SunnyFit：Free Home Fitness App
User Manual for SUNNY HEALTH and FITNESS models including: SF-T723030 Premium Foldable Auto Incline Smart Treadmill, SF-T723030, Premium Foldable Auto Incline Smart Treadmill, Foldable Auto Incline Smart Treadmill, Auto Incline Smart Treadmill, Incline Smart Treadmill, Smart Treadmill, Treadmill
Premium Foldable Auto Incline Smart Treadmill with 20" Running Deck | Sunny Health & Fitness | Sunny Health and Fitness
File Info : application/pdf, 20 Pages, 1.32MB
DocumentDocumentFOLDABLE AUTO INCLINE TREADMILL WITH 20'' RUNNING BELT & BRUSHLESS MOTOR SF-T723030 USER MANUAL IMPORTANT! Please retain owner's manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance). DANGER To reduce the risk of electric shock and the injury from moving parts: Always unplug this appliance from the electrical outlet immediately after using and before cleaning or serving. WARNING To reduce the risk of burns, fire, electric shock, or injury to persons: 1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this machine. 3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair. 5. Do not carry this appliance by supply cord or use cord as a handle. 6. Keep the cord away from heated surfaces. 7. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like. 8. Never drop or insert any object into any opening. 9. Do not use outdoors. Household use only. 10. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 11. To disconnect, turn all controls to the off position, then remove plug from outlet. 12. CAUTION: Risk of Injury to Persons To Avoid Injury, use extreme caution when stepping onto or off of a moving belt. Read Instruction Manual Before Using. 13. Connect this appliance to a properly grounded outlet only. See Grounding Instructions. 14. REMOVE CONTROL BOX (OR KEY, OR SAFETY PIN, AS APPLICABLE) WHEN NOT IN USE, AND STORE OUT OF REACH OF CHILDREN. SAVE THESE INSTRUCTIONS 1 IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk, or prevent you from using the equipment properly. Your physician's advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level. 2. Be aware of your body's signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program. 3. Keep children and pets away from the equipment. The equipment is designed for adult use only. 4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 8 feet (240cm) of free space behind it and 2 feet (60cm) on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill. 5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear. 6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified. 7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment. 8. Do not place fingers or objects into the moving parts of the equipment. 9. The maximum weight capacity of this unit is 300 lbs (135 kgs). 10. The equipment is not suitable for therapeutic use. 11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving is required. 12. Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold, hot or damp areas as this may lead to corrosion and other related problems. 13. This equipment is designed for indoor and home use only; it is not intended for commercial use! IMPORTANT NOTE: The running belt must be lubricated before the first use! Please see Page 7 for instructions on how to properly apply lubricant. 2 PRE-ASSEMBLY CHECK LIST Before you start to assemble, please make sure all parts are included. No. Description A Frame Assembly 84 Bottle Holder 109 Safety Key 110 Allen wrench B Lubricant Oil C Thank You Card D Manual Spec. 6mm*80mml*130mml Qty. 1 2 1 1 1 1 1 Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: The model number (found on cover of manual) The product name (found on cover of manual) The part number found on the "EXPLODED DIAGRAM" (page 17) and "PARTS LIST" (page 18) Please contact us at support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669). 3 ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877907-8669). STEP 1: We recommend having two people to remove the product from the carton. Open the carton and take out the contents. Place the product on a level surface in a clean, spacious work area. STEP 2: H Lift the Handlebar (No. H) and upright frames fully upward. Then, pull down the Handlebar (No. H) towards Direction A until the pin locks. Note: Be careful not to pinch your fingers when pulling down the Handlebar (No. H) and locking it. Also, ensure the tension cable that connects Handlebar (No. H) and upright frames doesn't get jammed. Locking System: Please ensure the upright frames are fully flipped upward. Then, keep them in that position and pull down the Handlebar (No. H) until you hear a click to lock the upright frames in place. A 4 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877907-8669). 