HEMNES Glass Top Assembly Instructions
Parts List
| Part Identifier | Quantity |
| 10003193 | 3x |
| 109560 | 3x |
Assembly Steps
Step 1
Place the glass top onto the assembled base unit. Ensure it is correctly aligned.
Secure the glass top using three (3) units of part number 10003193. These appear to be screws that go through pre-drilled holes in the base unit and into the underside of the glass top, or a securing mechanism attached to the glass top.
Step 2
Further secure the glass top using three (3) units of part number 109560. These are likely cam lock screws or similar fasteners that engage with corresponding fittings to firmly attach the glass top.
Important Notes
The diagram shows two types of screwdrivers are needed: one for Phillips head screws (marked with an 'X') and one for flathead screws (marked with a circle).
If you encounter difficulties during assembly, refer to the contact information provided by IKEA. The diagram shows a person looking confused with a hammer and parts, then on the phone with an IKEA store.
Ensure the unit is stable and properly assembled before use. The diagram shows a warning symbol indicating potential tipping if not secured, and a correct way to secure furniture to the wall.
