FLIR ONE Edge Series User Manual

Notice to User

Online Documentation

Our manuals are continuously updated and published online. To access the FLIR ONE Edge series user manual and other product documentation, go to https://support.flir.com/resources/99yx.

To access the manuals for other FLIR products, including discontinued ones, go to https://support.flir.com/resources/app.

Support

Contact the FLIR Systems Technical Support Center for any problems or questions about your product: https://support.flir.com.

About This Manual

FLIR Systems issues generic manuals covering multiple cameras within a model line. This manual may contain descriptions or explanations not applicable to your specific camera model. The authoritative version of this publication is English. In case of translation errors, the English text takes precedence, and late changes are first implemented in English.

Declaration of Conformity

The full text of the Declaration of Conformity is available at: https://support.flir.com/resources/99yx.

Safety Information

WARNING

Applicability: Class B digital devices. This equipment complies with FCC Rules Part 15 limits for Class B digital devices, providing reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. If interference occurs, users are encouraged to try one or more of the following:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to a circuit different from the receiver's.
• Consult the dealer or an experienced radio/TV technician.

WARNING

Applicability: Digital devices subject to 15.19/RSS-GEN. This device complies with FCC Rules Part 15 and Industry Canada licence-exempt RSS standards. Operation is subject to two conditions: 1. The device must not cause harmful interference. 2. The device must accept any received interference, including interference that may cause undesired operation.

WARNING

Applicability: Digital devices subject to 15.21. Changes or modifications not expressly approved by FLIR Systems may void the FCC authorization to operate this equipment.

WARNING

Applicability: Digital devices subject to 2.1091/2.1093/KDB 447498/RSS-102. Radiofrequency radiation exposure Information: For body-worn operation, this device has been tested and meets FCC RF exposure guidelines. Use the device to minimize potential for human contact during normal operation.

WARNING

This device is granted pursuant to the Japanese Radio Law and the Japanese Telecommunications Business Law. Modification of this device will invalidate its granted designation number.

CAUTION

Do not point the infrared camera at strong energy sources like lasers or the sun. This can affect accuracy and damage the camera's detector.

CAUTION

Do not use the camera in temperatures exceeding 50°C (122°F) unless specified otherwise. High temperatures can damage the camera.

CAUTION

Battery charging temperature range is 0°C to 35°C (32°F to 95°F), except for the Korean market (10°C to 35°C / 50°F to 95°F). Charging outside these ranges can cause the battery to overheat, break, or degrade performance/lifespan.

CAUTION

Do not apply solvents or similar liquids to the camera, cables, or other items. This can cause damage and injury.

CAUTION

Be careful when cleaning the infrared lens. The lens has an anti-reflective coating that is easily damaged. Damage to the lens can occur.

CAUTION

The 5 GHz band is only allowed for indoor use in Japan and Canada.

CAUTION

Failure to observe safety instructions can result in fire, electric shock, injury, or damage. The housing contains sensitive electronic components and batteries.

• Do not pierce, break, crush, or cut the device or battery.
• Do not expose the device or battery to open flame or extreme temperatures.
• Do not expose the device or battery to liquids or extremely low air pressure.
• Do not drop the device or battery.
• Do not attempt to change the battery.
• Recycle or dispose of the device/battery separately from household waste.

CAUTION

Be careful when observing very hot objects like fire and molten metal.

Camera Parts

Figure 3.1 View from the front and from the bottom

The FLIR ONE Edge camera has the following components:

• 1. On/Off button
• 2. Indicator LEDs
• 3. USB-C charging port
• 4. Visual camera
• 5. Thermal camera
• 6. Extending arm

Quick Start Guide

1. Install the FLIR ONE app from your preferred app store.
2. Attach the FLIR ONE Edge camera to your mobile device by extending the arm until clamped, or place it close to the device. Note: Avoid extending the arm to its end position to prevent damage.
3. Turn on the camera by pressing and holding the On/Off button until the LEDs flash (booting takes about 20 seconds).
4. Start the FLIR ONE app on your mobile device.
5. Follow the app's guidance to set up and connect (pair) the camera with your mobile device.
6. Turn off the camera by pressing and holding the On/Off button until the LEDs turn off.

Handling the Camera

General Information

• Connecting the FLIR ONE Edge camera may impact your mobile device's signal strength, compass accuracy, and NFC signaling distance.
• When paired with the FLIR ONE app, your mobile device connects to the internet via mobile data only (not Wi-Fi).
• If the camera is not physically attached, the app will notify you if the distance becomes too great, potentially causing connection loss.
• If you forget the Wi-Fi password for the FLIR ONE Edge camera, a factory reset is required.

Charging the Battery

1. Connect a power supply to a wall outlet.
2. Connect the power supply to the FLIR ONE Edge camera's USB-C charging port.
3. Observe the front LEDs: they flash during charging and show a steady light when fully charged.

Turning the Camera On and Off

• To turn on: Press and hold the On/Off button until LEDs flash. Booting takes approximately 20 seconds.
• To turn off: Press and hold the On/Off button until LEDs turn off.
• Note: If communication between the camera and app is inactive for over 7 minutes, the camera automatically turns off.

Connecting the Camera

1. Place the FLIR ONE Edge camera close to your mobile device.
2. Ensure the camera is turned on.
3. Start the FLIR ONE app on your mobile device.
4. Follow the app's guidance to set up and connect (pair) the camera.

Performing a Factory Reset

A factory reset is necessary if you forget the camera password or if the camera is not functioning as expected (e.g., persistent connection issues). After a reset, you must set up the connection again.

