pass and Lo-Pass per channel, 6/12/18/24/30/36/42/48 dB Bessel/Butterworth, 12/24/48 dB Linkwitz-Riley; Alignment Delay, 0 to 20 ms per channel Speaker FIR: up to 1025 taps, Linear Phase Filter, Linear Phase Brickwall X-Over Speaker Limiters: Peak Anticipation Limiter and RMS/TEMP Limiter per channel Other: Source Selection and Mix, Level, Mute, Polarity, Sine and Noise Generator, Level Meters, Impedance Measurement, and Load Monitoring Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over-/Undervoltage Protection 3 SONICUE, IRIS-Net (Dante, OCA/AES70), plug-in for Q-Sys 31.5 33 37.1 40.3 DIMENSIONS (WXHXD) 19.02" x 3.46" x 20.2" ARTICLE CODE IPX 5:4 IPX 10:4 IPX 10:8 IPX 20:4 ACCESSORIES PCO32A30-US Powercord, powerCon 32 to NEMA L5-30 mains connector, 2m / DC-RMK15 (rear rack mount kit) * all channels driven ** bridge mode *** asymmetrical drive 15 Live Performance Amplifiers Built for the rigors of the road and ready to deliver the ultimate combination of audio quality and extraordinary power output, Dynacord amplifiers for live sound will ensure the show always goes on. With audio networking for touring systems and larger shows, plus the ease of use that ensures smaller productions are effortless, Dynacord amps are driven by experience. Series APPLICATION IN/OUTPUT CONNECTORS AMPLIFIER CHANNELS MAX OUTPUT POWER PER CHANNEL (IHF-A) @ 4 OHMS DIGITAL SIGNAL PROCESSING SYSTEM REMOTE CONTROL OMNEO (DANTE & OCA) WARRANTY L Series Live NL4, XLR 2 660-1800 W 3 years TGX Series Live NL4, XLR 4 2500-5000 W 5 years 17 amplifiers L Series L SERIES POWER AMPLIFIERS PROVIDE A BEST-INCLASS, TOUR-GRADE FEATURE SET THAT BRINGS REAL PROFESSIONAL PERFORMANCE TO A NEW, MORE ACCESSIBLE PRICE POINT. Like all Dynacord amplifiers, the L Series offers high-quality components and truly professional processing power and performance characteristics. Its engineering and applied technologies enable exceptional sound quality with plenty of headroom. Equipped with an extremely robust power supply and a powerful linear amp design, flawless operation is guaranteed even in the most demanding environments. A sophisticated protection circuit ensures safe, reliable operation under all conditions. Software Systems can be configured, tuned and supervised with SONICUE Sound System Software. SONICUE brings a new way of working with an intuitive, guided workflow, operation from speaker view and various loudspeaker databases Main Features On-board DSP includes multi-band PEQs, crossovers, limiters and delay per channel; True channel grouping control with extra DSP capabilities including GEQ FIR-Drive combines technologies to create a sophisticated loudspeaker correction and protection system yielding a level of unparalleled performance Intuitive, powerful control software makes configuration and real time control easy up to 16 amp channels can be controlled and monitored simultaneously High-performance bulletproof voltage handling Engineered for constant stability at 2 ohms 18 CHANNELS MAX OUTPUT POWER PER CHANNEL (IHF-A) @ 4 OHMS BRIDGING / PARALLEL SIGNAL TO NOISE RATIO (A-WEIGHTED) AUDIO INPUT SAMPLING RATE DIGITAL SIGNAL PROCESSING PROTECTION SYSTEM REMOTE CONTROL WEIGHT [LBS] DIMENSIONS (WXHXD) ARTICLE CODE ACCESSORIES L1300FD 660 W L1800FD L2800FD 950 W 2 1400 W L3600FD 1800 W / / / / >104 dB >105 dB >107 dB >109 dB analog, XLR 48 kHz FIR Filters, Audio Limiters, Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance Audio limiters, high temperature, DC, HF, Back-EMF, Peak current, limiters, Inrush current limiters, Turn-on Delay SONICUE 28.4 33.5 35.7 40.1 19.02" x 3.46" x 18.2" L1300FD-US L1800FD-US L2800FD-US L3600FD-US DC-RMK15 (rear rack mount kit) 19 amplifiers TGX Series TGX 4-CHANNEL LIVE SOUND AMPLIFIERS FROM DYNACORD ARE ONE OF THE MOST POWERFUL ON THE MARKET AND REPRESENT THE PINNACLE OF PRO AUDIO