User Manual for Prestel models including: KB-IP9N, KB-IP9N IP and Serial Joystick Remote Control Keyboard, IP and Serial Joystick Remote Control Keyboard, Joystick Remote Control Keyboard, Remote Control Keyboard, Keyboard
Пульт управления для PTZ камер Prestel KB-IP9N
File Info : application/pdf, 22 Pages, 1.34MB
DocumentDocumentPrestel KB-IP9N
IP&Serial Joystick Remote Control Keyboard
USER MANUAL
Catalog
1. Security Guidance.......................................................................................................................2 1.1 Cautions........................................................................................................................................2 1.2 Notice......................................... ........ ..........................................................................................2
2. Check Before Using....................................................................................................................3 2.1 Packing List.................................................................................................................................3 2.2 The Wiring...................................... ........ ...................................................................................3 2.3 Bottom Dialing Switch...........................................................................................................3
3. Keyboard Description..............................................................................................................4 3.1 Functional Features..................................................................................................................4 3.2 Technical Specifications........................................................................................................5 3.3 Product Size................................................................................................................................5 3.4 Interface Description..............................................................................................................6 3.5 Display Screen Content..................... ........ ........ .................................................................6 3.6 Button Function........................................................................................................................7
4. Menu Setting...................................................................................................................................11 4.1 Operating Instructions..........................................................................................................11 4.2 Menu options............................................................................................................................11
5. Wiring diagram............................................................................................................................13 5.1 Connection in network mode............................................................................................13 5.2 Connection in RS232 mode...............................................................................................14 5.3 Connection in RS422 mode...............................................................................................15 5.4 Connection in RS485 mode...............................................................................................15 5.5 Cascade in RS232, RS422, RS485 mode....................................................................16
6. WEB Configuration.................................................................................................................18 6.1 Login WEB...............................................................................................................................18 6.2 Device Control........................................................................................................................18 6.3 Network Paramete.................................................................................................................19 6.4 Firmware Upgrade.................................................................................................................19 6.5 Reset Options...........................................................................................................................19 6.6 Account.......................................................................................................................................20
7. Frequently Asked Questions............................................................................................21
1
1. Security Guidance
1.1 Cautions: Before using the product, please read this safety instruction carefully, operate
strictly in accordance with the instruction manual, and keep this manual properly for future reference.
The standard power supply voltage is DC 12V and the rated current is 1A. It is recommended to use with the power adapter that comes with the product.
Please place the power cable and control cable in a place where they will not be trampled on, and protect the cable, especially the connection part must be firm.
Please use this product within the allowable temperature and humidity range. Operating temperature: -10~ 50, humidity 80%.
Do not spill liquids, especially corrosive liquids, on this product to prevent danger.
Please don't put heavy pressure, violent vibration and immersion during transportation, storage and installation to avoid damaging the product.
Please do not disassemble this product without permission, there are no parts inside the machine that can be repaired by the user, please leave the work to qualified maintenance personnel.
Power supply polarity:
1.2 Notice: Please refer to the actual product, the user manual is for reference only.
Please contact our Customer Service Department for the latest procedures and additional documentation.
In case of doubt or dispute in the user manual, the final interpretation of the company shall prevail.
2
2. Check Before Using
2.1 Packing List When opening the package, please check and confirm all the accessories that should be provided. Control keyboard·········································································· 1PCS Power Adapter············································································· 1PCS Power Cord·················································································1PCS RS232 Cord················································································ 1PCS User Manual··············································································· 1PCS Certificate of Conformity································································ 1PCS Warranty Card············································································· 1PCS Quick Guide················································································1PCS
2.2 The Wiring
2.3 Bottom Dialing Switch
Bottom dial control
Mode SW-1 SW-2
Description
1
*
OFF
ARM Upgrade Mode
2
*
ON
Normal Working Mode
SW-1 is reserved, no function defined
3
4. Menu Setting
3.1 Functional Features: Support network interface, RS232 interface, RS422 interface and RS485
interface for control.
Supports VISCA Serial, Pelco-P, Pelco-D, VISCA over IP, VISCA TCP, VISCA UDP, ONVIF, and NDI protocols for control. (NDI protocol is optional.)
With seven camera shortcut control buttons, to improve the speed of multiple cameras control switching, convenient and fast.
Support setting different protocols to control multiple cameras with different protocols.
