Connectors
The single dock features two primary connectors:
- Debug connector: Used for debugging purposes. (Also labeled in German: Debug-Anschluss, Spanish: Conector de depuración, French: Connecteur de débogage, Italian: Connettore di debug, Japanese: デバッグ コネクタ, Korean: 디버그 커넥터, Portuguese: Conetor de depuração, Russian: Отладочный разъем, Turkish: Hata ayıklama konektörü, Chinese: 调试接口 / 除錯接頭)
- USB host connector: Used for connecting USB devices. (Also labeled in German: USB Host-Anschluss, Spanish: Conector USB host, French: Connecteur d'hôte USB, Italian: Connettore host USB, Japanese: USB ホスト コネクタ, Korean: USB 호스트 커넥터, Portuguese: Conetor de anfitrião USB, Russian: Разъем USB-хост, Turkish: USB sunucu konektörü, Chinese: USB 主机接口 / USB 主機端接頭)
Diagram Description: An illustration shows the single dock with arrows pointing to the locations of the Debug connector and the USB host connector, with cables attached.
Power Supply Requirements
Use only a UL Listed power supply that has been qualified by Intermec/Honeywell. The power supply must have an output rated at 12 VDC and 2.5 A, and be used with an appropriate AC power cord.
Diagram Description: Two illustrations show how to place the CK65/CK3 mobile computer into the single dock.
Electrical Rating: 12 VDC, 2.5 A, 30W
Charging Status Indicators
The dock indicates the charging status and battery condition:
- Green Indicator: Battery charge is greater than 97%. ✔️
- Red Indicator: Battery charge is less than 97%.
- Orange/Yellow Indicator: Battery temperature is outside the optimal operating range.
- Blue Indicator: Battery temperature is within the optimal range (5°C to 35°C / 41°F to 95°F).
- Blue Indicator with Up Arrow: Battery temperature is above 35°C (95°F).
Note: For detailed restrictions associated with this product, consult the Compliance Insert.
Support and Documentation
For solutions, technical support, or to report a problem, visit the Honeywell Technical Support Portal:
Product documentation is available at:
Limited Warranty
For warranty information, visit www.honeywellaidc.com and navigate to Resources > Product Warranty.
Patents
For patent information, visit:
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes to specifications and other information in this document without prior notice. Readers should consult HII to determine if any changes have been made. The information in this publication does not represent a commitment by HII.
HII is not liable for technical or editorial errors or omissions, or for incidental or consequential damages resulting from the use of this material. HII disclaims responsibility for the selection and use of software and/or hardware to achieve intended results.
This document contains proprietary, copyrighted information. All rights reserved. No part of this document may be reproduced or translated without prior written consent from HII.
Copyright © 2016-2020 Honeywell International Inc. All rights reserved.
