Electrolux FLEXIO POWER CLEAN Z823 Wet & Dry Vacuum Cleaner

Product and Accessories

This section details the components and cleaning tools included with your Electrolux vacuum cleaner.

Cleaning Tools

• Wet Nozzle: Ideal for absorbing water or liquid.
• Crevice Nozzle: For cleaning corners, between cushions, or hard-to-reach places.
• Dusting Brush: Used for furniture, blinds, books, lamp shades, and shelves.
• Floor Brush: Ideal for daily cleaning on carpets and hard floors.

Main Unit Components

The main unit is depicted with the following numbered parts:

• 1. Wet Nozzle
• 2. Plastic Tubes
• 3. Flexible Hose
• 4. Tools on Board (Storage for accessories)
• 5. On/Off Switch
• 6. Power Plug
• 7. Clasp (For securing the top cover)
• 8. Wheel
• 9. Exhaust Grille
• 10. Drum (Dust/liquid container)

Safety Instructions

Please read these operating instructions carefully and observe all safety instructions. Keep this booklet for future reference.

• Read all instructions and use the appliance only for its intended purpose.
• Switch off the appliance before plugging or unplugging it from the wall socket. Do not pull the cord to remove the plug.
• Always remove the plug from the wall socket before any user maintenance or cleaning.
• Do not handle the plug with wet hands.
• Do not operate with a damaged electrical cord or plug. If damaged, return to an authorized Electrolux service centre.
• If the appliance malfunctions or is damaged, return it to the nearest authorized Electrolux service centre for examination, repair, or adjustment.
• Do not carry or drag the appliance by the electrical cord.
• Keep the electrical cord away from heat, oil, sharp edges, and rough or hot surfaces. Do not run the appliance over the cord.
• Hold the plug when rewinding the cord to prevent it from whipping or hitting the appliance.
• An extension cord may be used if it has a higher rating than the appliance. Consult the appliance's rating plate or an authorized Electrolux service centre for details.
• Do not immerse the electrical cord, plug, or appliance in water or other liquids to protect against electric shock.
• Do not expose the appliance to rain.
• Do not use the appliance outdoors.
• Never leave the appliance running unattended.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person.
• Children should be supervised to ensure they do not play with the appliance.
• Store the appliance away from high heat sources.
• Do not use this appliance to vacuum: flammable or combustible substances, hard pointed objects, hot ash, lighted cigarette ends, burning or smoking materials, or large quantities of fine dust (e.g., lime, cement, plaster, toner dust).
• Do not operate in areas where such substances may be present.
• Ensure all orifices/vents are kept free from blockages to prevent reduction in airflow. Do not insert objects into these vents.
• Do not use without filters in place.
• If the motor overheats, it will turn off automatically. Press the on/off button and wait a few minutes before switching on again.
• Exercise extra care when vacuuming staircases.
• It is dangerous to alter specifications or modify the vacuum cleaner; use only Electrolux-recommended accessories.
• Customers should not attempt to repair the vacuum cleaner themselves.
• Repairs and servicing should only be performed by an authorized Electrolux service centre using genuine Electrolux spare parts. Failure to do so may void the warranty.
• This vacuum cleaner is for household use only.
• Important: Connect only to a power supply with voltage and frequency complying with the appliance rating plate.

Quick Guide

When taking the product out of its packaging

Check for damages.

Vacuum Cleaner Assembling

Always remove the plug from the power supply before fitting or removing accessories. Before putting the appliance into service, check if all filters are inserted correctly.

Connecting Vacuum Cleaner

Fitting or removing the flexible hose to the air inlet (A)

Diagram shows a hose connecting to the main unit's air inlet.

• Fit the flexible hose into the air inlet. Turn the hose grip clockwise until it clicks into position.
• To release, first remove the plug from the power socket. Detach the flexible hose firmly from the air intake duct by turning anti-clockwise.

Fitting or removing the flexible hose to the air outlet (B)

Diagram shows a hose connecting to the main unit's air outlet.

• Remove the exhaust grille and the filter.
• Fit the flexible hose into the air outlet. Turn the hose grip clockwise until it clicks into position.
• To release, first remove the plug from the power socket. Detach the flexible hose firmly from the air outlet duct by turning anti-clockwise.