Support one keyboard to control multiple cameras, also support multiple keyboards to control a camera through the network interface.
Adapts four-dimensional joystick to enable the control of the video camera PTZ movement smoothly and flexibly.
Support to set different levels of operation permission via OSD menu.
Support button keys backlight, enable users to choose automatic backlight in low light or dark environment.
Support set, call and clear presets.
Support camera PT speed and zoom speed adjustment, while supporting preset position PT speed and zoom speed adjustment.
Support daisy chain function. (Max 7 cameras are available)
Support camera OSD menu setting.
Supports standard POE (Power Over Ethe).
Support 10M, 100M adaptive network RJ45 connection.
Support both Chinese and English menu interface.
4
4. Menu Setting
3.2 Technical Specifications
Parameters Control Interface RJ45 RS232 RS422 RS485
Support Protocols
Upgrade Interface Display Screen Working power Working Temperature Working Humidity Storage Temperature Storage Humidity Size Weight
Indicators RJ45,RS232,RS422,RS485 Ethernet portPOEIEEE802.3af
DB9 male connector 3.81 spacing terminalTTRR
3.81 spacing terminalTT VISCA Serial, Pelco-P, Pelco-D, VISCA over IP, VISCA TCP, VISCA UDP, ONVIF, NDI(optional)
Type-C 3.12" OLED screen, blue light, 256×64 pixels
Dis1p2lVayS1cAreen -10~50 80% -20~60 90%
320.5mm×156.5mm×118mm 1.05kg
3.3 Product Size
5
4. Menu Setting
3.4 Interface Description
1. Lock hole 2. Upgrade interface 3. RS232 interface 4. RS485 interface
5. Network interface 6. Power interface 7. Indicator light 8. Adjusting knob
3.5 Display Screen Content
9. Button 10. Joystick 11. Display screen 12. Dial switch
6
4. Menu Setting
3.6 Button Function
3.6.1 Shortcut Selection Area CAM1~CAM7 Select the corresponding camera.
Note: Camera IP address can be quickly switched. In IP control mode, directly enter the last set of digits of the camera IP address on the keyboard, and then press CAM1~CAM7 keys, you can quickly switch the current number of camera IP address to the number IP entered, so that you can support 1~254 camera IP address fast switching.
0~9+CAM1~CAM7 Enter the camera IP address (last three digits), and then select one of the CAM1~CAM7 keys to quickly connect to this camera.
3.6.2 Adjustment Knob Area, 3A Setting Area AE MODE There is the word "AUTO" next to the button AE MODE. When the "AUTO" light is on, automatic exposure mode is triggered; when the "AUTO" light is OFF, the other modes manual exposure, shutter priority, iris priority, bright priority can be selected, and at this time, the three knobs on the left side of the keyboard can adjust the shutter, iris, gain, bright and other parameters.
7
4. Menu Setting
WB MODE There is the word "AUTO" next to the button WB MODE. when the "AUTO" light is on, it is AUTO and ATW mode; when the "AUTO" light is off, the manual, indoor and outdoor, Sodium lamps, fluorescent lamps mode can be selected, then the camera red gain and blue gain can be adjusted through the first two knobs on the left side of the keyboard.
TRIGGER triggered once.
In Onepush mode ("WB PUSH" light is on), the automatic white balance is 8
4. Menu Setting
G/F / AF/MF The word "AF" is next to the key G/F / AF/MF. When the "AF" light is on, it is the automatic focus mode; when the "AF" light is not on, it is the manual focus mode, which can be adjusted by the third knob on the left side of the keyboard.
Short press G/F / AF/MF Switch the control gain and control focus mode. When in focus mode, the "FOCUS" light above the third knob on the left will be on.
Long pressG/F / AF/MF Switch between auto focus mode and manual focus mode. PUSH FOCUS Triggers autofocus once.
3.6.3 Numeric Button Area 0~9+SET Set the presets. 0~9+ Short pressCALL/CLEAR Call the presets. 0~9+ Long pressCALL/CLEAR Clear the Presets.
Note: Up to 128 presets can be set and recalled.
3.6.4 Parameters and Speed Adjustment Area SHARPNESS/PRESET SPEED Adjust the sharpness. / Adjust the preset speed. WDR/PT SPEED Adjust the WDR. / Adjust the camera PT speed. CONTRAST/Z SPEED Adjust the contrast. / Adjust the camera zoom speed. SATURATION/ZOOM Adjust the saturation. / Adjust the camera lens zoom.
