StarTech Sit-Stand Desktop Workstation Instruction Manual

Instruction Manual for StarTech models including: Sit-Stand Desktop Workstation, ARMSTSLG, ARMSTSCORNR

Sit-Stand Workstation

Manual Revision: 04/29/2021 For the latest information, technical specifications, and support for this product, please visit ... operating instructions and heed any precautions provided. Before operating the lever or handle, understand the motion created by the spring mechanism

Manual Revision: 04/29/2021 For the latest information, technical specifications, and support for this product, please visit ... This manual may make reference to ...

Instruction Manual ii • Arbetsstationens viktkapacitet: 12,7 kg (28 lb.) • Tangentbordslådans viktkapacitet: 2,3 kg (5 lb.) • Låt inte barn klättra på produkten eller använda produkten utan uppsikt.

File Info : application/pdf, 26 Pages, 1.28MB

1069510318

Sit-Stand Desktop Workstation
ARMSTSLG ARMSTSCORNR
ARMSTSLG *actual product may vary from photos
FR: Guide de l'utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l'uso - it.startech.com
For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/ARMSTSLG or www.StarTech.com/ARMSTSCORNR
Manual Revision: 04/29/2021

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries. This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Instruction manual

Warning Statements
· Assemble this product according to the instructions. · Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product. · Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage. · Weight capacity of the workstation: 12.7 kg (28 lb.) · Weight capacity of the keyboard tray: 2.3 kg (5 lb.) · Do not allow children to climb on this product, or use this product without
proper supervision. · This product is intended for indoor use only and should not be used
outdoors. · Do not over-tighten the screws. If any resistance is encountered, stop
tightening. · Never operate this product if parts are missing or damaged. · Ensure the desk or mounting surface for this product can support the
combined weight of the workstation and the mounted equipment. Failure to do so may result in property damage and/or personal injury. · When lowering or raising the workstation, ensure the mounted equipment is properly secured or supported and the speed is slow enough to prevent any equipment instability. Failure to do so may result in property damage and/or personal injury. · Ensure all equipment cables are of adequate length for the highest workstation position. Failure to do so may result in property damage and/or personal injury. · Tipping Hazard! This product is freestanding and therefore prone to tipping if mishandled or overloaded. Exercise caution when moving, loading, unloading and adjusting the product. Failure to do so could result in equipment damage and/or personal injury. · Stored Energy Hazard! This product contains a spring mechanism which can cause the assembly and/or mounted equipment to move forcibly, and quickly, when released via the actuating lever or handle. Read and follow the operating instructions and heed any precautions provided. Before operating the lever or handle, understand the motion created by the spring mechanism and always exercise caution. Failure to do so may result in property damage and/or serious personal injury. · Pinch hazard! Keep your fingers clear from moving components when you
Vamronveinthegwsormkstaetiodn dupeorldaownnden
· Se till att du monterar produkten i enlighet med instruktionerna. · Läs hela manualen och se till att du förstår instruktionerna innan du börjar
montera och använda produkten. · Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom.
Instruction manual i

