Bluetooth Wireless Dual Mode Mouse

Thank you for your support of this product. To give you a better understanding of the use of Bluetooth Wireless dual-mode mouse, please read carefully before using this manual!

1. Packaging Content

• 1x Bluetooth Wireless Mouse
• 1x Mouse Bluetooth technology USB receiver
• 1x Charging wire
• 1x Instruction Manual

2. Basic Parameters

3. System Requirements

SYSTEM COMPATIBILITY: Windows 7/8/8.1/10/Mac/Android

Hardware compatibility: The PC has an available USB port.

4. Product Features

Diagram Description: The diagram shows a mouse with labels for the left button, middle button, right button, scroll wheel, USB charging port, and an ON/OFF switch. It also indicates the Bluetooth mode DPI settings (800-1200-1600) and the 2.4G connection indicator.

Instructions for use

2.4G mode

1. Unplug the bottom USB receiver and plug it into the computer.
2. Turn on the switch at the bottom of the mouse and push it up to 2.4G mode.
3. The mouse and the USB receiver can be used normally after matching the code for 5 seconds.

5.0 Bluetooth Mode

1. Turn on the switch at the bottom of the mouse and push it down to Bluetooth mode.
2. Turn on the mobile phone or computer device, click Settings, click Bluetooth. Search for the Bluetooth device BT5.2Mouse and click the link.
3. Wait for 5 seconds, the connection is successful. You can use it normally.

Warning

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.