Note: Press the SHIFT button to switch between parameter setting mode and speed setting mode, and the display will show "S".
When "S" is shown on the display, these 4 buttons can be used for parameter setting. When the display does not show "S", these 4 keys can be used for speed setting and zooming.
3.6.5 Other Button Areas BLC / AT CONTRCL Backlight compensation switch, Auto-tracking switch. (Press the
9
4. Menu Setting
SHIFT button to switch.) SHIFT Switch between parameter adjustment mode and speed adjustment mode. SEARCH / AT MODE Search for IP address, Auto-tracking mode toggle in the menu. (Press
the SHIFT button to switch.) HOME/OK Return to the original position of the camera. POWER/RESET Short press to control the camera power, long press to reset the camera. CMENU/KMENU Short press to open the camera menu, long press to open the keyboard
menu. 3.6.6 Joystick Control UpDownLeftRight Offset the joystick to control the camera to 4 directions. Zoom Turn the joystick clockwise to zoom in. Zoom Turn the joystick counterclockwise to zoom out. Lock When controlling the camera, press the "lock" button, the camera keeps rotating in the
previous control direction until the set lock time is exceeded or the camera rotates to the limit position.
10
4. Menu Setting
4.1 Operating Instructions: 1. Long press CMENU/KMENU to open the keyboard menu; Adjust the joystick
Up and Down to view the menu options; Right to enter the next option; Left to return to the previous option, short press CMENU/KMENU can also return to the previous option; numeric keys 0~9 can set the corresponding parameters in some options.
2. In the keyboard menu, you need to set the corresponding protocol, address in order to control the camera properly.
4.2 Menu options:
System setting
Language Brightness BackLight Screen Prt DHCP Locol IP Mask Gateway Run Link Reset
Chinese/English 1~15 AUTO/ON/OFF 10s~180s OFF/ON 192.168.001.180Can be set 255.255.255.000 192.168.001.001 OFF/ON NO/YES
Camera setting
Camera Protocol IP Addr / Address
Port / Baundrate Username Password
The keyboard can be set with 7 addresses: CAM1~CAM7
VISCA Serial, Pelco-P, Pelco-D, VISCA over IP, VISCA TCP, VISCA UDP, ONVIF, NDI(optional)
Set the camera IP address or camera address.
Set the port or baud rate. Default port numbers for each IP protocol: ONVIF: 8000, NDI: 5961, VISCA: 52381
Username setting, default: admin
Password setting, default: admin
PTZ setting
Pan Reverse
The left and right direction of the keyboard control can be switched. 11
4. Menu Setting
Tilt Reverse Preset PT Spd Preset Z Spd Foucs Speed Lock Time
The up and down direction of the keyboard control can be switched. Set preset PT speed: 5~24 Set preset Zoom speed: 1~7 Set focus sensitivity: 0~7 Set of lock time: 2~20(s)
Password setting
New PSD Confirm Enable Version
Set a new password to access the keyboard menu Reconfirm the new password to access the keyboard menu Password switch to access the keyboard menu Keyboard program version number and update date
12
5. Wiring diagram
5.1 Connection in network mode: 5.1.1 The keyboard is on the same LAN as the camera: The keyboard connects
to the switch through the network cable, and the camera connects to the switch through the network cable. In the same LAN, set the same network segment, and set the corresponding protocol, IP address and port number, you can control the camera through the keyboard.
5.1.2 The keyboard is directly connected to the camera: The keyboard is connected to the camera through the network cable, set the same network segment, and set the corresponding protocol, IP address and port number, you can control the camera through the keyboard.
13
5. Wiring diagram
5.2 Connection in RS232 mode: The keyboard connects to the camera via RS232 cable, set the corresponding
protocol, address and baud rate, and you can control the camera via the keyboard.
Line Sequence Using the RS232 connection, pin 1 RXD of the keypad is connected to the camera input interface TXD, pin 2 TXD of the keypad is connected to the camera RXD and pin 3 of the keypad is connected to the camera GND. (It is also possible to use the standard RS232 interface of the control keypad to connect to the camera.