· Arbetsstationens viktkapacitet: 12,7 kg (28 lb.) · Tangentbordslådans viktkapacitet: 2,3 kg (5 lb.) · Låt inte barn klättra på produkten eller använda produkten utan uppsikt. · Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus. · Dra inte åt skruvarna för hårt när du monterar produkten. Om du måste ta i
när du skruvar åt kan du sluta skruva åt. · Använd aldrig produkten om delar saknas eller är skadade. · Se till att skrivbordet eller monteringsytan kan bära den kombinerade vikten
av den här produkten och den monterade utrustningen. Om du inte gör det kan det leda till egendomsskador och/eller personskador. · När du sänker eller höjer arbetsstationen ska du se till att den monterade utrustningen är ordentligt säkrad eller stöds och att hastigheten är tillräckligt långsam för att förhindra att utrustningen blir instabil. Underlåtenhet att göra detta kan leda till egendomsskador och/eller personskador. · Se till att alla utrustningskablar har tillräcklig längd för den högsta arbetsstationens/displayens läge. Om detta inte görs kan det leda till egendomsskador och/eller personskador. · Tippningsrisk! Denna produkt är fristående och kan därför tippas om den hanteras felaktigt eller överbelastas. Var försiktig när du flyttar, lastar, lossar och justerar produkten. Underlåtenhet att göra det kan leda till skador på utrustningen och / eller personskada. · Risk för lagrad energi! Denna produkt innehåller en fjädermekanism som kan leda till att monteringskomponenterna och/eller displayen rör sig kraftigt och snabbt uppåt när den aktiveras. Följ de medföljande instruktionerna och var alltid försiktig när du aktiverar handtaget. Använd inte handtaget före steg 4 i installationsförfarandet. När du justerar displayens höjd ska du alltid stödja eller hantera displayen med båda händerna (som på bilden) för att på ett säkert sätt kontrollera höjningen eller sänkningen av displayen. Underlåtenhet att göra detta kan leda till egendomsskador och/eller allvarliga personskador. · Klämrisk! Håll fingrarna borta från rörliga komponenter när du flyttar
Waarbaertssstcathionuenwupipnelglerenenr.
· Zorg dat u dit product volgens de instructies in elkaar zet. · Lees de gehele handleiding en zorg dat u de instructies begrijpt voordat u dit
product in elkaar zet en gebruikt. · Overschrijd de maximale capaciteit van dit product niet. Overbelasting van
dit product kan letsel of materiële schade veroorzaken. · Draagvermogen werkstation: 12,7 kg (28 lbs.) · Gewichtscapaciteit van de toetsenbordhouder: 2,3 kg (5 lb.) · Geef kinderen geen toestemming om op dit apparaat te klimmen of dit
product zonder goed toezicht te gebruiken. · Dit product is alleen bedoeld voor binnengebruik en mag niet buiten
Instruction Manual ii

worden gebruikt. · Draai de schroeven niet te strak vast wanneer u dit product in elkaar zet. Als
u weerstand voelt tijdens het vastdraaien van de schroeven, stop dan. · Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn. · Zorg ervoor dat het bureau of het montageoppervlak het gecombineerde
gewicht van dit product en de gemonteerde apparatuur kan dragen. Doet u dit niet, dan kan dit leiden tot materiële schade en/of persoonlijk letsel. · Wanneer u het werkstation laat zakken of optilt, moet u ervoor zorgen dat de gemonteerde apparatuur goed vastzit of ondersteund wordt en dat de snelheid laag genoeg is om te voorkomen dat de apparatuur instabiel wordt. Doet u dit niet, dan kan dit leiden tot materiële schade en/of persoonlijk letsel. · Zorg ervoor dat alle kabels van de apparatuur voldoende lang zijn voor de hoogste positie van het werkstation/beeldscherm. Doet u dit niet, dan kan dit leiden tot materiële schade en/of persoonlijk letsel. · Kantelgevaar! Dit product is vrijstaand en kan daarom kantelen bij verkeerde behandeling of overbelasting. Wees voorzichtig bij het verplaatsen, laden, lossen en aanpassen van het product. Als u dit niet doet, kan dit leiden tot schade aan de apparatuur en / of persoonlijk letsel. · Gevaar door opgeslagen energie! Dit product bevat een veermechanisme dat ertoe kan leiden dat de montageonderdelen en/of het display bij bediening met kracht en snel omhoog bewegen. Volg de bijgeleverde instructies en wees altijd voorzichtig bij het bedienen van de hendel. Bedien de hendel niet vóór stap 4 van de installatieprocedure. Wanneer u het scherm in hoogte verstelt, moet u het scherm altijd met beide handen ondersteunen of vastpakken (zoals afgebeeld) om het scherm veilig omhoog of omlaag te kunnen bewegen. Doet u dit niet, dan kan dit leiden tot materiële schade en/of ernstig persoonlijk letsel. · Gevaar voor beknelling! Houd uw vingers weg van de bewegende onderdelen als u uw werkstation naar boven of beneden beweegt.
· · · · 12.7 kg28 · 2.3 kg5 · · · ·
Instruction Manual iii

