myFirst Camera Insta 2
Manual for Kids
Things to do before you start
Charge your camera
Charging time up to 2.5 hours.
[Image: The camera is shown connected to a charging cable.]
Insert a memory card
Storage support up to 32 GB.
[Image: A memory card is shown being inserted into the camera.]
Use the paper roll
Use the paper roll that is provided OR choose the right measurement of paper roll for your camera.
Paper roll specifications: DIAMETER no greater than 26mm, HEIGHT the same as 57mm.
Loading the paper roll
A: Place a roll of thermal paper into the holder like this [Image: Thermal paper roll loaded into the camera's paper holder].
OR
B: Place a roll of thermal sticker into the holder like this [Image: Thermal sticker roll loaded into the camera's paper holder].
Follow step by step. Please tick ✔️ when completing a task.
1. Power on
Press and hold the [power/shutter button] % to turn on the camera.
2. Take a photo
Press the big [shutter button] % to take a photo.
3. Gallery mode
Press the [gallery button] % to look at the photo you have just taken.
4. Camera mode
Press the [gallery button] % again to go back to the camera mode.
5. Take a video
Press and hold the big [shutter button] % to take your first video. Press it again to stop.
6. Video playback
Press the [gallery button] % to check your first video. Press the [play/pause button] % to start or stop playback.
7. Browse gallery
Press the [left/right navigation buttons] + or - to browse your other photos in the gallery.
8. Delete a photo/video you have just taken
Press the [menu button] % to pop up a menu. Use the [left/right navigation buttons] + and - to select whether you want to delete it.
Press the big [shutter button] % to confirm your selection.
9. Print a photo
In gallery mode, press the [print button] % to print the current photo.
10. Take a photo and print it out
Press the [gallery button] % to go back to the camera mode.
Press the [shutter button] % to take a photo, and it will be printed out automatically.
11. Take a selfie
Press the [selfie mode button] % to switch to the selfie lens.
Look at the screen, and press the big [shutter button] % to take a selfie.
OR
You can just press the [shutter button] % to take a selfie, and it will be printed out automatically.
12. Filters and templates
In the camera mode, press the [left/right navigation buttons] + or - to browse filters and templates.
Press the [burst shot button] % and take 3 photos continuously.
Press the [timer button] % and take a photo after 3 secs.
Press the [continuous shooting button] % to start taking a photo in every 3 seconds. Double click it to exit.
[Image: Icons representing Templates, Frames, Grids, and Filters are displayed.]
13. Set date and time for your camera
Go back to camera mode. Press the [menu button] % to pop up the setting menu.
Press the [down navigation button] - 2 times to move the selector to “Date and Time”.
Hit the big [shutter button] % to enter the submenu.
Use the [left/right navigation buttons] + and - to change the number or time display format.
Press the [next/confirm button] % to move to the next item, or press the [previous/cancel button] % to move to the previous item.
Hit the big [shutter button] % to save and exit the setting of “Date and Time”.
14. Other settings
Use the [up/down navigation buttons] + and - to move the selector up and down.
Press the big [shutter button] % to enter a submenu. Hit it again to save and exit the submenu.
OR
Press the [cancel button] % to leave a submenu without saving any change.
