SOERDMX 230 7R Beam Moving Head Stage Light User Manual

User Manual for SOERDMX models including: 230 7R Beam Moving Head Stage Light, 230 7R, Beam Moving Head Stage Light, Head Stage Light, Stage Light

ñ⁄ô.f

keyong

Instructions for Use (IFU) (PDF)

SOERDMX 230 7R Beam Moving Head Stage Light for dj,livehouse,Club,Party,ktv,Wedding (4pcs(pro)) : Musical Instruments

File Info : application/pdf, 14 Pages, 1.31MB

A1ulP2WY3SL

BEAM MOVE HEAD LIGHT
USER MANUAL

CONTENTS
Chapter 1 Installation and attention .................................................................................................1 1.1 Maintenance.......................................................................................................................1 1.2 Statement ......................................................................................................................... 1 1.3 Safety Precaution ............................................................................................................1 1.4 Product Instruction .......................................................................................................... 1 1.5 Cable connectionDMX .............................................................................................. 2 1.6 Rigging (Optional) .............................................................................................................2
Chapter 2 Panel operation................................................................................................................4 2.1 Brief ................................................................................................................................... 4 2.2 Operation ............................................................................................................................4 2.2.1 Operate light with touch or KEY ...............................................................................4 2.2.2 Parameter value setting ..............................................................................................4 2.2.3 Boolean parameter setting ......................................................................................... 4 2.2.4 Sub MenuParameter .......................................................................................... 5 2.3 Operation and parameter instruction ................................................................................. 5 2.3.1 ADDR--> Address: Set DMX Address ......................................................................6 2.3.2 MODE--> WorkMode: Set Light work mode ........................................................... 6 2.3.3 DISP-->DISPLAY: Set display ..................................................................................7 2.3.4 TEST--> TestMode .................................................................................................... 7 2.3.5 ADVA-->Advanced: Set light run parameter ............................................................ 8 2.3.6 STAT-->Status: View status ....................................................................................... 9
Chapter 3 Channel description.......................................................................................................10 3.1 Channel table ................................................................................................................... 10

Chapter 1 Installation and attention
1.1 Maintenance
To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Intermittently using will extend this item's service life. Please clear the fan ,fan net , and optical lens in order to keep good work state. Do not use the alcohol or any other organic solvent to wipe the shell.
1.2 Statement
The product has perfect performance and integrity packing. All users should be strictly complying with the warning and operating instructions as stated. Or we aren't in charge of any result by misusing. Any damage resulting by misuse is not within the Company's warranty. Any fault or problem caused by neglecting the manual is also not in the charge of dealers.
Note: All information is subject to change without prior notice.
1.3 Safety Precaution
In order to guarantee the product's life, please don't put it in the damp places or even the environment over 60degress.
Always mount this unit in safe and stable matter. Install or dismantle should operate by professional engineer. Using lampthe change rate of power voltage should be within±10%If the voltage is too
highit will shorten the light's life; If it's not enough, will influence the effect. Please restart it 20 minutes later after turning off light , until full-cooling. Frequent switching
will reduce the life span of lamps and bulbs; intermittent using will improve the life of bulbs and lamps. In order to make sure the product is used well, please read the Manual carefully.
1.4 Product Instruction
lamp: MSD 230w/250w (life:2200 hours Color temperature: 8000K) Channel mode:16 DMX512 Channel Pan scan540°(16bit) Electric correction Tilt scan270° (16bit) Electric correction Amazing dot matix, four tact switch, 180° turning show Color wheel: one color wheel, 14 kinds of color chips in one color wheel Gobo: 14 gobos Effect Wheel: Rotation eight prism, effect move , frost 0-100% mechanical dimming, mechanical dimming and free dimming available. strobe macro control available. Lens optical system achanical fouce .beam angle 2°
Page 1

Over heat protection Power Input: 100-240V50/60Hz Power Dissipation350W IP level :IP20 Magnetic ballast and AC/Dc power supply Gross weight12kg Packing Size: 50X34.5X36.5CM
Net weight10.8KG 1.5 Cable connectionDMX
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24AWG,low capacity. Do not use microphone cable or other cable withcharacteristics differing from those specified. The end connections must be made using XLR type 3 or 5-pin male/female connectors. A terminating plugmust be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and3. IMPORTANT: Thewiresmustnot makecontact witheachotheror withthe metalcasing of theconnectors. The casing itself must be connected to the shield braid and to pin 1 of the connectors.
Figure 1 DMX Cable connection
1.6 Rigging (Optional)
This equipment can be positioned and fixed by clamp in every direction of the stage. Locking system makes it easy to fasten to the bracket. Attention! Two clamps is needed to fix the equipment. Every clamp is locked by fastener of 1/4 kind. Fastener can only be locked clockwise. Attention! Fasten a safety string to the additional hole of side aluminum piece. The secondary accessory can not hang on the delivery handle. Nip the equipment on bracket. Check if rigging clamp (not including the one inside) damaged or not? If stand ten times
weight as the equipment. Make sure the architecture can stand ten times weight as all the equipments, clamps, wirings and other additional fixtures. Screws for clamping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to clamp bracket, and then screw the nuts. Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the
Page 2

two levers by 1/4 rotating clockwise; then install another clamp. Install on safety string which stands at least ten times weight as equipment. Terminal of the
accessory is designed for clamps. Make sure pan/tilt lock unlocked or not. Keep the distance more than 1M from equipment to
flammable material or lighting source.
Figure 2 Installation
Page 3