·
·
·
·
· ! 4
· !
Dichiarazioni di avvertenza
· Assicurarsi di Assemblare il prodotto secondo le istruzioni. · Leggere l'intero manuale e assicurarsi di aver compreso tutte le istruzioni
prima di iniziare ad assemblare e a utilizzare questo prodotto. · Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni. · Capacità di peso della workstation: 12,7 kg (28 lb.) · Capacità di peso del vassoio della tastiera: 2,3 kg (5 lb.) · Non consentire ai bambini di arrampicarsi sul prodotto o di utilizzarlo senza
un'adeguata supervisione. · Il prodotto è destinato all'uso in ambienti interni. Se ne sconsiglia l'impiego
in ambienti esterni. · Durante l'assemblaggio del prodotto, non stringere troppo le viti. Se si
incontra resistenza mentre si stringono le viti, interrompere l'operazione. · Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay
daños en las mismas. · Assicurarsi che la scrivania o la superficie di montaggio possano sostenere
il peso combinato di questo prodotto e dell'attrezzatura montata su di esso. In caso contrario si potrebbero verificare danni alla proprietà e/o lesioni personali. · Quando si abbassa o si solleva la postazione di lavoro, assicurarsi che l'attrezzatura montata sia adeguatamente fissata o sostenuta e che la velocità
Instruction Manual iv

sia sufficientemente bassa da evitare qualsiasi instabilità dell'attrezzatura. In caso contrario, potrebbero verificarsi danni alla proprietà e/o lesioni personali. · Assicurarsi che tutti i cavi dell'attrezzatura siano di lunghezza adeguata per la posizione più alta della stazione di lavoro/display. In caso contrario, si potrebbero verificare danni alla proprietà e/o lesioni personali. · Rischio di ribaltamento! Questo prodotto è indipendente e quindi incline a ribaltarsi se maneggiato in modo improprio o sovraccarico. Prestare attenzione durante lo spostamento, il caricamento, lo scaricamento e la regolazione del prodotto. In caso contrario, potrebbero verificarsi danni alle apparecchiature e / o lesioni personali. · Pericolo di energia immagazzinata! Questo prodotto contiene un meccanismo a molla che può far sì che i componenti del dispositivo e/o il display si muovano forzatamente e rapidamente verso l'alto quando vengono azionati. Seguire le istruzioni fornite e prestare sempre attenzione quando si aziona la maniglia. Non azionare la maniglia prima del passo 4 della procedura di installazione. Quando si regola l'altezza del display, reggere o maneggiare sempre il display con entrambe le mani (come mostrato) per controllare in sicurezza il sollevamento o l'abbassamento del display. In caso contrario, si potrebbero verificare danni alla proprietà e/o gravi lesioni personali. · Pericolo di Schiacciamento! Tenere lontane le dita da parti in movimento
Avertissements quando si è in fase di regolazione della stazione di lavoro.
· Assemblez ce produit conformément aux instructions. · Lisez tout le manuel et assurez-vous que vous comprenez les instructions
avant de commencer à assembler et utiliser ce produit. · Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels. · Capacité de poids de la station de travail: 12.7 kg (28 lb) · Capacité de poids du plateau de clavier: 2,3 kg (5 lb) · N'autorisez pas les enfants à grimper sur ce produit ni à l'utiliser sans
surveillance. · Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l'extérieur. · Ne serrez pas trop les vis lors de l'assemblage de ce produit. Si vous
rencontrez une résistance lors du serrage des vis, cessez de serrer. · N'utilisez pas ce produit si des pièces sont endommagées ou manquantes. · Assurez-vous que le bureau ou la surface de montage peut supporter le
poids combiné de ce produit et de l'équipement monté. Le non-respect de cette consigne peut entraîner des dommages matériels et/ou des blessures corporelles. · Lors de la descente ou de la montée du poste de travail, assurez-vous que l'équipement monté est correctement fixé ou soutenu et que la vitesse est suffisamment lente pour éviter toute instabilité de l'équipement. Le non-
Instruction Manual v

