Oasis PWSMFSBF-FVF Surface Mount Mechanical Bottle Filler

Product Overview

The Oasis PWSMFSBF-FVF is a non-refrigerated, surface-mount mechanical bottle filler designed to deliver ambient water. It features manual push-button activation with laminar flow and a durable stainless steel construction. Key components incorporate Freshield® antimicrobial technology, which uses a silver-based compound to inhibit the growth of microorganisms, preventing discoloration and odors. The unit is designed for low profile installation and complies with major accessibility and safety standards.

Key Features

• Built-in 100-micron strainer to filter particles.
• Waterways constructed with lead-free materials.
• Low-profile design for space-saving installation.
• Heavy-duty galvanized steel frame.
• Mechanically activated push button.
• Filter integrated into the bottle filler.
• Permanent logos on alcove and stainless steel wrapper.
• Surface mount frame assembly included.

Filtration System

OASIS VersaFilter III cartridge, certified to NSF/ANSI 42, 53, 372, and 401. Reduces lead, chlorine, taste, odor, and microplastics. Rated for 4,750 gallons.

Specifications

Installation

Ships in one box. Consult local, state, and federal codes for proper mounting height prior to rough-in. Surface mount frame is included; water supply and drain connections are required. Shipped with complete installation instructions and wall mounting brackets. Note: Remote chiller units must be located separately as they do not fit within the unit's housing or a typical stud wall cavity.

Finishes

Standard cabinet finish: Stainless steel.

Warranty

Limited 1-Year Warranty (Continental United States and Canada) on bottle fillers and electrical components. Export Warranty: 1-Year on component parts. Detailed warranty certificates are provided with each unit or available upon request.

Certifications and Compliance

• Certified to UL 399 and CAN/CSA C22.2 No.120 (for electric water coolers).
• Product Certified to NSF/ANSI Standard 61-G & 372.
• Conforms to "Lead Free" plumbing requirements as defined by California, Vermont, Maryland, Louisiana state laws, and the U.S. Safe Drinking Water Act.
• Complies with ADA (Americans with Disabilities Act) requirements when properly installed.
• Logos: LEAD FREE, NSF, UL, C, US.

Technical Diagram Description

The diagram illustrates the dimensions and installation points for the Oasis PWSMFSBF-FVF Surface Mount Mechanical Bottle Filler. Key dimensions include: Overall width: 16-1/4 inches [413 mm]. Overall depth: Approximately 24-13/16 inches [630.3 mm] from wall. Dispense height: 13 inches [330.2 mm]. Pushbutton height: Approximately 47-15/16 inches [1217.9 mm] from floor line (recommended barrier-free height). Water supply stub out: 3/8 inch [~10mm] O.D. at an optimum location. Waste stub out: 1-1/4 inch [~32mm] IPS at an optimum location. Drip tray height: Approximately 34-11/32 inches [872.5 mm] from floor line. Overall height from floor line to top: Approximately 51 inches [1295.4 mm]. Notes indicate: 1. Recommended adult barrier-free height installation is shown; adjust vertical dimensions as required by codes. 2. A 3/8 inch O.D. water inlet with strainer is provided. 3. A stop valve, trap, pipe connector to the waste line, and a 3/8 compression fitting are NOT provided. 4. All dimensions are in inches, with millimeters provided in brackets [ ].

Accessories

• OASIS VersaFilter III Replacement Cartridge (OASIS Item #041145-001)
• Remote Chillers: R5 Chiller (OASIS Item # 502990), R8 Chiller (OASIS Item # 502991), R12 Chiller (OASIS Item # 502993).

Contact Information

OASIS INTERNATIONAL
222 East Campus View Blvd., Columbus, OH 43235
Website: www.oasiscoolers.com
Phone: 1-800-646-2747

Important Warnings

⚠️ WARNING: Cancer and Reproductive Harm. Visit www.P65Warnings.ca.gov for more information.

Specifications are subject to change without notice.