Instructions for VIKING models including: VK1815 Pixel Dot, LED Bar Light, VK1815, Pixel Dot LED Bar Light, VK1815 Pixel Dot LED Bar Light
Viking Stage Lighting
Instructions Control Panel Menu Options Menu Value Function A001 001-512 Dmx Address 29ch/11ch/119h/109h Number of Dmx Channels required Dmx Mode CC00 01-99 (value changes speed) Colour snap Chase Ed00 01-99 (value changes speed) Colour gradient chase & pulse Er00 01-99 (value changes speed) Colour run fx 1 Po00 01-99 (value changes speed) Colour run fx 2 Tr00 01-21 (value changes effect prog) Run fx TU00 01-99 (value changes effect prog) Run fx Speed Control BE50 01-08 (value changes effect prog) R200 0-255 Brightness of RED Led G200 0-255 Brightness of GREEN Led B200 0-255 Brightness of BLUE Led W200 0-255 Brightness of WHITE Led Y200 0-255 Brightness of AMBER Led P200 0-255 Brightness of UV Led ID01 01-14 Unit ID [MENU] Main menu to select or return to the previous menu [UP] Menu selection or parameter increase [DOWN] Menu selection or parameter decrease [ENTER] OK / enter or select sub menu Please NOTE: To use the unit on DMX, first enter start address on the Control Panel, for example a start address of 1 would read A001 or a start address of 34 would read A034. It is vital that this is showing on the Red Control panel display otherwise the unit is in manual mode and will not respond to DMX. Furthermore having set the number you MUST press ENTER to store the address otherwise when the unit is powered off and on again it will not recall its address - this also applies to all manual modes - ie select G255 will set the brightness of the green LEDs to full, but you MUST press ENTER to save this value for recall next time power is applied. 11 Channel Mode Channel 1 Dimmer 2 Strobe 3 Built in Programs 4 FX Background Programs 5 Speed 6 RED 7 GREEN 8 BLUE 9 WHITE 10 AMBER 11 UV Value 0-255 0-255 0-25 26-35 36-45 (Speed-Ch5 brightness-Ch1) 46-55 (Speed-Ch5 brightness-Ch1) 56-65 (Brightness-Ch1) 66-75 (Speed-Ch5 brightness-Ch1) 76-85 (Speed-Ch5 brightness-Ch1) 86-95 (Speed-Ch5 brightness-Ch1) 96-105 (Speed-Ch5 brightness-Ch1) 106-115 (Speed-Ch5 brightness-Ch1) 116-125 (Speed-Ch5 brightness-Ch1) 126-135 (Speed-Ch5 brightness-Ch1) 136-145 (Speed-Ch5 brightness-Ch1) 146-155 (Speed-Ch5 brightness-Ch1) 156-165 (Speed-Ch5 brightness-Ch1) 166-175 (Speed-Ch5 brightness-Ch1) 176-185 (Speed-Ch5 brightness-Ch1) 186-195 (Speed-Ch5 brightness-Ch1) 196-205 (Speed-Ch5 brightness-Ch1) 206-215 (Speed-Ch5 brightness-Ch1) 216-225 (Speed-Ch5 brightness-Ch1) 236-245 (Speed-Ch5 brightness-Ch1) 246-255 (Set sensitivity in main menu BE50) 0-30 31-45 (Speed-Ch5 brightness-Ch1) 46-60 (Speed-Ch5 brightness-Ch1) 61-74 (Speed-Ch5 brightness-Ch1) 75-89 (Speed-Ch5 brightness-Ch1) 90-104 (Speed-Ch5 brightness-Ch1) 105-119 (Speed-Ch5 brightness-Ch1) 120-134 (Speed-Ch5 brightness-Ch1) 135-149 (Speed-Ch5 brightness-Ch1) 150-164 (Speed-Ch5 brightness-Ch1) 165-179 (Speed-Ch5 brightness-Ch1) 180-194 (Speed-Ch5 brightness-Ch1) 195-209 (Speed-Ch5 brightness-Ch1) 210-224 (Speed-Ch5 brightness-Ch1) 225-239 (Speed-Ch5 brightness-Ch1) 240-255 (Speed-Ch5 brightness-Ch1) 000-255 000-255 000-255 000-255 000-255 000-255 000-255 Function Master