User Manual for LOOWOKO models including: PWM03, 2AYA9-PWM03, 2AYA9PWM03, Magnetic Wireless Power Bank, PWM03 Magnetic Wireless Power Bank, Wireless Power Bank, Power Bank
Shenzhen LOOWOKO Technology Limited PWM03 Magnetic wireless power bank 2AYA9-PWM03 2AYA9PWM03 pwm03
File Info : application/pdf, 1 Pages, 310.59KB
DocumentDocumentMagnetic Wireless Power Bank (PWM03) Product Introduction Thank you for choosing our Magnetic wireless Power Bank Please read over carefully and keep this manual for your records Wireless Charging area Charging the device 1. Connecting the Type-C interface of the Magnetic wireless Power Bank to the power adapter 2.The Battery indicator glow white in charging mode For a more accurate display of the power level, it is recommended to perform two charge/discharge cycles. Wireless Charging the phone put the device on the middle of the phone back, it can be adsorbed automatically and charging the phone at the When using wireless charging, the wireless charging indicator is always on; after disconnecting from the phone, the wireless charging indicator flashes slowly for 10 seconds and then turns off; when the wireless charging area touches a metal foreign object, the wireless charging indicator flashes quickly Wired Charging the phone Use the charging cable to connect the magnetic wireless power bank and your phone User Manual ON/OFF Battery indicator Fault indicator Type-C In/Output Type-C Input Type-C Output Wireless applicable device Devices built-in wireless charging receiver and support fast wireless charging (Galaxy S9 Plus/S10/S10 Plus/Note 10/Note 10 Plus, Huawei P30 Pro/Mate30/Mate30 Pro/P40 Pro stand charger for Iphone XS Max/Xr/11/11 Pro/11 Pro Max and all Qi-enabled devices) Magnetic charging equipment (Iphone 12mini/12/12Pro/12Pro Max) (Iphone 13mini/13/13Pro/13Pro Max) Specifications Model No.: Capacity: Type-C Input: Type-C Output: Wireless Output: PWM03 10000mAh/ 3.85V/38.5Wh 5V3A,9V2.2A,12V1.67A 5V3A,9V2.2A,12V1.67A 5W7.5W10W15W 3-6mm 75% 104×70.15×14.5mm 192G (NW) Standard accessories NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Type-C cable User ManualAdobe PDF library 16.03 Adobe Illustrator(R) 24.0