Procedure:

1. Turn off the FLIR ONE Edge camera.
2. Ensure the USB cable is disconnected.
3. Press and hold the On/Off button until the LEDs show a steady light.
4. The camera will restart after the factory reset.

Using the FLIR ONE App

Camera View

When connected, the FLIR ONE app displays a live view from the camera, allowing you to take images or record videos. The camera view offers:

• IR Scale: Hide/show scale, adjust scale limits.
• Color: Choose from nine color palettes.
• Measurements: Adjustable measurement spots, with automatic tracking of the hottest and coldest spots.
• Image mode: Select between Thermal, DC (visual), and MSX.
• MSX Distance: Align visual and thermal images in MSX mode based on object distance.
• Temperature range: Select a suitable object temperature range.

Calibration

The camera automatically calibrates and refreshes the image periodically for optimal performance. A mechanical shutter inside the thermal camera activates during calibration, producing a clicking sound and briefly freezing the image. Calibration occurs on startup and periodically thereafter. Manual calibration can also be initiated via the FLIR ONE app.

Gallery

Captured images and videos can be viewed in the FLIR ONE app's gallery. They can also be saved to your mobile device if permission is granted during setup or in app settings. Image details can be viewed, and notes can be added. Images can be edited within the app using the same functionality as in the camera view. Images and videos can be shared with other apps, such as social media.

Cloud Storage

FLIR Ignite is a cloud storage service for thermal images. It allows you to view, organize, search, download, and share your uploaded images. You can manually upload files from the FLIR ONE app gallery to your FLIR Ignite account or configure automatic uploads. You can choose to use mobile data for uploads. If this setting is off, you must disconnect the FLIR ONE app from the camera and pair it with a FLIR Ignite account before uploading. To create and access your FLIR Ignite account, visit https://ignite.flir.com.

Drawer Menu

The drawer menu provides access to:

• Settings and account information for FLIR Ignite.
• Information related to the camera.
• Settings for the FLIR ONE app.
• Help on how to use the app.
• Contact information for support.
• Information on other compatible apps for the FLIR ONE Edge camera.

Using a Thermal Camera

Measurements

Thermal cameras display the temperature on an object's surface. Measurement accuracy is influenced by factors such as distance from the object, ambient temperature, and the emissivity of the material. Learn more about the science of thermography at: https://www.flir.com/support-center/training.

Emissivity

Emissivity is a material property that affects displayed temperature readings. It is a relative rating of how well a material emits thermal energy. Some materials, like glossy metals, are poor emitters. For most materials, the default "matte" setting provides a fair approximation.

Cleaning the Camera

Camera Housing, Cables, and Other Items

Use warm water or a weak detergent solution with a soft cloth. Soak the cloth, wring out excess liquid, and clean the item. CAUTION: Do not apply solvents or similar liquids, as this can cause damage.

Infrared Lens

Use a commercial lens cleaning liquid with more than 30% isopropyl alcohol or 96% ethyl alcohol with cotton wool. Soak cotton wool, wring out excess liquid, and clean the lens gently once, then discard the cotton wool. CAUTION: The lens has a delicate anti-reflective coating that can be damaged by vigorous cleaning or unsuitable cloths.

WARNING: Ensure you read all applicable MSDS (Material Safety Data Sheets) and warning labels on containers before using cleaning liquids, as they can be dangerous.

Disposal of Electronic Waste

Waste of Electrical and Electronic Equipment (WEEE) poses risks to human health and the environment if not disposed of properly. This product should not be discarded as unsorted waste but sent to separate collection facilities for recovery and recycling. More information is available from the relevant local authority.

Disassembly for Recycling

Before disposal, disassemble the camera and discard the parts separately:

1. Use a thin knife to lift a corner of the product label and remove it.
2. Use a Torx T6 screwdriver to remove the two screws from the back cover, then remove the cover.
3. Disconnect the battery connector by lifting the side knob and pull out the battery.
4. Remove the gap pad.
5. Use a Torx T6 screwdriver to remove the four screws holding the electronics assembly, then lift out the assembly.

Component Breakdown:

• 1. Product label: Plastic (PET)
• 2. Back cover: Metal (Zinc, Steel), Silicone rubber, PU foam
• 3. Battery: Li-ion
• 4. Gap pad: HC5000 (silicone, fiberglass)
• 5. Electronics assembly: circuit board, components
• 6. Camera body: Plastic (PC-ABS), Glass (BK7, Si), Metal (Aluminum), PU foam

Disclaimers

Legal Disclaimer

For warranty terms, refer to https://www.flir.com/warranty.

U.S. Government Regulations

This product may be subject to U.S. Export Regulations. Send inquiries to exportquestions@flir.com.

Patents

This product is protected by patents, design patents, and pending applications. Refer to the FLIR Systems' patent registry: https://www.flir.com/patentnotices.

Quality Assurance

The Quality Management System under which these products are developed and manufactured has been certified in accordance with the ISO 9001 standard. FLIR Systems is committed to continuous development; therefore, we reserve the right to make changes and improvements without prior notice.

Third-Party Licenses

Information about third-party licenses is available in the user interface of the product.

Usage Statistics

FLIR Systems reserves the right to gather anonymous usage statistics to help maintain and improve the quality of our software and services.

Copyright

© 2022 FLIR Systems, Inc. All rights reserved worldwide. No parts of the software, including source code, may be reproduced, transmitted, transcribed, or translated into any language or computer language in any form or by any means, electronic, magnetic, optical, manual, or otherwise, without the prior written permission of FLIR Systems. The documentation must not, in whole or part, be copied, photocopied, reproduced, translated, or transmitted to any electronic medium or machine-readable form without prior consent, in writing, from FLIR Systems. Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names, or company names referenced herein are used for identification only and are the property of their respective owners.