Dimmer : 0 to full Master Strobe : slow to fast No Effect ; colour select on Ch6-11 All Led off Snap colour flow (Select colour Ch6-11) Fade colour flow (Select colour Ch6-11) Static all LED on (Select colour Ch5) Snap change all led colour Fade change all led colour Running Fx1 Running Fx2 Running Fx3 Running Fx4 Running Fx5 Running Fx6 Running Fx7 Running Fx8 select colours Ch6-11 Running Fx9 select colours Ch6-11 Running Fx10 select colours Ch6-11 Running Fx11 select colours Ch6-11 Running Fx12 select colours Ch6-11 Running Fx13 select colours Ch6-11 Running Fx14 select colours Ch6-11 Running Fx15 select colours Ch6-11 Sound activated program (set BE>0) No Function Run Fx 1 - background Ch6-11 Run Fx 2 - background Ch6-11 Run Fx 3 - background Ch6-11 Run Fx 4 - background Ch6-11 Run Fx 5 - background Ch6-11 Run Fx 6 - background Ch6-11 Run Fx 7 - background Ch6-11 Run Fx 8 - background Ch6-11 Run Fx 9 - background Ch6-11 Run Fx 10 - background Ch6-11 Run Fx 11 - background Ch6-11 Run Fx 12 - background Ch6-11 Run Fx 13 - background Ch6-11 Run Fx 14 - background Ch6-11 Run Fx 15 - background Ch6-11 Program speed/colour Slow - Fast Red Master Dimmer Green Master Dimmer Blue Master Dimmer White Master Dimmer Amber Master Dimmer UV Master Dimmer 108 Channel Mode+ Full Pixel Mapping but without built in programs on DMX Channel Value 1 RED 1 0-255 2 GREEN 1 0-255 3 BLUE 1 0-255 4 WHITE 1 0-255 5 AMBER 1 0-255 6 UV 1 0-255 7 RED 2 0-255 8 GREEN 2 0-255 9 BLUE 2 0-255 10 WHITE 2 0-255 11 AMBER 2 0-255 12 UV 2........................ 0-255 ........... In groups 6 channels of (RGBWA &UV) 107 AMBER 18 0-255 108 UV 18 0-255 119 Channel Mode Suitable for using built in programs on DMX as well as pixel mapping Channels 1-11 as per 11 Channel Mode Thereafter each 6 channels: RED 1 GREEN 1 BLUE 1 WHITE 1 AMBER 1 UV 1 RED 2 GREEN 2 BLUE 2 WHITE 2 AMBER 2 UV2 Etc..... till UV18 Please NOTE: Function 1st LED 2nd LED Etc.......................... 29 Channel Mode Suitable for using built in programs on DMX as well as pixel mapping with small channel count Channels 1-11 as per 11 Channel Mode Thereafter ch12-29 controls each led 1-18 individually, each channel selecting colour of the pixel dot 12 LED 1 13 LED 2 14 LED 3......... 28 LED 17 29 LED 18 Sound Activation In Stand Alone Mode option BE00 in Menu must be set to a sensitivity level greater than zero - a setting of BE99 makes the unit most sensitive to sound. At BE00 setting Sound Activation is set to OFF,In DMX mode the unit needs to be set to 11 channel mode to access sound activation on Channel 3 - this channel bust be set to a DMX level of 246 or above in order to be sound activated DMX Signal The Menu must Display A001 (ie the start DMX address) for the unit to work on DMX signals from a controller. If there is no DMX signal being received by the unit the Display will flash the DMX address and will only remain permanently on once a DMX signal is being received by the light. Temperature of Unit To display the temperature of the unit press and hold down the ENTER button on any menu option other than A001 (DMX start address) and the unit will display it (ie 25°C)whilst the button is depressed.gDoc Creator Ver 4.0