84 STEP 3: Insert the Bottle Holders (No. 84) into the place. Tighten the Bottle Holders (No. 84) clockwise. Open the Tablet Holder 1(No. 86) to use. Insert 86 the Safety Key (No. 109) before starting to use. IMPORTANT NOTE: The Running Belt (No. 28) must be lubricated before the first use! Please see the Page 7 for instructions on how to properly apply lubricant. 5 MAINTENANCE & CARE General cleaning will help prolong the life and improve the performance of your treadmill. Keep the treadmill clean and maintained by dusting the components on a regular basis. Cleaning the two exposed sides both sides of the Running Belt (No. 28) will prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from your shoes does not wear out the Running Board (No. 29) and Running Belt (No. 28). Clean the surface of the Running Belt (No. 28) with a clean damp cloth. Keep liquids away from electrical parts and Running Belt (No. 28). To better maintain the treadmill and prolong its life, it is suggested that the treadmill is powered off for 10 minutes every 2 hours and fully powered off whenever not in use. CENTERING THE RUNNING BELT: Place the treadmill on level ground and set it at 3-5mph to check if the Running Belt (No. 28) drifts from the center. Adjust the Running Belt (No. 28) according to below instructions with Allen Wrench (No. 110). 1. If the Running Belt (No. 28) moves to the right, turn the Right adjustment bolt ¼ turn clockwise, then turn the left adjustment bolt ¼ turn counter- clockwise. If the Running Belt (No. 28) does not move, keep adjusting ¼ turn at a time until it centers. Refer to Fig. A. Fig. A 28 110 2. If the Running Belt (No. 28) moves to the left, turn the Left adjustment bolt ¼ turn clockwise, then turn the right adjustment bolt ¼ turn counter- clockwise. If the Running Belt (No. 28) does not move, keep adjusting ¼ turn at a time until it centers. Refer to Fig. B. Fig. B 28 110 3. Over time the Running Belt (No. 28) will loosen. To tighten the running belt, turn the Left & Right adjustment bolts one full turn clockwise, check the tension of the Running Belt (No. 28). Continue this process until the Running Belt (No. 28) is at the correct tension. Make sure to adjust both sides equally to ensure correct Running Belt (No. 28) alignment. Refer to Fig. C. Fig. C 28 110 6 LUBRICATING THE TREADMILL *IMPORTANT NOTE: This treadmill does come pre-lubricated, but it is recommended to lubricate your treadmill before the first use. RUNNING BELT & TREADMILL LUBRICANT: Lubricating the Running Board (No. 29) and Running Belt (No. 28) is essential as the friction affects the life span and operation of the treadmill. Inspect the Running Board (No. 29) and Running Belt (No. 28) regularly. If you find any wear on the Running Board (No. 29), please contact us at: support@sunnyhealthfitness.com. WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing the unit. HOW TO LUBRICATE: 1. Raise the Running Belt (No. 28) up on one side and apply lubricant to the Running Board (No. 29). Use a rag to thoroughly wipe the lubricant over the running board. Repeat this process for the other side. 2. The moving parts should turn freely and quietly. Abnormality of moving parts will affect the safety of the equipment. Inspect and tighten bolts regularly. 3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be done on a regular basis. 4. DO NOT LOOSEN OR MAKE ANY ADJUSTMENTS TO THE RUNNING BELT WHILE APPLYING LUBRICANT. A loose Running Belt (No. 28) will result in the runner sliding off during use, while too tight of a Running Belt (No. 28) will negatively affect the motor's performance and also create more friction between the roller and Running Belt (No. 28). The most suitable tightness for the Running Belt (No. 28) is when it is pulled out 50-75mm from the Running Board (No. 29). The following time table is recommended: Light user (less than 3 hours/ week) every five months Medium user (4-7 hours/ week) every two months Heavy user (more than 7 hours/ week) every month 7 FOLDING FOLDING INSTRUCTIONS STEP 1: Set the incline to flat (Incline Level 0) and turn off the power. A STEP 2: Press both triggers on each side of "A," then lift the handlebar fully upward to unlock the upright frames. Step 3: Hold the handlebar and laydown the upright frames. 