Aldes GALVA Range: C 45° GALVA - D400 Elbow
Model: 11093350
Product Type: Galvanized Rigid Ducting, Aluminum, and Special Ducts
Product Description
The C 45° GALVA elbow is designed to change the direction of a galvanized duct by 45 degrees. For diameters up to 200 mm, the elbows are stamped. For diameters from 250 mm to 900 mm, the elbows are constructed in segments.
Image: A photograph of a curved metal duct fitting, identified as a 'Coude 45° secteur'.
Areas of Application
- Residential collective housing
- New construction
- Renovation projects
- Tertiary sector premises
Implementation
- Easy installation of accessories through push-fit connections: ducts are female, accessories are male.
- Sealing should be performed using mastic and/or sealing tape.
- Fixing to the duct should be done with self-drilling screws (4 to 6, depending on diameter).
Reference Argument
Application
Change of direction by 45° for tertiary and collective ducting systems.
Description
45° elbow in galvanized steel, diameter 400 mm.
Key Characteristics
- Available for diameters ranging from 80 mm to 900 mm.
- Made of galvanized steel conforming to standard EN 10346, ensuring coating regularity.
- Fire classification: M0.
General Data
| References | Main Material |
|---|---|
| 11093350 | Galvanized Steel |
Dimensional Data
| References | Ø (mm) | Ø A (mm) |
|---|---|---|
| 11093350 | 400 | 400 |
Diagram: Technical diagram showing the dimensions of the 45° elbow. It indicates a main diameter (Ø) of 400 mm and an associated diameter (Ø A) of 400 mm.
Regulatory Data
| References | Fire Classification |
|---|---|
| 11093350 | M0 |