ELECTRONICS ENGINEERING. Along with unprecedented power density, they offer Dynacord's signature audio quality, advanced reliability and power efficiency. Engineered and manufactured in Germany, TGX amplifiers are built as the ultimate amplification solution for large-scale live performance sound applications. They embody several proprietary amplifier technologies developed by Dynacord engineering, one of the most experienced R&D teams in the audio industry. A preconfigured system rack is available, including three TGX20 DSP amplifiers, power distribution, input and output interfaces and network redundancy. Main Features Market-leading power density with 20 kW in 2RU Tour-grade 96 kHz DSP includes multi-band PEQs, crossovers, limiters and delay per channel FIR-Drive and speaker preset library on board yield a level of unparalleled audio quality Integrated networking with proven Dante Audio and OCA / AES70 remote control Reliable voltage handling Uncompromising stability down to 2 ohms 20 CHANNELS MAX OUTPUT POWER PER CHANNEL (IHF-A) @ 4 OHMS SIGNAL TO NOISE RATIO (A-WEIGHTED) AUDIO INPUT SAMPLING RATE DIGITAL SIGNAL PROCESSING PROTECTION SYSTEM REMOTE CONTROL WEIGHT [LBS] DIMENSIONS (WXHXD) ARTICLE CODE ACCESSORIES TGX10 4 2500 W TGX20 4 5000 W SR-TGX 20* 12 5000 W 115 dB 118 dB 118 dB analog (XLR / NL), AES, Dante 96 / 48 kHz switchable User-EQ: 12 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass and Notch; 2 filters of them with additional asymmetric filter type User Delay: 0 to 2000 ms per channel (units: s, ms, s, cm, m, inches, feet) Array EQ: 5 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass, and All-Pass Array Delay: 0 to 500 ms per channel (units: s, ms, s, cm, m, inches, feet) Speaker EQ: 10 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Hi-Pass, Lo-Pass, and All-Pass Speaker X-Over: Hi-Pass and Lo-Pass per channel, 6/12/18/24/30/36/42/48 dB Bessel/Butterworth, 12/24/48 dB Linkwitz-Riley; Alignment Delay, 0 to 20 ms per channel Speaker FIR: up to 1025 taps, Linear Phase Filter, Linear Phase Brickwall X-Over Speaker Limiters: Peak Anticipation Limiter and RMS/TEMP Limiter per channel Other: Source Selection and Mix, Level, Mute, Polarity, Sine and Noise Generator, Level Meters, Impedance Measurement, and Load Monitoring" Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over-/Undervoltage Protection SONICUE, IRIS-Net (Dante, OCA/AES70) 33.0 40.4 272.7 19.02" x 3.46" x 20.2" 23.6" x 28.3" x 25.8" TGX10 TGX20 SR20TGX PCO32A30-US Powercord, powerCon 32 to NEMA L5-30 mains connector, 2m / DC-RMK15 (rear rack mount kit) acessories NOT for the rack, only for the amps * 3 amplifiers are mounted in the rack including switches and connection panel 21 Audio Matrices Integration, Flexibility and Performance Dynacord audio matrices are equipped with the most advanced DSP, offering comprehensive supervision and system control. Designed for fixed installation and live sound applications, Dynacord audio matrices support networked, IP-based processing and Dante audio. Dynacord's applied technologies ensure superior sound quality with ultra-low latency for a flawless, uninterrupted audio performance even under most demanding conditions. APPLICATION IN-/OUTPUT CONNECTORS MATRIX SIZE SYSTEM REMOTE CONTROL AUDIO INPUTS / OUTPUTS NETWORKED AUDIO WARRANTY * with SONICUE 1.3 or higher MXE5 Install / Live Euroblock 24 x 24 (fixed config), 128 x 128 (free config)* SONICUE (OCA/AES70) 12 mic line / 8 line, 24/24 Dante OMNEO, Dante (AES67) 3 years 23 audio matrices MXE5 THE MXE5 IS THE FIRST MEMBER OF THE MXE MATRIX MIX ENGINE SERIES. THE AUDIO MATRIX WITH FREE OR FIXED DSP STRUCTURE OFFERS BOTH ROUTING AND MIXING FUNCTIONALITIES, WITH 12 ANALOG MIC/LINE INPUTS AND EIGHT LINE OUTPUTS. At the same time, the MXE5 serves as a communications hub for all IP-based peripherals and