respect de cette consigne peut entraîner des dommages matériels et/ou corporels. · Assurez-vous que tous les câbles de l'équipement sont d'une longueur adéquate pour la position la plus élevée du poste de travail/de l'écran. Le non-respect de cette consigne peut entraîner des dommages matériels et/ ou corporels. · Risque de basculement! Ce produit est autonome et donc enclin à basculer s'il est mal manipulé ou surchargé. Faites preuve de prudence lors du déplacement, du chargement, du déchargement et du réglage du produit. Le non-respect de cette consigne peut entraîner des dommages matériels et / ou des blessures corporelles. · Danger lié à l'énergie stockée ! Ce produit contient un mécanisme à ressort qui peut entraîner le déplacement forcé et rapide des composants de l'assemblage et/ou de l'écran vers le haut lorsqu'il est actionné. Suivez les instructions fournies et faites toujours preuve de prudence lorsque vous actionnez la poignée. N'actionnez pas la poignée avant l'étape 4 de la procédure d'installation. Lorsque vous réglez la hauteur de l'écran, soutenez ou manipulez toujours l'écran avec les deux mains (comme indiqué) pour contrôler en toute sécurité la montée ou la descente de l'écran. Le nonrespect de cette consigne peut entraîner des dommages matériels et/ou des blessures corporelles graves. · Risque de pincement ! Ne pas approcher les doigts des composants mobiles
Mensagens de aviso quand vous levez ou abaissez le poste de travail.
· Certifique-se de que monta este produto de acordo com as instruções. · Leia todo o manual e certifique-se de que entende as instruções antes de
começar a montar e a utilizar este produto. · Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade. · Capacidade de peso da estação de trabalho: 12.7 kg (28 lb.) · Capacidade de peso da bandeja do teclado: 2,3 kg (5 lb.) · Não deixar as crianças trepar neste produto ou utilizar este produto sem a
devida supervisão. · Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior. · Quando montar este produto, não aperte demasiado os parafusos. Se
encontrar resistência enquanto aperta os parafusos, pare de apertar. · Nunca opere este produto se faltarem peças ou estas estiverem danificadas. · Assegura que a mesa ou a superfície de montagem pode suportar o peso
combinado deste produto e do equipamento montado. Não o fazer pode resultar em danos materiais e/ou ferimentos pessoais graves. · Ao baixar ou subir o posto de trabalho, assegurar que o equipamento montado está devidamente fixado ou suportado e que a velocidade é suficientemente lenta para evitar qualquer instabilidade do equipamento. Não o fazer pode resultar em danos materiais e/ou ferimentos pessoais.
Instruction Manual vi

· Assegur que todos os cabos do equipamento têm o comprimento adequado para a posição mais alta do posto de trabalho/posição do visor. Não o fazer pode resultar em danos materiais e/ou ferimentos pessoais.
· Derrubando o perigo! Este produto é independente e, portanto, sujeito a tombar se for manuseado incorretamente ou sobrecarregado. Tenha cuidado ao mover, carregar, descarregar e ajustar o produto. Não fazer isso pode resultar em danos ao equipamento e / ou ferimentos pessoais
· Perigo de Energia Armazenada! Este produto contém um mecanismo de mola que pode resultar na movimentação forçada e rápida dos componentes de montagem e/ou visor para cima quando accionado. Siga as instruções fornecidas e tenha sempre cuidado ao accionar o manípulo. Não accionar a pega antes do passo 4 do procedimento de instalação. Ao ajustar a altura do visor, apoi sempre o visor com ambas as mãos (como illustrado) para controlar com segurança a subida ou descida do visor. Não o fazer pode resultar em danos materiais e/ou ferimentos pessoais graves.
· Risco de dedos trilhados! Mantenha os dedos afastados dos componentes
Advertencias de uso em movimento quando move a estação de trabalho para cima ou para baixo.
· Asegúrese de ensamblar este producto según las instrucciones. · Lea todo el manual y asegúrese de haber comprendido bien las instrucciones
antes de proceder con el ensamblaje y el uso de este producto. · Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la propiedad. · Capacidad de peso de la estación de trabajo: 12.7 kg (28 lb) · Capacidad de peso de la bandeja del teclado: 2,3 kg (5 lb) · No permita que los niños se suban a este producto o que lo utilicen sin la debida supervisión de un adulto. · El uso de este producto es solo para interiores y no debe utilizarse en exteriores. · Cuando ensamble este producto, no apriete los tornillos más de lo debido. Si al apretar los tornillos siente resistencia, no los apriete más. · Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay daños en las mismas. · Asegúrese de que el escritorio o la superficie de montaje pueda soportar el peso combinado de este producto y del equipo montado. Si no lo hace, puede provocar daños materiales y/o lesiones personales. · Cuando baje o suba la estación de trabajo, asegúrese de que el equipo montado esté bien asegurado o apoyado y que la velocidad sea lo suficientemente lenta como para evitar que el equipo pueda caerse. Si no lo hace, puede provocar daños materiales y/o personales. · Asegúrese de que todos los cables de los equipos tengan la longitud adecuada para la posición más alta de la estación de trabajo o pantalla. Si no lo hace, puede provocar daños materiales y/o lesiones personales.
Instruction Manual vii