Chapter 2 Panel operation
2.1 Brief
The light panel diagram show as Figure 3, Left area is TFT Displayer, support touch, and right area is KEY, both of touch and KEY can operate light and setting. Display & operation just like `Android operation system', touch the item will set or modify setting. Note: Prevent damage the touch or TFT displayer, Can not use sharp objects chick displayer.
Figure 3 Panel diagram
2.2 Operation
2.2.1 Operate light with touch or KEY The left area is TFT Displayer and touch, chick item or value with finger will to complete
operation of set light setting(parameters) or view light state. The area on the right hand side is 4 KEY, As auxiliary input interface, if disable touch
function,, the KEYr can been choose to set the parameter. 2.2.2 Parameter value setting When the selected item is value need to been modified, the dialog shown in Figure 4 will popup.
Figure 4 Dialog of value setting
Modify valueCan quickly modify value via pull the slider to the desired position, or click the button of `up' or `down' whit finger on the right side to set the exact desired value, another way is roll encoder on the right hand side of panel.
Apply valueWhen Value had been modified, Then press the bottom of `apply' in the left corner to apply to the light, but hav't saved
Save ValueAny time, click on the lower right corner of the "OK" button, the setting will been saved into internal memory. 2.2.3 Boolean parameter setting
when the selected parameters is a Boolean value (such as ON or OFF), can directly modify
Page 4

setting by chick corresponding item, the setting will been saved right now. When the parameter is a key item, chick corresponding item, a dialog shown in Figure 5 will
been popup ask for the confirm. Chick `sure' to confirm.
Figure 5 Dialog of confirm
2.2.4 Sub MenuParameter Chick item of main menu, enter corresponding sub menu, shown in Figure 6, total 6 sub menu, includes class of parameter and status: ADDRESSSet light DMX address. WORKMODSet light work mode, master or slave mode when in auto run mode. DISPLAY Set display parameter, eg. select language. TESTUsed for test light, modify DMX channel data to test function the corresponding
function of reference channel function table. ADVANCESet light running parameter. STATUSview light current status.
Figure 6 Parameter menu
2.3 Operation and parameter instruction
Via following operation, enter sub menu(parameter menu) shown in Figure 6 In main menu, chick 1/6 function button into corresponding parameter menu. In sub menu(page), chick main item on the left side of displayer, can shift to corresponding
sub menu(page) quickly.
Page 5

2.3.1 ADDR--> Address: Set DMX Address
Click and select the "ADDR", can enter the page of DMX address setting, range from 1 to 512, the address code shouldn't is not greater than (512- channels quantity), otherwise the light will not been controlled. Following is the operation:
Enter the page of DMX address, as shown in Figure 7, click the blank area in right side of display will pop-up diglog as in Fig. 4, modify value, then click `ENTER' to confirm and save DMX address code.

Figure 7 page of DMX Address
2.3.2 MODE--> WorkMode: Set Light work mode Enter the page of `WorkMode' as shown in Figure 8 and modify setting. Can set light work mode, control lamp and DMX channel mode.

Figure 8 page of work mode

DMX Ctrl:

Choose to set DMX Mode,

Auto Run:

Choose to set Auto Mode,

Sound Ctrl: Choose to set Sound Mode,

M/S Choose:Available just in `AUTO RUN' or `SOUND Ctrl' mode.

ON--> Master. (Data will be send to other slave lamp immediately.)

OFF--> Slaver.(NOT send data to other lamp via DMX Cable).(Default)

Light Switch:

ON--> Turn on the light,

OFF--> Turn off the light.

Channel Qty: Light support 2 DMX Channel mode: sample or extend

Simple --> 16CH.(Default)

Expand--> 20CH(or null).

Page 6

2.3.3 DISP-->DISPLAY: Set display
Light support 2 language, rotation display Enter page as shown in Figure9 to set parameter following:

Figure9 page of display
Language: English / . Screen Saver: when panel is idle(these is no operation in 10 second), displayer will enter saver status.
OFF--> No screen saver. Mode1--> Power-saving mode, turn off the display. Mode2--> Displays the current address. Mode3--> Displays the icon and the current working mode.(Default) Screen Rotion: To turning display. ON--> Normal display.(Default) OFF--> 180° turning display. Touch enableDisable or enable touch function,. ON--> Enable touch function.(Default) OFF--> Dosable touch function. Touch adjustAdjust touch function. Normally, not enter this item.
2.3.4 TEST--> TestMode
Enter the page as shown in Figure 10, Light will into test mode, in this mode, the light does not receive the data for DMX controller.:

PAN:

Figure 10 page of Test

range for 0 to 255;

Page 7

TILT: FOCUS: COLOR: GOBO: PRISM: FROST: STROBE:

range for 0 to 255; range for 0 to 255; range for 0 to 255; range for 0 to 255; range for 0 to 255; range for 0 to 255; range for 0 to 255;

2.3.5 ADVA-->Advanced: Set light run parameter

Enter the page as shown in Figure 10, set the parameter of light:

Figure 11 page of run parameter

Pan Invert: Reverse PAN move

OFF--> Pan Normal move.(Default)

ON--> Reverse PAN move.