8 UNFOLDING: A STEP 1: Lift the handlebar and upright frames fully upward. STEP 2: Then, pull down the handlebar until the pin locks. Note: Be careful not to pinch your fingers when pulling down the handlebar and locking it. Also, ensure the tension cable that connects handlebar and upright frames doesn't get jammed. Locking System: Please ensure the upright frames are fully flipped upward. Then, keep them in that position and pull down the handlebar until you hear a click to lock the upright frames in place. HOW TO MOVE THE TREADMILL Note: Before attempting to move the treadmill, make sure that it has been properly folded. Unplug the power cord. To transport, place two hands at the end of foot rails, hold position "P" and lift up, the treadmill and move the treadmill with Transportation Wheels (No. 2) in front. 2 P 9 IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 15 amps (100-120V) in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before powering the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user. GROUNDING METHODS: This product must be grounded. Should the treadmill malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Ensure that the product is connected to an outlet with the same configuration as the plug. Do not use an adaptor for this product. This product is for use on a nominal 100-120V circuit and has a grounding plug that looks like the plug illustrated in sketch A. DANGER: Improper connection of the equipment can result in risk of electric shock. Check with a qualified electrician or serviceman if you are unsure whether the product has been properly grounded. Do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. WARNING! 1. NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from all moving parts of the treadmill, including the elevation mechanism and transportation wheels. 2. NEVER operate the treadmill using a generator or UPS power supply. 3. NEVER remove any cover on this treadmill without first disconnecting the power cord. 4. NEVER expose the treadmill to rain or moisture. This treadmill is not designed for outdoor use or use in any high humidity environment. (A) 10 EXERCISE INSTRUCTIONS GETTING STARTED: Before starting any exercise program, you should consult with your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Be aware of your body's signals. Incorrect or excessive exercise can damage your health. Stop exercising immediately if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. Get to know your treadmill. Before attempting to use the treadmill take some time to stand alongside and familiarize yourself with the controls. 1. Turn on the power switch. 2. Once you get on, you can stand with your feet on the side rails and stabilize yourself by holding onto the handlebars. 3. Next, attach the clip end of the Safety Key (No. 109) to your clothes and insert the magnetic end of the Safety Key (No. 109) into the Film of Console and Console Set (No. 107 and 108). 4. Press the START key to start the treadmill. 5. The treadmill will start at the system default setting speed of 0.6 MPH. When you feel comfortable, you may slowly increase this speed. 6. When you are finished with your exercise, press the STOP key to stop the treadmill or you can remove the magnetic end of the Safety Key (No. 109) to stop the treadmill. 11 THE DISPLAY CONSOLE BLUETOOTH : 1. The Bluetooth icon will flash when the console is on or wakes from power saving mode. If no Bluetooth connection is established within 3 minutes, the Bluetooth icon will turn off. 2. The Bluetooth icon will stay on when it is connected. WIRELESS HEART RATE : 1. The wireless heart rate icon will stay on when the heart rate monitor is connected. 2. The console can be connected to the heart rate monitor at any time except manual disconnect the heart rate monitor or in SLEEP MODE. 3. The wireless heart rate icon will flash when the console is on. If the heart rate monitor is not connected within 3 minutes, the wireless heart rate icon will turn off. NOTE: The heart rate monitor is not included. Wireless heart rate function works with SunnyFit Heart Rate Monitor HR200. DISPLAY FUNCTION 1. Incline / Time display window shows the incline value and the time count-down and count-up when in running state. 