Professional Video Production Equipment for Sale | Ikan
User Guide for Ikan models including: PT4500 15 Inch Teleprompter Tripod and Dolly Turnkey, PT4500, 15 Inch Teleprompter Tripod and Dolly Turnkey, Tripod and Dolly Turnkey, Dolly Turnkey
Extend the teleprompter hood open and attach teleprompter boot using the clips. It is suggested to align the seam with the bottom of the teleprompter hood.
File Info : application/pdf, 21 Pages, 6.69MB
DocumentDocumentPT4500-TRIPOD
15" Teleprompter, Tripod & Dolly Turnkey
Quick Start Guide
OVERVIEW
Ikan's Turnkey Broadcast Solutions include everything you need for your professional camera setup. This solution includes a 15" teleprompter, tripod, and dolly. All of our systems have been tested internally for payload compatibility. The remaining payload capacity, after mounting the full 15" teleprompter system without the counterweight, can accommodate camera setups up to 25.2 lbs. The tripod, without the teleprompter system, can accommodate cameras up to 44.1 lbs. This solution also includes a carrying bag for the tripod.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
PT4500
15" High Bright Beam Splitter Teleprompter
What's Included
1 x Teleprompter Base 1 x Bracket with Glass 1 x Teleprompter Hood with Boot 1 x Monitor 1 x AC Adapter with Cord 1 x PrompterPro Software 1 x Counterweight Set (2 x 2.5 lbs) 2 x D-Ring ¼-20" Screws 2 x Hex Keys 3 x Different Height Risers
Teleprompter Assmebly Setup
Step 1
Place the teleprompter glass frame on a flat surface and remove the four screws as shown.
Step 2
Align and attach the teleprompter hood with the 8 screw pegs from the teleprompter frame.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Step 3
The metal frame is directional. Make sure the thicker side is on top and the slimmer side is on the bottom.
Step 4
Put the washers on before tightening the screws. The washers and 4 additional screws are inside a bag on the bottom foam.
Step 5
Extend the teleprompter hood open and attach teleprompter boot using the clips. It is suggested to align the seam with the bottom of the teleprompter hood.
Step 6
Remove the monitor mounts from the teleprompter base using the included larger 4mm hex key to loosen from the 15mm rods.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
AV VGA
HDMI 12-24V
Step 7
Attach the monitor mounts on the back of the monitor's VESA compatible threads using the 4 included screws and provided 2mm hex key.
Step 8
After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket. Make sure the 15mm rods go through both set of monitor mounts. Please ensure that all screws are properly tightened after inserting the monitor. *SAFETY NOTE* Make sure to leave at least 2 inches of the rods inside the teleprompter base.
Teleprompter Base www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Step 9
While sliding the teleprompter bracket into the slot of the teleprompter base pull on the red knob to allow the bracket to fully slide in.
Step 10
Once the bracket is in place, tighten the side screw to lock in place. Double check and make sure all the screws are tightened with the included hex keys.
Step 11 (optional)
Should the teleprompter be too front heavy, you can attach the included counter weight on the back of the teleprompter base.
Foam Case
To make your teleprompter more portable, we packed it in a reusable, high-quality foam. The shape and size of the foam was designed to fit into Ikan's PT-CASE-V2.