Pin Number
2
3
5
DB9 Male (Pin type)
Signal Definition
RXD TXD GND
1,4,6
Internal connection
7,8
Internal connection
14
5. Wiring diagram
5.3 Connection in RS422 mode: The keyboard connects to the camera via RS422 cable, set the corresponding
protocol, address and baud rate, and you can control the camera via the keyboard.
Line SequenceUsing the RS422 bus connection, the keyboard pin 1 TXD + connects to the camera's RXD-, the keyboard pin 2 TXD - connects to the camera's RXD +, the keyboard pin 3 RXD + connects to the camera's TXD -, the keyboard pin 4 RXD - connects to the camera's TXD+.
Note: Some cameras do not support RS422 control. 5.4 Connection in RS485 mode:
The keyboard connects to the camera via RS485 cable, set the corresponding protocol, address and baud rate, and you can control the camera via the keyboard.
15
5. Wiring diagram
Line SequenceUsing the RS485 bus connection, the keyboard pin 1 TXD + connected to the camera RXD-, the keyboard pin 2 TXD- connected to the camera RXD +.
5.5 Cascade in RS232, RS422, RS485 mode The keyboard connects the RS232-IN port of camera No. 1 through RS232,
RS422, RS485 lines, and then connects the RS232-IN port of camera No. 2 through the RS232-OUT port of camera No. 1 with a cascade line, and finally sets the corresponding protocol, address and baud rate on the keyboard to control camera No. 1 or camera No. 2 through the keyboard.
16
5. Wiring diagram
Line SequenceUsing RS232 cascade connection, the output of the keyboard is connected to the input of camera No. 1, the output of camera No. 1 is connected to the input of camera No. 2, and so on.
The connection method using RS422 and RS485 cascade is roughly the same as that of RS232.
17
6. WEB Configuration
6.1 Login WEB The keyboard and computer
connected to the same LAN, open the browser, enter the IP address (default IP address is 192.168.1.180), enter the login interface, you can choose the language (Chinese or English), enter the username and password to login, as shown on the right.
(Default username: admin Default password: admin) After successful login, you will be taken directly to the system configuration screen, as shown below.
6.2 Device Control 6.2.1 Device Search Search for IP addresses and protocols of cameras on the same LAN and add them
to the keyboard configuration; you can also add camera IP addresses and protocols manually.
6.2.2 Device Configuration Modify and delete the IP address, protocol and port number of the already
configured camera.
18
6. WEB Configuration
6.3 Ethernet Parameter Set the network parameters of the
keyboard, including DHCP switch, IP Address, Netmask, Gateway, DNS, HTTP Port.
6.4 Firmware Upgrade Check the keyboard device name and
version information, and also, you can upload files to upgrade the keyboard system. Please do not power off during the upgrade process.
6.5 Reset Options Perform a complete reset or reboot of
the keyboard. Reset/Reboot: Resets all parameters and
reboots the device. Reboot: Reboot the device. 19
6. WEB Configuration
6.6 Account Set the login and password of the
keyboard. First enter the Account number that
needs to be set, then enter the password that needs to be set twice (Password, Confirm Password), and then click "Save".
After setting the account number and password, please remember the account number and password, otherwise you will not be able to log in the WEB side interface.
20
7. Frequently Asked Questions
Frequently Asked Questions
Adverse Description
Solution Ideas
Check if the network cable is connected properly.
Check whether the camera supports the set protocol.
Check if the keyboard screen shows connected. The display of " "
The keyboard cannot control the camera in network mode.
indicates a successful connection. Check whether the IP address, protocol and port number set on the keyboard are consistent with those of the camera.
Check if the keyboard and the camera are on the same LAN.
Check whether the keyboard's local IP address and the camera's IP
address are in the same network segment.
Check whether the RS232, RS422, RS485 cables are good and
The keyboard cannot control the camera in RS232, RS422, RS485 mode.
whether the interface is loose. Check whether T+, T-, R+, R- of RS422 are connected wrongly; check whether T+, T- of RS485 are connected backwards. Check that the address, protocol and baud rate set on the keyboard
are consistent with those of the camera.
Some cameras can be
Check if the wiring of each part is normal.
controlled, some cameras
Check that the parameters of each address code of the keyboard are
cannot be controlled.
consistent with those of the respective camera.
When controlled with the keyboard, multiple cameras are controlled together.
Check that the protocols and addresses of the cameras being controlled together are consistent.
21