· ¡Peligro de vuelco! Este producto es independiente y, por lo tanto, propenso a volcarse si se manipula incorrectamente o se sobrecarga. Tenga cuidado al mover, cargar, descargar y ajustar el producto. El no hacerlo podría resultar en daños al equipo y / o lesiones personales.
· ¡Peligro de Energía Almacenada! Este producto contiene un mecanismo de resorte que puede hacer que los componentes del conjunto y/o la pantalla se muevan rápidamente con fuerza hacia arriba al ser accionados. Siga las instrucciones proporcionadas y tenga siempre precaución al accionar la manija. No la accione antes del paso 4 del procedimiento de instalación. Cuando ajuste la altura de la pantalla, sujete o sosténgala siempre con ambas manos (como se muestra) para controlar con seguridad la subida o bajada de la misma. Si no lo hace, puede provocar daños materiales y/o lesiones personales graves.
· ¡Peligro de Aplastamiento! Mantenga sus dedos alejados de las partes
Warnhinweise móviles al desplazar la estación de trabajo hacia arriba o hacia abajo.
· Beachten Sie bei der Montage dieses Produkts die Montageanweisungen. · Bevor Sie dieses Produkt montieren und verwenden, lesen Sie das gesamte
Handbuch und vergewissern Sie sich, dass Sie die Anweisungen verstanden haben. · Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen. · Gewichtskapazität der Workstation: 12,7 kg (28 lb.) · Gewichtskapazität der Tastaturablage: 2,3 kg (5 lb.) · Gestatten Sie Kindern nicht, auf das Produkt zu klettern oder das Produkt ohne Aufsicht zu benutzen. · Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte nicht im Freien verwendet werden. · Achten Sie bei der Montage des Produkts darauf, die Schrauben nicht zu fest anzuziehen. Sobald Sie beim Anziehen der Schrauben auf Widerstand stoßen, stellen Sie das Anziehen ein. · Das Produkt darf nicht bedient werden, wenn Teile fehlen oder beschädigt sind. · Stellen Sie sicher, dass der Tisch oder die Montagefläche das kombinierte Gewicht dieses Produkts und der montierten Geräte tragen kann. Andernfalls kann es zu Sach- und/oder Personenschäden kommen. · Stellen Sie beim Absenken oder Anheben der Workstation sicher, dass die montierte Ausrüstung ordnungsgemäß gesichert oder abgestützt ist und die Geschwindigkeit langsam genug ist, um eine Instabilität der Ausrüstung zu verhindern. Bei Nichtbeachtung kann es zu Sach- und/oder Personenschäden kommen. · Vergewissern Sie sich, dass alle Gerätekabel eine ausreichende Länge für die höchste Position der Workstation/des Displays haben. Andernfalls kann es zu Sach- und/oder Personenschäden kommen.
Instruction Manual viii

· Kippgefahr! Dieses Produkt ist freistehend und neigt daher bei falscher Handhabung oder Überlastung zum Umkippen. Seien Sie vorsichtig, wenn Sie das Produkt bewegen, laden, entladen und einstellen. Andernfalls kann es zu Geräteschäden und / oder Verletzungen kommen.
· Gefahr durch gespeicherte Energie! Dieses Produkt enthält einen Federmechanismus, der dazu führen kann, dass sich die Montagekomponenten und/oder das Display bei Betätigung gewaltsam und schnell nach oben bewegen. Befolgen Sie die mitgelieferten Anweisungen und lassen Sie bei der Betätigung des Griffs stets Vorsicht walten. Betätigen Sie den Griff nicht vor Schritt 4 des Installationsvorgangs. Stützen oder fassen Sie das Display beim Verstellen der Höhe immer mit beiden Händen an (wie abgebildet), um das Anheben oder Absenken des Displays sicher zu steuern. Andernfalls kann es zu Sachschäden und/oder schweren Personenschäden kommen.
· Einklemmgefahr! Halten Sie Ihre Finger fern von beweglichen Teilen wenn Sie die Arbeitsstation hoch und runter Bewegen.
Instruction Manual ix