Tilt Invert: Reverse TILT move

OFF--> Tilt Normal move.(Default)

ON--> Reverse Tilt move.

P/T Rectify: Disable or enable position rectify function.

OFF--> Disable P/T rectify

ON--> Enable P/T rectify-(Default)

Pan Offset:

Set PAN original position. Default: 10

Tilt Offset:

Set TILT original position. Default: 10

Lamp when:

PowerON--> Turn on the lamp when power on.(Default)

RstDone--> Turn on the lamp after reset.

Manual--> Manually turn on the lamp.

Data hold:

OFF--> When no DMX signal,return to middle position.(Default)

ON--> When no DMX signal,stop in the final position.

Factory Setting: Restore all parameter to factory setting.

Page 8

2.3.6 STAT-->Status: View status Enter the page as shown in Figure 12:

Figure 12 page of status

Work Mode: Address: Version: Elapse: Tatol:

Show the current working mode. Show the current address. Show the version of the lamp. Working hours after turn on. Cumulative hours of operation

When <Data hold> set <ON>,click to clear DMX data, and make the lamp return to themiddle position.
Click to reset.

Page 9

Chapter 3 Channel description

3.1 Channel table

Table 1 Channel brief

Channel 1

Name Color

Data
0-4 5-9 10-14 15-19 20-24 25-29 30-34 35-39 40-44 45-49 50-54 55-59 60-64
65-69 70-74 75-79 80-84 85-89 90-94 95-99 100-104 105-109 110-114 115-119 120-124 125-129 130-134 135-139 140-144 145-149 150-200 201-255

Introduce White White+Color1 Color1 Color1+Color2 Color2 Color2+Color3 Color3 Color3+Color4 Color4 Color4+Color5 Color5 Color5+Color6 Color6 Color6+Color7 Color7 Color7+Color8 Color8 Color8+Color9 Color9 Color9+Color10 Color10 Color10~Color11 Color11 Color11+Color12 Color12 Color12+Color13 Color13 Color13+Color14 Color14 Color14+White Forwards rainbow from fast to slow Backwards rainbow from slow to fast

Page 10

0-3

4-103 Fadeout slow to fast

104-107 Open

Strobe

108-207 Free Strobe slow to fast

208-212 Open

213-251 Pulse Strobe slow to fast

252-255 Open

Dimmer

0~255

Dimmer intensity from 0% to 100%

0-4

White

5-9

Gobo1

10-14 Gobo2

15-19 Gobo3

20-24 Gobo4

25-29 Gobo5

30-34 Gobo6

35-39 Gobo7

40-44 Gobo8

45-49 Gobo9

50-54 Gobo10

55-59 Gobo11

60-64 Gobo12

65-69 Gobo13

Gobo

70-125 Forwards rainbow from fast to slow

126-130 Stop

131-190 Backwards rainbow from slow to fast

191-195 Gobo1 ShakeSlow to fast

196-200 Gobo2 ShakeSlow to fast

201-205 Gobo3 ShakeSlow to fast

206-210 Gobo4 ShakeSlow to fast

216-220 Gobo6 ShakeSlow to fast

221-225 Gobo7 ShakeSlow to fast

226-230 Gobo8 ShakeSlow to fast

231-235 Gobo9 ShakeSlow to fast

236-240 Gobo10 ShakeSlow to fast

241-245 Gobo11 ShakeSlow to fast

246-250 Gobo12 ShakeSlow to fast

251-255 Gobo13 ShakeSlow to fast

0-127 Close Prism

Prism

128-255 Insert Prism

Prism.Rot 0-127 0~400 degree

Page 11

128-187 Forwards rainbow from fast to slow

188-195 Stop

196-255 Backwards rainbow from slow to fast

0-127

Colorful

128-255 Insert colorful

0~127

Frost

128~255 Insert frost

Zoom

0~255 Zoom Large to small

PAN

0~255 Pan movement by 540

PAN fine

0~255 Tilt movement by 270

TILT

0~255 Fine control of pan movement

TILT fine

0~255 Fine control of tilt movement

Macro Function

0~255 Close frost

100-105 Lamp Off (Over 3 seconds)

200-205 Lamp onOver 3 seconds

Reset

210-215 Reset XY(over 3 seconds)

220-235 Reset effect moto(over 3 seconds)

240-255 Reset all(over 3 seconds)

200-205 open

lamp open

26-100 Shut down

Led Strips

0-255 Led Strips Effect

Led Strips Speed

0-255 Slow to Fast

Page 12

Microsoft: Print To PDF