RGB Control Sound-sensitive Music Atmosphere Lights
RGB Music Atmosphere Light adopts a unique design appearance, built-in 32 bright light beads, combined with a music special mic and a 32-bit ARM processor with a dominant frequency of 72M to realize the dynamic embodiment of music sound wave.
Features:
- Built-in Highly Sensitive Microphone (Voice Control)
- 32pcs RGB LED Beads
- More Than 8 Display Modes
- 5-level Brightness Adjustment
- 5-level Speed Adjustment
- Multiple Mode Selection
- Patented Intelligent De-Noising Algorithm, Suitable for Noisy Environment
- Two Styles to Choose: Plug-in Style, Built-in Battery Style (Optional)
- Built-in Large Capacity Battery (Optional)
Product Parameters:
- Input Voltage: DC 5V 1A
- Input Interface: Type-C USB
- Frequency Response: 100-16 KHz
- Optical Characteristics (Wavelength): Red: 620-625nm, Green: 520-525nm, Blue: 460-465nm
Instructions:
- POWER button: Long press for 3 seconds to turn on/off. Short press for Battery Style to display power; 4 green lights represent full power.
- MODE/SPEED button: Short press to switch dynamic mode.
- COLOR/BRIGHT button: Short press to switch colors.
- Press the POWER button 5 times to restore default settings (indicated by a green light on the full screen).
Precautions:
- Do not connect to a power supply higher than 5V to avoid damage to the motherboard. Please use a power supply device certified by the relevant agency.
- Do not immerse in water, or use under conditions that are moderately higher than 90%.
- Non-professionals should not disassemble the product by themselves.
- Do not use for children aged 6 and under.
APP name: Pickup lamp
Operational guidelines:
- Scan the QR code for app installation, or go to Google Play/App Store and search "Pickup lamp" to download.
- Turn on the "Pickup lamp" APP and enable Bluetooth.
- Connect the equipment:
Scan QR code to download APP
[QR Code Placeholder]
Note:
- When opening the APP for the first time, please grant permission requests.
- If an Android phone cannot search for Bluetooth, please ensure the location service is enabled.
Connection Steps:
- 3. connect equipment:
- Brightness adjustment
- Color Settings
- Function selection
- Speed regulation
- Sensitivity regulation
The app interface displays options for brightness adjustment, color settings, function selection, speed regulation, and sensitivity regulation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.