** DO NOT THROW AWAY FOAM CASE **
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Monitor Ports
HDMI
BNC AV Composite Input VGA Video Graphics Array DE15 Connection HDMI High-Definition Multimedia Interface Input Connection Power Port 12-24v Input
HDMI Switch HDMI input VGA Switch to VGA input AV Switch to composite BNC input Flip Toggle image flip
(Can be set to horizontal, vertical, or both via menu) Up Arrow Toggle up to adjust setting Menu Access to monitor settings Down Arrow Toggle down to adjust setting
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Monitor Menu Settings
Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGB Setup Manually configure RGB Return
System Config Menu Duration Set duration of how long menu stays on screen Video Ratio Set screen aspect ratio 16:9 or 4:3 (4:3 is native resolution, 16:9 will create black bars) Flip-H Assign toggle button to flip image horizontally Flip-V Assign toggle button to flip image vertically Reset Factory reset Return
PC Setup (Only available for VGA) H-Position Adjust horizontal position V-Position Adjust vertical position Auto Monitor automatically adjust position Return
Exit
How to set-up FLIP button feature:
1. Press MENU button 2. Navigate to SYSTEM CONFIG. 3. Navigate to FLIP-V or FLIP-H 4. Change FLIP-V and/or FLIP-H to "ON" 5. Exit MENU 6. The FLIP button should now be activated and can be
pressed to mirror the image Horizontally or Vertically 7. When FLIP-H is ON, the image will flip Horizontally 8. When FLIP-V is ON, the image will flip Vertically 9. If both are ON, the FLIP button will toggle both
Horizontal and Vertical flip
Watch our VIDEO TUTORIAL on how to assemble Ikan Professional Telepromopters:
https://youtu.be/5TjIxzBc_Vc
Specifications
PT4500
Aspect Ratio Backlight Brightness Build Material Diagonal Input Signal Input Voltage Power Consumption Reading Range Resolution Viewing Angle Weight Shipping Weight Shipping Dimensions
4:3 LED 1000 nits Aluminum 15" Composite BNC, VGA, HDMI DC 12v / 4A 10W 17' 1920 x 1080 160° (H) / 170° (V) 22 lb 28 lb 25 x 20 x 15.5 in
Optional Accessories
PT4500-G PT15-HB-V2 PT17-HB-V2 PT-CASE-V2
Replacement Glass for both PT4500 / PT4700 15" High Bright Monitor (for PT4500) 17" High Bright Monitor (for PT4700) Rolling Hard Case for PT4500/PT4700 Teleprompter
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Learn More
More dynamic information at official website: www.ikancorp.com
Support
Contact email: support@ikancorp.com
CONDITIONS OF WARRANTY SERVICE
· Free service for one year from the day of purchase if the problem is caused by manufacturing errors. · The components and maintenance service fee will be charged if the warranty period is expired. Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.) · Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company. · Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2022 Ikan International. All rights reserved. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
GA102 100mm Aluminum Video Tripod
The GA102 two stage aluminum tripod supports a payload weighing up to 132 lbs. It is made of lightweight aluminum, has a 100mm bowl, and the legs are a twin tube design with two stages. The tripod can be adjusted to a maximum height of 63" and a minimum height of 18" with a folded length of 29". The mono-lock feature allows for quick height adjustments of both stages with one twist. An adjustable floor spreader provides extra security and stability.
100mm
160.0cm 63.0in
47.0cm 18.5in
74.0cm 29.1in
60.0kg
5.1kg
Aluminum
3
132.0lbs
11.2lbs
2-stages With Mono-lock Patent Design
Mono-lock design allows you to lock and unlock the three sections of each leg using only one locking lever quicker than normal.
1 Lock 2
Mono-Lock Design
One lock for one section
One lock for one section
FEATURES
100mm
100mm Bowl Size
Compatible with all professional 100mm half-ball video heads.
Extendable Ground Spreader
Extendable spreader is designed to offer added stability to the tripod.
Removable Rubber Feet
Removable feet attach to the spiked feet for working on delicate or hard surfaces.
GH20 100mm Fluid Head
FEATURES
100mm 20.0kg 44.0lbs
0-8
212mm/8.3in 73mm/2.9in 175mm/6.9in
Fixed drag of pan & tilt
Longer sliding plate
SPECIFICATIONS
Model Payload Range Counterbalance Range Grades Of Pan Drag Grades Of Tilt Drag Tilt Range Temperature Range Bowl Size Net Weight
Leveling bubble
GH20 20.0kg / 44.0lbs 0-8 Fixed Fixed -60°/+90° -30~+60 100mm 3.5kg / 7.7lbs
8 plus 0 steps of counterbalance
GA101 100mm 140.5cm / 55.3in 63.5cm / 25.0in 85.0cm / 25.0in 60.0kg / 132.0lbs 4.5kg / 9.9lbs Aluminum 2
Packing
EG20A (GH20+GA101) 20.0kg / 44.0lbs 156.0cm / 61.4in 79.0cm / 31.1in 100.5cm / 39.6in 8.4kg / 18.5lbs 100mm T30