Instruction Manual for luminii models including: Plexineon Fixture Catenary Mount Static Color, Fixture Catenary Mount Static Color, Catenary Mount Static Color, Mount Static Color, Static Color
Plexineon Rings Catenary Static Color - Luminii
Plexineon Catenary Static Color - Luminii
File Info : application/pdf, 5 Pages, 1.06MB
DocumentDocumentInstallation Instructions - Plexineon Catenary Static Color Models: Plexineon Fixture Catenary Mount Static Color and Plexineon Rings Catenary Mount Static Color Please read all instructions prior to installation and keep for future reference! 1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN. 2. USE ONLY WITH CLASS 2 POWER UNIT 3. 24 VOLTS DC 4. SUITABLE FOR WET LOCATIONS 5. CATENARY MOUNT ONLY REV0.1 10252022 1 / 5 7777 Merrimac Ave Niles, IL 60714 T 224.333.6033 F 224.757.7557 info@luminii.com www.luminii.com Plexineon Straight Run Fixture Catenary Mount Plexineon Ring Catenary Mount *LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE Installation Instructions - Plexineon Catenary Static Color Models: Plexineon Fixture Catenary Mount Static Color and Plexineon Rings Catenary Mount Static Color Please read all instructions prior to installation and keep for future reference! 1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN. 2. USE ONLY WITH CLASS 2 POWER UNIT 3. 24 VOLTS DC 4. SUITABLE FOR WET LOCATIONS 5. CATENARY MOUNT ONLY REV0.1 10252022 2 / 5 7777 Merrimac Ave Niles, IL 60714 T 224.333.6033 F 224.757.7557 info@luminii.com www.luminii.com 1 NOTE: Prior to installation all 24VDC wires must be present within 72" of the installation. Refer to the power supply installation instruction for additional information. NOTE: More than one person is recommended for this installation. 1.1 mounting frame joiner screw NOTE: This step is only for multi-piece frames. If you have single piece frame, skip to step 2.1. mounting clip mounting frame 1.1 For multi-piece frames, connect the frame members together with mounting frame joiner. Use locknuts to secure connection. 2 2.1 plexineon fixture mounting frame mounting clip 2.1 Install plexineon fixture to mounting clips on mounting frame(s). *LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE Installation Instructions - Plexineon Catenary Static Color Models: Plexineon Fixture Catenary Mount Static Color and Plexineon Rings Catenary Mount Static Color Please read all instructions prior to installation and keep for future reference! 1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN. 2. USE ONLY WITH CLASS 2 POWER UNIT 3. 24 VOLTS DC 4. SUITABLE FOR WET LOCATIONS 5. CATENARY MOUNT ONLY Install Fixtures into Mounting Clips A.1 mounting clip A.2 REV0.1 10252022 3 / 5 7777 Merrimac Ave Niles, IL 60714 T 224.333.6033 F 224.757.7557 info@luminii.com www.luminii.com mounting clip installation tool on grip A.1 Make an U shape with mounting clip installation tool, insert two edges into mounting clip. Place plexineon fixture insde the shape. Then push the fixture into clip. A.2 Remove the tool. Make sure mounting clip is clipped right on the grip. 3 3.1 turnbuckle u-bracket 3.2 mounting frame plexineon fixture turnbuckle set screw u-bracket mounting clip 3.3 bolt set screw 3.1 Unscrew and remove uchain from turnbuckle. 3.2 Cauculate points for turnbuckles on mounting frame. Set uchain to measured place. 3.3 Screw bolt back into uchain to lock the turnbuckle with mounting frame, securing the position by set screw. *LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE Installation Instructions - Plexineon Catenary Static Color Models: Plexineon Fixture Catenary Mount Static Color and Plexineon Rings Catenary Mount Static Color Please read all instructions prior to installation and keep for future reference! 1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN. 2. USE ONLY WITH CLASS 2 POWER UNIT 3. 24 VOLTS DC 4. SUITABLE FOR WET LOCATIONS 5. CATENARY MOUNT ONLY 4 locknut 5 saddle 4.1 REV0.1 10252022 4 / 5 7777 Merrimac Ave Niles, IL 60714 T 224.333.6033 F 224.757.7557 info@luminii.com www.luminii.com catenary cable turnbuckle u-bolt NOTE: Catenary cables are provided by others. Max Ø1/4". 4.1 Loosen locknuts to remove the U-bolt. Place the catenary cable between the saddle and u-bolt. Use locknuts to clamp the catenary cable between the saddle and u-bolt. Do this for all rope clips. catenary cable 5.1 turnbuckle mounting frame plexineon fixture 5.1 After installing plexineon with catenary cable, adjust the length by rotating the middle part of turnbuckle. NOTE: Turnbuckle is adjustable up to 2.5" vertically. *LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE Installation Instructions - Plexineon Catenary Static Color Models: Plexineon Fixture Catenary Mount Static Color and Plexineon Rings Catenary Mount Static Color Please read all instructions prior to installation and keep for future reference! 1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN. 2. USE ONLY WITH CLASS 2 POWER UNIT 3. 24 VOLTS DC 4. SUITABLE FOR WET LOCATIONS 5. CATENARY MOUNT ONLY 2 2.1 Connect +24 VDC strip color from 2.1 the Plexineon to the power supply +24 VDC red wire. Connect -24 VDC solid color wire from the Plexineon to power supply -24 VDC black wire. REV0.1 10252022 5 / 5 7777 Merrimac Ave Niles, IL 60714 T 224.333.6033 F 224.757.7557 info@luminii.com www.luminii.com Multiple Fixtures to Plexineon Plexineon fixture Plexineon fixture Plexineon fixture *LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE