AT&T DECT 6.0 Cordless Telephone/Answering System with BLUETOOTH® Wireless Technology

Congratulations

Thank you for purchasing this AT&T product. Please read the Important safety information section before use. Model and serial numbers are on the bottom of the telephone base. Save your receipt and original packaging for warranty service.

For customer service, visit telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268.

For a full installation and operation manual, refer to telephones.att.com/manuals.

Parts Checklist

Your telephone package contains the following items:

• Quick start guide
• Smart call blocker leaflet
• Cordless handset (quantity varies by model)
• Charger for cordless handset with power adapter installed (quantity varies by model)
• Batteries for cordless handset (quantity varies by model)
• Battery compartment cover (quantity varies by model)
• Telephone line cord
• Power adapter for telephone base
• Telephone base

Note: The antibacterial plastic is independently laboratory tested according to JIS Z 2801:2010. This technology does not protect users or others against all disease-causing microbes (including COVID-19) and is not a substitute for good hygiene and/or cleaning practices.

Important Safety Information

This symbol ! alerts you to important operating or servicing instructions. Always follow basic safety precautions to reduce the risk of injury, fire, or electric shock.

• Read and understand all instructions in the user manual. Observe all markings on the product.
• Avoid using the telephone during a thunderstorm.
• Do not use the telephone near a gas leak. A spark could occur when plugging in the adapter or placing the handset in the cradle, which could ignite flammable gases.
• Do not use the product near water or when wet. Do not use cleaning liquids or aerosol sprays. If the product contacts liquid, unplug cords immediately and allow it to dry thoroughly.
• Install the product in a protected location to prevent tripping over cords. Protect cords from damage.
• If the product does not operate normally, refer to the Troubleshooting section of the online Complete user's manual. Do not open the product except as directed in the user's manual.
• Replace batteries only as described in the user's manual. Do not burn or puncture batteries.
• The power adapter is intended for vertical or floor mount. Do not plug into a ceiling or under-the-table outlet.
• Ensure the socket-outlet is installed near the equipment and is easily accessible.

CAUTIONS: Use only the provided power adapter. For replacements, visit telephones.att.com or call 1 (800) 222-3111 (1 (866) 288-4268 in Canada).

Battery Safety: To prevent fire or battery explosion, replace with the correct battery type. Dispose of used batteries according to instructions. Do not use batteries in extreme temperatures, if damaged, or if disposed of in fire or hot oven. Use only supplied rechargeable batteries or replacement batteries (model BT262661).

Cordless Telephone Precautions:

• Privacy: Conversations are transmitted by radio waves and may be intercepted.
• Electrical Power: The telephone base must be connected to a working electrical outlet not controlled by a wall switch.
• TV Interference: Do not place the telephone base near a TV or VCR to minimize interference.
• Rechargeable Batteries: Handle with care to avoid short circuits. Observe proper polarity.

Pacemaker Precautions: Keep wireless telephones at least six inches from a pacemaker. Do not place the handset directly over the pacemaker. Use the handset on the ear opposite the pacemaker.

ECO mode: This power conserving technology reduces power consumption.

Answering Systems: For two-way recording, inform the other party that the call is being recorded to comply with federal or state regulations.

Installation

Telephone Base

Notes:

• Plug one end of the telephone line cord into a telephone jack or a DSL filter.
• A DSL filter (not included) is required for DSL high-speed Internet service.

Charger

Caution: Use only the provided power adapter(s). For replacements, visit telephones.att.com or call 1 (800) 222-3111 (1 (866) 288-4268 in Canada).

Battery Installation

1. Install the battery as shown.
2. Charge your handset(s) before initial use. The CHARGE light on the handset is on during charging. A full charge takes 16 hours.

Handset Overview

The handset has the following features:

1. CHARGE light:

Indicates when the handset is charging.

2. CELL:

Press to make or answer a cell call. Press during a call to answer an incoming cell call with call waiting.

3. HOME/FLASH:

Press to make or answer a home call. Press during a call to answer an incoming home call with call waiting.

4. M1:

Press repeatedly to add or remove '1' for caller ID entries. Press and hold to set or dial voicemail.

5. TONE X/a>A:

Press to switch to tone dialing. Press while entering names to change case.

6. SPEAKER:

Press to make or answer a call using the speakerphone. Press to switch between speakerphone and handset.

7. MUTE/DELETE:

Mute the microphone during a call. Mute the ringer when ringing. Delete entries or digits.

8. VOLUME UP/DOWN:

Adjust listening volume or message playback volume.

9. MENU/SELECT:

Display the menu. Select items or save settings.

10. OFF/CANCEL:

Hang up a call. Cancel operations or exit menus. Press and hold to exit to idle mode.

11. QUIET#:

Mute the ringer temporarily. Erase missed call indicator. Access dialing options. Enter QUIET mode settings.

12. CALL BLOCK/VOICE:

Activate voice-controlled application. Block incoming calls.

13. REDIAL/PAUSE:

View last 10 dialed numbers. Insert a dialing pause.

Handset Display Icons:

• Battery icon flashing: Low battery, needs charging.
• Battery icon animating: Battery is charging.
• Battery icon solid: Battery is fully charged.
• Ringer off icon: Handset ringer is turned off.
• VM icon: New voicemail from telephone service provider.
• Home line icon: Home line is in use.
• Bluetooth icon: Bluetooth device is paired and active.
• Bluetooth/Cell line icon: Bluetooth device/Cell line is in use.
• ANS ON: Answering system is turned on.
• ECO: ECO mode is active for power saving.
• NEW MSG #: Displays new/old messages.

Telephone Base Overview

1. Message window:

Indicates new answering system messages.

2. FIND HS:

Pages all handsets.

3. VOLUME UP/DOWN:

Adjust telephone base ringer volume or listening volume during call screening/message playback.

4. Controls (X, <<, >>, >>/||, >|/||):

Delete message, repeat message, play previous message, skip message, start/stop message playback, turn call screening on/off.

5. CELL 1 / CELL 2:

Connects to paired Bluetooth devices. Light indicates pairing status.

6. IN USE light:

Indicates handset or answering system activity.

7. ANS:

Turns the answering system on or off.

Initial Basic Settings

Date and Time

The handset will prompt to set the date and time upon installation or power restoration. To skip, press OFF/CANCEL.

Using a cordless handset:

1. MENU > ▼/▲ > Set date/time > SELECT.
2. Enter month (MM), day (DD), and year (YY) > SELECT.
3. Enter hour (HH) and minute (MM).
4. ▼/▲ > AM or PM > SELECT.

Voice Guide Setup

Follow the voice guide to set up Smart call blocker and the answering system.

• Smart Call Blocker: MENU > ▼/▲ > Smart call blk > SELECT > SELECT to choose SCB On/Off > ▼/▲ > On or Off > SELECT.
• Answering System: MENU > ▼/▲ > Answering sys > SELECT > ▼/▲ > Voice guide > SELECT.

Add a Bluetooth® Cell Phone/Headset

Pair and connect your Bluetooth device to the telephone base. Bluetooth technology operates within a 30-foot range; keep the device within 15 feet for optimal performance.

To pair and connect a cell phone using the telephone base:

1. Press and hold CELL 1 or CELL 2 until the light flashes.
2. Place the cell phone next to the base. Turn on Bluetooth on your cell phone and search for devices. Select your AT&T phone (AT&T DECT 6.0) and follow pairing instructions.

To pair and connect a headset using a cordless handset:

1. MENU > ▼/▲ > Bluetooth > SELECT.
2. ▼/▲ > Add BT headset > SELECT.
3. Set your headset to discoverable mode > Press SELECT.

Record Your Own Announcement

Using a cordless handset:

1. MENU > ▼/▲ > Answering sys > SELECT.
2. SELECT to select Announcement.
3. Press 7 to record.
4. Speak towards the handset and press 5 to end recording and save.

Number of Rings

Set the answering system to answer after 2, 3, 4, 5, or 6 rings. Toll saver option is available.

Using a cordless handset:

1. MENU > ▼/▲ > Answering sys > SELECT.
2. ▼/▲ > Ans sys setup > SELECT.
3. ▼/▲ > # of rings > SELECT.
4. ▼/▲ > choose 2, 3, 4, 5, 6, or Toll saver > SELECT.

Ringer Volume

Set ringer volume for home or cell calls to one of six levels, or turn off.

Using a cordless handset:

• Home calls: MENU > ▼/▲ > Ringers > SELECT > Home volume > SELECT > ▼/▲ to choose level > SELECT.
• Cell calls: MENU > ▼/▲ > Ringers > SELECT > Cell volume > SELECT > ▼/▲ to choose level > SELECT.

LCD Language

Using a cordless handset:

1. MENU > ▼/▲ > Settings > SELECT.
2. SELECT again to select LCD language.
3. ▼/▲ to choose English, Français, or Español > SELECT.

Note: If you accidentally change the language, press MENU in idle mode and enter *364# to reset to English.

Operate

Phonebook

The phonebook can store up to 1,000 entries, shared by all system devices.

Download a Cell Phone Phonebook

Ensure the cell phone is paired, active, and connected to your telephone.

1. MENU > ▼/▲ > Bluetooth > SELECT.
2. ▼/▲ > Phonebook download > SELECT.
3. Press SELECT to start downloading.

Bluetooth

Connect to Cell™ App

Download the Connect to Cell™ app from Google Play® Store for extended functionality (Caller ID manager, Alerts manager). Scan the QR code to download.

Remote Voice Control

Activate your cell phone's voice-controlled application (Siri®, Google Now™, S Voice®) using the handset or base.

Compatibility: Works with iOS (8+) and Android (4+).

Before using:

• Ensure your cell phone is paired and connected via Bluetooth.
• No other Bluetooth applications should be running.
• Keep your cell phone within 15 feet of the telephone base.
• Do not lock your cell phone's screen or set a passcode.
• Ensure you are logged into the applications you want to control (GPS, email, social media).
• Ensure your cell phone has a strong data or Wi-Fi signal and internet connection.
• Test the voice app on your cell phone.

To activate remote voice control:

1. Press VOICE.
2. If you have two connected cell phones, press ▼/▲ to select a device.
3. Speak towards the handset and wait for feedback. Reply as needed.
4. Press CANCEL to exit.

Note: If no cell phone is paired, pressing VOICE prompts "Pair cell first".

Caller ID

The telephone stores caller ID information for the last 50 incoming calls.

Review and Dial a Number in the Call Log

1. Press CID in idle mode > ▼/▲ to scroll through the list.
2. Press HOME/FLASH or /SPEAKER to dial (home line).
3. Press CELL to dial (cell line).

Erase Missed Calls Indicator

When "XX Missed calls" is shown, scroll the call log or press and hold OFF/CANCEL in idle mode.

Smart Call Blocker

Use Smart call blocker to screen incoming calls if you subscribe to caller ID service. This feature applies only to incoming home calls.

Turn Smart Call Blocker On or Off

Smart call blocker is on by default. To turn it on or off:

1. MENU > ▼/▲ > Smart call blk > SELECT.
2. Press SELECT to choose SCB On/Off.
3. ▼/▲ > On or Off > SELECT.

Notes:

• Smart call blocker screens home calls from numbers not in your phonebook, allow list, block list, or star name list.
• You can add numbers to your allow and block lists.
• If Smart call blocker is off, all calls will ring.
• When QUIET mode is on and Smart call blocker is in screening mode, screened calls go to the answering system.

Call Controls

Add Numbers from Caller ID Log

• To allow list: CID > ▼/▲ > SELECT > To Allow list > SELECT. Edit number/name if needed > SELECT.
• To block list: CID > ▼/▲ > SELECT > To Block list > SELECT. Edit number/name if needed > SELECT.
• To star name list: CID > ▼/▲ > SELECT > To Star name > SELECT.

Block the Caller While on a Call

During a call, press CALL BLOCK, then SELECT to end the call and add the number to the block list.

