Instruction Manual for Wellsons models including: ID801 In Drawer Power Point, ID801, In Drawer Power Point, Drawer Power Point, Power Point, Point

In-Drawer Power Point INSTALLATION INSTRUCTIONS v2

In-Drawer Power Point | Architectural Designer Products | ADP

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 519.79KB

Document Document

In-Drawer Power Point
Installation Instructions

INSTRUCTIONS

1/

Cut slot in back panel of drawer box measuring 106W x 40H x R20 (as specified in Figure A).

2/

Pull plug and cord through the front of the slot and fit main housing of power point into the

slot with the back of the face plate flush with the board.

3/

Screw into the board through the holes on either side of the face plate to secure powerpoint

(see Figure B).

ELECTRICAL INFORMATION
Input: 220~240V ac 50/60Hz 10A Output: USB-C + USB-A 5V/3A USB-C: 5V3A / 9V2A / 12V1.67A (20W Max) USB-C: 5V3A / 9V2A / 12V1.5A (20W Max) Typc-C + USB-A: 5V/3A Max:20W

WARNING
To reduce the risk of fire, electric shock, or injury:

1/

Use the unit indoors only.

2/

Do not use extension cord(s) to

connect the unit.

3/

Do not use product for connecting

devices over specified rating.

4/

Do not try to open unit for any

reason.

Figure A.

40

106

R20
Figure B.

VERSION 2 (08/2024)

MODEL: ID801