Table of Contents
Warning Statements ..............................................................................i Product dimensions...............................................................................1
ARMSTSLG.................................................................................................................................................... 1 Weight capacity ......................................................................................................................................... 2 ARMSTSCORNR .......................................................................................................................................... 3 Weight capacity ......................................................................................................................................... 4
Package contents ...................................................................................5 Requirements .........................................................................................5 Raise or lower the Workstation ............................................................6 Adding equipment to the Workstation...............................................7
Place free-standing equipment onto the Workstation................................................................ 7 Clamp equipment to the grommet hole.......................................................................................... 9
Adjust the tension of the Workstation................................................10 Reposition the keyboard tray...............................................................11
Warranty Information .............................................................................................................................. 13 Limitation of Liability............................................................................................................................... 13
Instruction manual

Product dimensions
ARMSTSLG
160 mm (6.3")
22 mm (0.9")
15 mm (0.6")
15 mm (0.6")

560 mm (22.0")
422 mm (16.6")

Instruction manual 1

703 mm 530 mm (27.6") (20.9")

173 mm (6.8")

130 mm (5.1")

Weight capacity

900 mm (35.4")
50 mm (1.9") Diameter 60 mm (2.4")
680 mm (26.8")

666 mm (26.2")
265 mm (10.4")

0 to 12.7 kg (0 to 28 lb.)
0 to 2.3 kg (0 to 5 lb.)

Instruction manual 2

ARMSTSCORNR
113 mm (4.4")

155 mm (6.1")

452 mm (17.8")

585 mm (23")

Instruction Manual 3

667 mm 530 mm (26.3") (20.9")

1135 mm (44.7")
449.66 mm (17.7")

50 mm (1.97")

60 mm (2.4")

128 mm (5")

680 mm (26.8")

Weight capacity

640 mm (25.2")

0 to 12.7 kg (0 to 28 lb.)
0 to 2.3 kg (0 to 5 lb.)

Instruction Manual 4

Package contents
· 1 x sit-to-stand workstation · 1 x small hex key · 1 x large hex key · 1 x clamp plate · 1 x M10 x 50 mm bolt · 1 x ³/ - 16 x 50 mm bolt · 1 x instruction manual
Requirements
· 1 x wrench (if you use the grommet hole to mount your equipment) Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/ARMSTSLG -- or -www.StarTech.com/ARMSTSCORNR.
Instruction manual 5

Raise or lower the Workstation
Stored Energy Hazard! This product contains a spring mechanism which can cause the assembly and/or mounted equipment to move forcibly, and quickly, when released via the actuating lever or handle. Read and follow the operating instructions and heed any precautions provided. Before operating the lever or handle, understand the motion created by the spring mechanism and always exercise caution. Failure to do so may result in property damage and/or serious personal injury.
Tipping Hazard! This product is freestanding and therefore prone to tipping if mishandled or overloaded. Exercise caution when moving, loading, unloading and adjusting the workstation. Failure to do so could result in equipment damage and/or personal injury.
Pinch hazard! During the upward or downward movement of the workstation, pinch points can be created by the sliding and rotating components. To avoid injury or property damage, keep your hands, arms and property away from these moving components and pinch points. Failure to follow this instruction may result in property damage and/or serious injury.
Caution! Ensure all equipment cables are of adequate length for the highest workstation position. Failure to do so may result in property damage and/or personal injury.
Warning! When lowering or raising the workstation, ensure the mounted equipment is properly secured or supported and the speed is slow enough to prevent any equipment instability. Failure to do so may result in property damage and/or personal injury.
figure 1

Instruction manual

Paddle 6

1. To move the workstation up or down, squeeze the paddle located on the right side of the Workstation. (figure 1)
2. When the workstation is at the desired height, release the paddle to lock the Workstation into position.
Adding equipment to the Workstation
You can place equipment onto the Workstation or you can use the provided hardware and grommet hole to mount your equipment to the Workstation.
Warning! If you attach a monitor arm to the Workstation, make sure that you don't position the monitors beyond the edge of the desk surface. If you extend the monitors past the desk surface, you could create a tipping hazard. Make sure that you lower the Workstation to its lowest position before you add equipment to it, distribute the weight across the Workstation evenly, and don't extend the monitors beyond the edge of the adjustable desk surface.
Place free-standing equipment onto the Workstation
1. Move the Workstation to the lowest position. 2. Place your equipment (for example, monitors, keyboard, mouse, and so on) onto the
workstation. (figure 2) Warning! Do not exceed the weight capacity of the Workstation.
figure 2
0 to 28 lb.
0 to 5 lb.
Instruction manual 7

3. Make sure that your equipment is stable on the workstation before you move the Workstation.
4. Raise the Workstation a short distance. If you can't easily move the Workstation upwards or it begins to move downwards when you squeeze the paddle, you need to adjust the tension. For more information about how to do this, see the "Adjust the tension of the Workstation" section of the manual.
5. Position your equipment cables so that they run through the loops located at the back of the Workstation. (figure 3)
6. If necessary, reposition the keyboard tray. For more information about how to do this, see the "Reposition the keyboard tray" section of the manual.
figure 3

Cables

Loop

Instruction manual 8

Clamp equipment to the grommet hole
Warning! Do not exceed the weight capacity of the Workstation.