Unblock a Telephone Number

If a number is in the block list:

1. MENU > ▼/▲ > Smart call blk > SELECT.
2. ▼/▲ > Block list > SELECT.
3. Press SELECT > Review > ▼/▲ to browse entries.
4. When the entry displays, press MUTE/DELETE.
5. Press SELECT to confirm deletion.

Notes: Allow list stores up to 200 entries, block list up to 1,000, star name list up to 10.

Answering System

Your telephone has separate indicators for built-in answering system messages and telephone service provider voicemail.

Turn Answering System On or Off

The answering system must be on to answer and record messages.

Using a cordless handset:

1. MENU > ▼/▲ > Answering sys > SELECT.
2. ▼/▲ > Answer on/off > SELECT.
3. ▼/▲ > On or Off > SELECT.

The handset shows ANS ON when the system is on.

Using the telephone base:

Press ANS to turn the answering system on or off. The system announces "Calls will be answered" or "Calls will not be answered.".

Message Alert Tone

When enabled, the telephone base beeps every 10 seconds if there is at least one new message.

Using a cordless handset:

1. MENU > ▼/▲ > Answering sys > SELECT.
2. ▼/▲ > Ans sys setup > SELECT.
3. ▼/▲ > Msg alert tone > SELECT.
4. ▼/▲ > On or Off > SELECT.

Call Screening

Hear incoming messages as they are recorded. You can answer the call by pressing HOME/FLASH on the handset.

Using a cordless handset:

1. MENU > ▼/▲ > Answering sys > SELECT.
2. ▼/▲ > Ans sys setup > SELECT.
3. SELECT to select Call screening.
4. ▼/▲ > On or Off > SELECT.

Message Playback

Using the telephone base: Press / when in idle mode.

Using a cordless handset: Press MENU then SELECT when in idle mode.

For C-UL Compliance

This product complies with Canadian federal and provincial/territorial statutes and regulations.

Mesures de sécurité importantes

! This symbol alerts you to important information or instructions. Always follow safety measures to reduce risks of injury, fire, or electric shock.

Information relative à la sécurité

• Read and understand all instructions.
• Avoid using the telephone during a thunderstorm.
• Do not use the telephone near a gas leak.
• Do not use near water or when wet. Do not use cleaning liquids or sprays. Unplug cords if liquid contact occurs.
• Install in a protected location to prevent tripping hazards.
• If the product malfunctions, consult the Troubleshooting section of the user guide.

MISES EN GARDE:

Use only the included adapter. For replacements, visit telephones.att.com or call 1 (800) 222-3111 (1 (866) 288-4268 in Canada).

ATTENTION: Replace batteries with the same type. Dispose of used batteries properly. Disconnect telephone lines before replacing batteries.

Battery Use Conditions: Avoid extreme temperatures, incorrect battery types, disposal in fire, crushing, or exposure to high temperatures or low air pressure.

Use only the supplied rechargeable battery or replacement battery (model BT262661).

Spécifiquement en rapport avec les téléphones sans fil

• Confidentialité: Conversations are transmitted by radio waves and may be intercepted.
• Alimentation électrique: Base must be plugged into a functional electrical outlet not controlled by a wall switch.
• Interférences potentielles aux téléviseurs: Do not place the base near a TV or VCR.
• Piles rechargeables: Handle with care to avoid short circuits. Observe polarity. Dispose of safely.

Recycling: The RBRC Seal indicates voluntary participation in a recycling program for Ni-MH batteries. Take batteries to a participating retailer or recycling center. Call 1-800-8-BATTERY® for locations.

Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés

Stimulateurs cardiaques: Keep wireless telephones at least six inches from a pacemaker. Do not place the handset directly over the pacemaker. Use the handset on the ear opposite the pacemaker.

Mode ECO: ECO mode is activated automatically to reduce power consumption.

Answering Systems: For two-way recording, inform the other party that the call is being recorded.

CONSERVEZ CES INSTRUCTIONS

FCC Part 68 and ACTA

This equipment complies with FCC Part 68 and ACTA technical requirements. The product identifier is on the label. The plug and jack must comply with applicable Part 68 rules. The Ringer Equivalence Number (REN) determines the number of devices connectable to your telephone line. The sum of all RENs should not exceed five.