provides comprehensive supervision of all system-wide commands. Thanks to SONICUE, the MXE5 can be assigned with personalization features, rights management and GPIO configuration. There are two optional panel controllers. The TPC-1 touch panel controller which has a low-profile form factor and features a 5.7" HD display and the WPN1, a compact PoE powered wall panel controller featuring a 1.77" color TFT display and a single-knob encoder. Software The MXE5 integrates completely with Dynacord's SONICUE Sound System Software, one of the most powerful software interfaces in the industry, offering comprehensive control and easy, intuitive operation Main Features Delivering the highest audio quality The MXE5 benefits from advanced DSP, providing outstanding audio quality and dynamic range. This is ensured by a sampling rate of 96 kHz and the industry's lowest audio latency of less than 0.22 ms Ready for a wide range of applications The MXE5 is designed for consultants, production companies, specifiers and system integrators who demand the highest-quality BGM and uncompromising live performance sound Made for mixing and routing The MXE5 offers a variety of functions beyond being a powerful crosspoint matrix; it also works as both a system manager and an OCA controller with complete monitoring and supervision abilities 24 MXE5 MATRIX SIZE AUDIO INPUTS / OUTPUTS ANALOG AUDIO INPUTS / OUTPUTS DIGITAL SIGNAL TO NOISE RATIO (A-WEIGHTED) THD+N (1DB BELOW MAX. @ 1 KHZ) SAMPLING RATE DIGITAL SIGNAL PROCESSING SIGNAL LATENCY ANALOG IN TO OUT REMOTE CONTROL SOFTWARE SAFETY/REDUNDANCY CONTROL PORTS WEIGHT DIMENSIONS (WXHXD) ARTICLE CODE ACCESSORIES 24 x 24 (fixed config), 128 x 128 (free config)* 12 mic/line, 8 24 OMNEO / Dante >118 dB < 0.0002 % 48 kHz / 96 kHz 32/40 bit, floating point < 0.45 ms (48 kHz), < 0.22 ms (96 kHz) SONICUE Sound System Software Internal supervision, system monitoring, watch dog, fault output, redundant audio network supported 8 GPIO (digital in/out, analog in) Ready/Fault 6.0 kg / 13.2 lbs 483 x 43.5 x 471 mm (19", 1 RU) MXE5 TPC-1, Touch Panel Controller 5.7"; WPN1 Wall Panel Controller; CP-MXE connector panel (XLR) for MXE * with SONICUE 1.3 or higher 25 Software 26 SONICUE THE SMOOTH WAY TO DRIVE YOUR SOUND SONICUE Sound System Software simplifies the set-up, tuning and operation of professional sound reinforcement systems driven by TGX, IPX, L- and C Series amplifiers or RCM-28 retrofitted amplifiers and MXE series matrices Intuitive operation and direct interaction ensured by comprehensive overview of the entire sound system Guided workflows offer maximum flexibility to save time and achieve best results with minimum effort Supports the powerful Task Engine in MXE5 for creation of advanced tasks without coding skills Customized control panel design for PC desktop panels as well as TPC-1 and WPN1 wall panels, advanced system logic with MXE5 Future-proof architecture: designed for multi-OS and third party plug-ins such as prediction or measuring software Engineered speaker settings are available: allowing the integration of many brand's speaker systems with Dynacord amplifiers and DSPs 27 HEADQUARTER ADDRESSES NORTH AMERICA GLOBAL HQ Bosch Security Systems, Inc. Burnsville, MN +1-952-884-4051 EUROPE REGIONAL HQ Bosch Sicherheitssysteme GmbH (EVI Audio GmbH) Straubing, Germany +49 9421 706-0 LATIN AMERICA REGIONAL HQ Robert Bosch, Limitada Security Systems Campinas, SP, Brasil +55 19 2103-4282 ASIA PACIFIC REGIONAL HQ Robert Bosch (SEA) Pte Ltd Singapore +65 6571 2808 dynacord.com | DC012/23_LA/NA | © 2023 Bosch Security Systems, Inc. Information in this document is subject to change without notice. All trademarks are the copyrights of their respective owners. CHINA REGIONAL HQ Bosch (Shanghai) Security Systems Ltd. IBP, Changning District Shanghai, P.R. China 400-8310-669