StarTech.com offers optional monitor mounting accessories that are compatible with the Workstation. For example, the ARMDUAL, ARMSLIM, ARMPIVOT, and so on. To attach a mounting accessory to the grommet hole on the Workstation, complete the following steps.

Note: If the mounting accessory is configured for a desk mount, you need to reconfigure it for a grommet hole mount. For more information about how to do this, see the documentation that came with the mounting accessory.
1. Move the Workstation to the highest position.
2. Position the mounting accessory over the grommet hole on the Workstation.
3. Depending on the size of the threaded hole on the mounting accessory, thread either the M10 x 50 mm bolt or the ³/ - 16 x 50 mm bolt through the clamp plate.
Note: If the threaded hole on the mounting accessory isn't compatible with the bolts provided with the Workstation, you may need to use the hardware that came with the mounting accessory, if suitable.
4. Hold the mounting accessory upright, thread the bolt up through the grommet hole and into the accessory, and use a wrench to tighten the bolt. (figure 4)
5. To mount additional equipment, move the Workstation to the lowest position and add your equipment.

figure 4

Mounting accessory

Instruction manual

Grommet hole
Clamp plate M10 x 50 bolt or ³/ - 16 x 50 mm bolt
9

6. Make sure that your equipment is stable on the workstation before you move the Workstation.
7. Raise the Workstation a short distance. If you can't easily move the Workstation upwards or it begins to move downwards when you squeeze the paddle, you need to adjust the tension. For more information about how to do this, see the "Adjust the tension of the Workstation" section of the manual.
8. Position your equipment cables so that they run through the loops located at the back of the Workstation. (figure 5)
9. If necessary, reposition the keyboard tray. For more information about how to do this, see the "Reposition the keyboard tray" section of the manual.
Adjust the tension of the Workstation
Warning! Remove all equipment from the Workstation before you begin to adjust the tension. 1. Carefully remove all of the equipment from the Workstation.
figure 5
Cables Loop
Instruction manual 10

2. Raise the Workstation to the highest position.
3. To adjust the tension of the Workstation, use the large hex key to turn the adjustment screw clockwise or counterclockwise. (figure 6)
4. To check to see if the tension requires further adjustment, move the Workstation to the lowest position. Place the equipment back onto the Workstation and do one of the following:
· If the tension is at the appropriate setting for the weight of the equipment, move the Workstation to the desired height.
· If you need to adjust the tension further, complete steps 1 to 3 until the tension is at the appropriate setting for the weight of the equipment.
Reposition the keyboard tray
1. Carefully remove all of the equipment from the Workstation.
2. Raise the Workstation to a position that enables you to access the underside of the keyboard tray.
3. Use the small hex key to remove the two sets of six screws from the underside of the keyboard tray. (figure 7)
4. Move the keyboard tray, line up the holes, and insert the two sets of six screws.
5. Use the small hex key to tighten the screws.

figure 6

Large hex key

Adjustment screw

Instruction manual 11

figure 7

Small hex key

Note: The Workstation is flipped over in the first drawing to illustrate where the screws are located.

Instruction manual 12

Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Instruction manual 13

Hard-to-find made easy. At StarTech.com, that isn't a slogan. It's a promise.
StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products -- and all the parts that bridge the old and new -- we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You'll be connected to the products you need in no time. Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools. StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Reviews Share your experiences using StarTech.com products, including product applications and setup, what you love about the products, and areas for improvement.

StarTech.com Ltd.
45 Artisans Crescent London, Ontario N5V 5E9 Canada

StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom

StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

FR: fr.startech.com DE: de.startech.com

ES: es.startech.com NL: nl.startech.com

IT: it.startech.com JP: jp.startech.com

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

References

Adobe PDF Library 15.0 Adobe InDesign 15.1 (Windows)