Do not use with Party Lines. Ensure alarm dialing equipment is not disabled. If malfunctioning, unplug from the modular jack. Replacement must be by the manufacturer or authorized agents.

If this equipment causes harm to the telephone network, the service provider may temporarily discontinue service. You will be notified and given an opportunity to correct the problem.

This product is hearing aid compatible.

If using memory dialing, store emergency numbers and remain on the line to explain the reason for the call. Perform such activities during off-peak hours.

Industry Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) no interference caused, and (2) acceptance of any interference received.

Privacy of communications may not be ensured.

The term "IC:" signifies compliance with Industry Canada technical specifications.

The REN for this terminal equipment is 0.1. The sum of RENs of all connected devices should not exceed five.

This product meets applicable Innovation, Science and Economic Development Canada technical specifications.

FCC Part 15

This equipment has been tested and found to comply with Class B digital device requirements under Part 15 of FCC rules. These requirements provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and radiates radio frequency energy. If not installed and used correctly, it may cause harmful interference to radio communications.

If interference occurs, try to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to a different circuit.
• Consulting a dealer or experienced radio/TV technician.

WARNING: Unauthorized modifications may void the user's authority to operate the equipment.

Limited Warranty

AT&T brands are used under license. This product has a one-year limited warranty. For warranty service or questions, visit telephones.att.com or call 1 (800) 222-3111 (1 (866) 288-4268 in Canada).

What does this limited warranty cover?

The manufacturer warrants the Product and accessories to be free from material defects in material and workmanship when installed and used normally, for consumers in the United States and Canada.

What will Advanced American Telephones do?

During the warranty period, Advanced American Telephones will replace a materially defective product, at their option, with a new or refurbished product. Replacement may take approximately 30 days.

How long is the limited warranty period?

One (1) YEAR from the date of purchase for most products. (SynJ® and Syn248® have a two-year warranty).

What is not covered?

The warranty does not cover damage from misuse, accident, improper installation, neglect, fire, water, unauthorized repair/alteration, signal conditions, non-AT&T accessories, removal of warranty stickers, use outside the US/Canada, commercial/institutional use, or missing proof of purchase.

How to get warranty service?

Visit telephones.att.com or call 1 (800) 222-3111 (1 (866) 288-4268 in Canada). Check the user's manual before calling.

What must you return with the PRODUCT?

Return the entire original package and contents with a description of the malfunction, valid proof of purchase (sales receipt with product model and date), your name, mailing address, and telephone number.

Other limitations

This warranty is the complete agreement. No other warranties are provided. No one is authorized to make modifications. State/Provincial law rights may vary. Implied warranties are limited to one year. Advanced American Telephones is not liable for indirect, special, incidental, consequential, or similar damages.

Please retain your original sales receipt as proof of purchase.

Technical Specifications

* Operating times vary depending on actual use and battery age.

Company: Advanced American Telephones

Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States.

Phone: 1 (800) 222-3111 (US) or 1 (866) 288-4268 (Canada)

Compatible with Hearing Aid T-Coil (TIA-1083): Telephones with this logo have reduced noise and interference with T-coil equipped hearing aids and cochlear implants.

ENERGY STAR®: This product features an ENERGY STAR® qualified power adapter.

Trademarks: Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. AT&T and AT&T logo are trademarks of AT&T Intellectual Property. Siri® is a registered trademark of Apple Inc. Android® is a registered trademark of Google Inc. Connect to Cell™ is a trademark of Advanced American Telephones. Google Now™ is a trademark of Google Inc. iOS is a trademark of Cisco. Qaltel™ is a trademark of Truecall Group Limited. S Voice® is a registered mark of Samsung Electronics Co., Ltd. SynJ® and Syn248® are trademarks of Advanced American Telephones. RBRC Seal and 1-800-8-BATTERY® are registered trademarks of Call2recycle, Inc.

Printed in China. Issue 2.0 AT&T 10/21.