Instruction Manual for ITC models including: 69640-X-X Modular Nav Light, 69640-X-X, Modular Nav Light, Nav Light, Light

69640 Modular Navigation Light Install Instructions 1

Index of /files/resources/

Download Installation Instructions Here

Modular LED Navigation Light for Boats | ITC Shop Now


File Info : application/pdf, 1 Pages, 224.08KB

PDF preview unavailable. Download the PDF instead.

69640 Modular Navigation Light Install Instructions 1 ?v=1683297501
Modular Nav Light
Part#: 69640-X-X
PARTS/TOOLS NEEDED:

INSTALLATION INSTRUCTIONS

Navigation Light

Screws Bezel Mount Only
(not provided)

Power Drill
(not provided)

Marine Wire Connectors
(not provided)

INSTALLATION CONSIDERATIONS · Disconnect power before installing, adding or changing any component.
· To avoid a hazard to children, account for all parts and destroy all packing materials.
· It is recommended that fuse protection be added to the positive (+) input.
· All electrical connections should be made inside a watertight junction box. · *Visit https://www.uscgboating.org/regulations/navigation-rules.php for full navigation regulations.

Application Specific Sealant
(not provided)

Backnut No Bezel Version | Mounting angle must be on vertical surface and 56.25 degrees to meet coast guard requirements*

1. Drill a 7/8" hole in your mounting surface then feed the wires
through the pre-drilled hole.

2. Wire the light using the the wiring diagram. Use application
specific sealant around the light to prevent any ingress of
water. Screw on the back nut to the light until tight.

Screw Mount Bezel Version | Mounting angle must be on vertical surface and 56.25 degrees to meet coast guard requirements*

1. Drill a 7/8" hole in your mounting surface and predril screw
holes. Feed the wires through the pre-drilled 7/8" hole.

2. Wire the light using the the wiring diagram. Use application
specific sealant around the light to prevent any ingress of
water. Screw on the bezel.

Wiring DiagramWire the light based on the wiring diagram. Use silicone sealant around the light to prevent any ingress of water.

Incoming 12V - 24V DC
Power

Load (+) Neutral (-)

Fuse

Black (-)

Red (+)

Nav Light

3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355 itc-us.com

For warranty information please visit www.itc-us.com/warranty-return-policy DOC #: 710-00153 · Rev B · 12/14/22
Page 1 of 1



References

Adobe PDF Library 17.0 Adobe InDesign 18.0 (Windows)