MSI Versa 300 Elite & Versa 300 Wireless Gaming Mouse Quick Start Guide
Model: MS-8ZBC / MS-8ZBD
Product Overview
This section provides a visual guide to the MSI Versa 300 Elite Wireless and Versa 300 Wireless gaming mice.
Key Components:
- 1. Left Button: Primary click button.
- 2. Right Button: Secondary click button.
- 3. Scroll Wheel: For scrolling and middle-click functionality.
- 4. Side Button 1: Default function is 'Next Page'.
- 5. Side Button 2: Default function is 'Previous Page'.
- 6. Grip: MSI Diamond LightGrip (VERSA 300 ELITE WIRELESS) or MSI Diamond Patterned Anti-Slip Grip (VERSA 300 WIRELESS) for enhanced control.
- 7. Shield RGB LED: Indicates status and battery level.
- 8. DPI Switch: Allows adjustment of mouse sensitivity (Dots Per Inch).
- 9. Wireless USB Dongle: Connects the mouse wirelessly via 2.4 GHz.
- 10. USB Charging Cable: For charging the mouse.
- 11. PTFE Mouse Feet: Ensure smooth gliding on surfaces.
- 12. Connectivity Switch: Select between Bluetooth, 2.4 GHz wireless, or Off.
- 13. USB Dongle Storage: Compartment to store the USB dongle when not in use.
- 14. Optical Sensor: Tracks mouse movement.
RGB LED Hotkey Control
The RGB LED lighting can be managed through the MSI Center software (for VERSA 300 ELITE WIRELESS only) or via keyboard shortcuts.
| Key Combination | Effect |
|---|---|
| DPI (6) + Right Button (2) | Cycle brightness levels |
| DPI (6) + Scroll Button (3) | Cycle predefined effects |
| DPI (6) + Side Button 1 (4) | Cycle effect speed levels |
| DPI (6) + Side Button 2 (5) | Cycle color / effect direction |
2.4 GHz Wireless & Bluetooth Pairing
The mouse connects automatically via the included USB dongle using 2.4 GHz wireless technology. For Bluetooth pairing, follow these steps:
- To enter pairing mode, press and hold the DPI Switch (8) and Left Button (1) simultaneously for 5 seconds. The Shield RGB LED (7) will flash.
- 2.4 GHz Wireless: Plug the Wireless USB Dongle (9) into your device within the first 30 seconds of entering pairing mode.
- Bluetooth: Activate Bluetooth on your device and select the mouse from the list of available devices. The LED will flash blue for Bluetooth pairing.
DPI Cycle Presets
Cycle through different DPI presets using the DPI Switch (8). The Shield RGB LED (7) color indicates the current DPI level.
DPI Presets and LED Colors:
| VERSA 300 ELITE WIRELESS* | VERSA 300 WIRELESS | ||
|---|---|---|---|
| DPI Preset | LED Color | DPI Preset | LED Color |
| 400 | Blue | 400 | Blue |
| 800 | Magenta | 800 | Magenta |
| 1600 (default) | Red | 1600 (default) | Red |
| 3200 | Yellow | 2400 | Orange |
| 6400 | Green | 3200 | Yellow |
| 4000 | Purple | ||
| 6400 | Green | ||
| 8000 | White | ||
*Maximum DPI: 26,000 (via MSI Center)
RGB LED Battery Indicator
The Shield RGB LED (7) indicates the battery charge state:
| Connected with USB Cable | LED Color / Effect | Powered on wirelessly | LED Color / Effect |
|---|---|---|---|
| Fully charged | Green (Steady) | 100% to 70% | Green (Steady) |
| 90% to 100% (charging) | Green (Steady) | 69% to 30% | Yellow (Steady) |
| 70% to 89% (charging) | Green (Breathing) | 29% to 0% | Red (Blinking) |
| 30% to 69% (charging) | Yellow (Breathing) | ||
| 0% to 29% (charging) | Red (Breathing) |
For more information, please visit the MSI official website.
Compliance Information
This section details various compliance statements for the MSI Versa 300 series gaming mice.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.
Services web address: www.msi.com
RF Exposure Statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
- VERSA 300 ELITE WIRELESS: FCC ID: I4L-MS-8ZBC, IC: I4L-GM31WD
- VERSA 300 WIRELESS: FCC ID: I4L-MS-8ZBD, IC: I4L-WD03
CE RED Compliance Statement
Hereby, MSI Inc. declares that the radio equipment type MS-8ZBC/ MS-8ZBD is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.msi.com
UKCA Compliance Statement
Hereby, MSI Inc. declares that the radio equipment type MS-8ZBC / MS-8ZBD is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The full text of the UK Declaration of Conformity may be found at the following internet address: https://www.msi.com
ISED Compliance Statement (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
- VERSA 300 ELITE WIRELESS: IC: 3715A-8ZBC, IC: 3715A-GM31WD
- VERSA 300 WIRELESS: IC: 3715A-8ZBD, IC: 3715A-WD03
CAN ICES(B)/NBM(B)
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la claseee B est conforme a la norme ICES-003 du Canada.
Safety Instructions
Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user's manual should be noted.
- Do not leave the device in an unconditioned environment with a storage temperature above 60°C (140°F) or below 0°C (32°F), which may damage the device.
- This device should be operated under maximum ambient temperature of 40°C (104°F).
- Replacement of battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types).
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- High or low extreme temperatures that a BATTERY can be subjected to during use, storage or transportation.
- Low air pressure at high altitude.
REACH Compliance: Complying with the REACH regulatory framework, MSI publishes chemical substances information at msi REACH website.
Environmental Disposal: MSI products are designed to comply with environmental regulations. Please follow local guidelines for disposal and recycling.