Fitting the extension tubes and accessories

Diagram shows how to connect extension tubes and attach a nozzle.

• Fit the extension tube to the handle.
• Fit the brush to the extension tube.

Instructions for Use

Cleaning Tools

The crevice tool and dusting brush are stored on the accessories holder.

Floor Brush

Ideal for the daily cleaning on carpets and hard floors.

Diagram shows the floor brush being used on a carpet and then on a hard floor.

Wet Nozzle

Ideal for absorbing water or liquid.

Diagram shows the wet nozzle being used to absorb water.

Crevice Nozzle

The crevice nozzle can be used for cleaning corners, between cushions, or difficult-to-reach places.

Diagram shows the crevice nozzle.

Dusting Brush

Dusting brush is used for furniture, blinds, books, lamp shades, and shelves.

Diagram shows the dusting brush.

Operating Procedure

Diagram shows the main unit of the vacuum cleaner.

• Before using the appliance, insert the plug into the power supply.
• Press the On/Off button to switch the unit on. To stop it, press the On/Off button again.
• Always operate the cleaner with the filter installed. Undo the clasp and remove the top cover from the body. Secure the filter in its position by pushing down the filter frame in its slot.

Vacuuming Dust

• Before vacuuming dust, make sure the body, motor housing, filter, and attachments are dry.
• Fit the floor brush or other tools to vacuum the dust.

Absorbing Water

Diagram shows the inside of the vacuum cleaner with a safety buoy and a water level indicator.

• You may fit in the wet nozzle or other cleaning tools.
• The safety buoy will not work when the body is filled with liquid. Please switch off the unit and remove the top cover. Pour out the liquid.
• If the appliance has fallen over, water may enter into the motor. Ensure that there is no water inside the motor before operating again.

Blowing Dust

• Remove the filter grille from the blower position.
• Fit the hose connection.
• Once complete, remove the hose connection, fit the exhaust grille to its position, and turn/close tightly.

Note: If suction power weakens during operation, turn off the unit for a moment before resuming. If it still does not work, clean the body and dust bin. Continuous extended use with a full dust bin may increase motor temperature and damage the unit.

Maintenance

Dust Filter Replacement

Note: Before any cleaning or maintenance, ensure the cleaner is unplugged from the wall socket.

Diagram sequence showing removal of the top cover, dust filter, and rinsing the filter.

• After detaching the flexible tube, remove the top cover.
• Lift up the dust filter to remove it from its slot.
• Remove filter.
• Rinse filter in lukewarm water and dry the filter completely.
• Assemble back the filter.

• When suction is extremely low with a washed filter, replace with a new one. Filter life may vary. Contact an Electrolux service station for new filters.
• Replace the top cover and secure both latches on each side.

Cleaning Filter

Note:

• Filter must be cleaned when it becomes visibly soiled.
• Disconnect from electrical outlet before cleaning filters.
• Do not use a washing machine to rinse filters.
• Do not use a hair dryer to dry filters.

How To Store Your Vacuum

• Choose a storage location that is both safe and dry.
• The vacuum comes with an onboard tool coupling for storing the floor nozzle; slide the parking clip onto the parking positions on the cleaner.
• Keep the extension tubes, nozzles, and hose together to avoid losing them.

Troubleshooting

In case of malfunction, check for probable reasons and make corrections. If the problem persists, consult the Electrolux Authorized Service Centre.

Technical Data

For Z823

220-240V, 50/60Hz

Max Power (W): 1400W

Importer Information

Contact details for Electrolux in various countries are provided:

• Thailand: Electrolux Building, 1910 New Petchburi Road, Bangkok.
• Malaysia: Electrolux Home Appliances Sdn Bhd., Petaling Jaya, Selangor.
• Vietnam: Electrolux Vietnam Ltd., Floor 10, Sofic Tower, Ho Chi Minh City. Tel: +(84 28) 3910 5465. Customer Care: 1800-58-8899.
• Singapore: Electrolux SEA Pte Ltd, 351 Braddell Road. Customer Care: +(65) 6727 3699.
• Indonesia: PT Electrolux Indonesia, Jl. Abdul Muis No.34, Jakarta Pusat. Hotline: 0804 111 9999.
• Philippines: Electrolux Philippines Inc., 10th Fir. WSth Avenue Building, Bonifacio Global City, Taguig.