User Manual for PROAIM models including: P-BKST-01 Universal Backseat Monitor Control System for In-Car Rigging, P-BKST-01, Universal Backseat Monitor Control System for In-Car Rigging, In-Car Rigging, Backseat Monitor Control System, Monitor Control System, Control System
User Manual
Proaim Universal Backseat Monitor Control System for In-Car Rigging
1 Universal Backseat Monitor Control System for In-Car Rigging (P-BKST-01) Assembly Manual What's In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. 1 x Universal Headrest Mount 1 x Round Cheese Plate 2 x Rigging Rod 250mm 2 x Rigging Rod 180mm 4 x Rigging Rod Clamp 2 x Standoff Pins 2 x 360° Houdini Rod Clamp Added 2 x Allen keys 7/32, 5/16mm & 4 x O Rings Black (8x14x3) 1 x Allen key 3/16mm All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher. 2 Universal Backseat Setup Attach the Universal headrest mount on the back seat of the vehicle, as shown in the image. After attaching the headrest, insert a bolt to secure it properly. After inserting the bolt, properly secure the headrest on the backseat with the help of the Allen key, and same step is to be followed on the other side as well, as shown in the image. Insert two Standoff pins into the Universal headrest mount by matching them with the threads of the Universal headrest, as shown in the image. Attach the round cheese plate properly by matching it with the threads of two standoff pins, and then insert the allen bolt. Tighten the Allen bolt with the help of the Allen key, and then insert the rigging rod clamp into the round cheese plate by matching it with the threads of the round cheese plate. 3 On the other side, follow the same procedure as for the rigging rod clamp. Note: Easily attach the headrest mount with cheese plate which has multiple threads & holes for quick & easy mounting. Insert 2 x Rigging Rod (180mm) into the Rigging rod clamp and tighten them with the help of the allen key. Now insert the 360° Houdini Rod Clamp into the Rigging Rod (180mm) and secure it properly with the help of the Allen key and then insert the Rigging Rod (250mm) into it. After inserting the Rigging rod (250mm), tighten it properly with the help of the Allen key. Note: It is entirely modular & adjustable. You just need to set your control device, monitor, LCD, wheels, and joysticks behind the front seat in any desired position and focus only on your creative cinematic shots. 4 YOUR PROAIM UNIVERSAL BACKSEAT MONITOR CONTROL SYSTEM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn't cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.Microsoft Publisher 2013 Microsoft Publisher 2013