2. Distance /Steps display window shows distance count-down and count-up when in running state and the steps number. 3. Calories / Heart rate display window shows calories count-down and count-up when in running state and heart rate. 4. Speed display window showing current speed value. KEY FUNCTION 1. START: Press to start up the treadmill in the stop state. The default speed displayed is 0.6 MPH. 2. PAUSE / STOP: When the treadmill is running, press PAUSE / STOP once to pause the treadmill. When the treadmill is paused, press PAUSE / STOP to stop the treadmill, and all values will be cleared. In the STOP state, press and hold this button for 6 seconds to disconnect the heart rate monitor. To reconnect the heart rate monitor, press and hold this button for 6 seconds again. 3. INCLINE + / INCLINE -: When the treadmill is running, press to increase or decrease the incline. Value increases or decreases in increments of 1%. When setting program parameters, press to increase or decrease the set value. If you press and hold for 0.5 seconds, values will increase or decrease quickly. 4. SPEED+ / SPEED -: In setting state, press to increase or decrease the set value. When the treadmill is running, press to increase or decrease the speed. Value increases or decreases in increments of 0.1 MPH. After holding for more than 0.5 seconds, automatic continuous acceleration and deceleration will occur. 12 5. MODE: In standby mode to switch 3 count-down mode: time countdown, distance countdown, calories countdown. 6. PROGRAM: Press to choose Program. 7. USER: Press to choose User 1 or User 2 or User 3. 8. SPEED SHORTCUT KEYS: Press to select 3/6/9 MPH when the treadmill is running. 9. INCLINE SHORTCUT KEYS: Press to select 3/6/9 incline level when the treadmill is running. DATA DISPLAY RANGE AND SETTING RANGE OF VARIOUS PARAMETERS: SPEED(MPH) TIME(MIN) DISTANCE(ML) CALORIESCAL INCLINEINCL STEPS HEART RATE DISPLAY RANGE 0.6~10.0 0:00~99:59 0~99.9 0-999 0-15 0-9999 50-195 PROGRAM DEFAULT 3000 MODE DEFAULT 3000 1.0 50 SET RANGE 1:00~99:00 1.0~99.9 10-990 0-15 MANUAL MODE: 1. Press START, and the treadmill will start operating. The speed window will display "3,2,1" at the same time. The initial speed is 0.6 MPH. 2. Press SPEED + / SPEED or speed shortcut keys to adjust speed. 3. Press INCLINE +/ INCLINE or incline shortcut keys to adjust the incline. 4. When the treadmill is running, press PAUSE / STOP to pause / stop the treadmill. 5. To stop the treadmill immediately, remove the Safety Key (No. 109). SET UP COUNTDOWN MODE 1. Turn on the treadmill. The treadmill will be in standby mode. Press MODE key to select time countdown mode, distance countdown mode, or calories countdown mode. Press START to start the treadmill. 2. To set countdown mode: a. In manual mode, press MODE key to enter time countdown mode. The initial time is 30:00. Set countdown time by pressing SPEED + / SPEED - or INCLINE + / INCLINE -. Time setting range: 1:00 - 99:00. Value is in increment of 1 min. Press START to start the treadmill. If you do not press START key and you press MODE key again, the time value you set will be cleared and treadmill will go into distance countdown mode. b. Press MODE key to enter distance countdown mode. The initial distance is 1.0 MI. Set the distance by pressing SPEED + / SPEED or INCLINE + / INCLINE . Distance setting range: 1.0 99.9 MI. Value is in increment of 0.1 mile. Press START to start the treadmill. If you do not press START key and you press MODE key again, the distance value you set will be cleared and treadmill will go into calories countdown mode. c. Press MODE key to enter calories countdown mode. The initial calories will be displayed as 50.0 kcal. Set the calories by pressing SPEED + / SPEED or INCLINE + / INCLINE . Calories setting range: 10 - 990 kcal. Value increases in increment of 10 kcal. Press START to start the treadmill. If you do not press START and you press MODE key again, the calories value you set will be cleared and treadmill will go into standby mode. 13 SET UP PROGRAM: (Speed is in MPH) Press "P"program key to select a mode from P01 to P24, and use the SPEED+ / -or INCLINE + / - key to set the time (time range: 1:00 ~ 99:00, default: 30: 00), press the START key to execute the program, the treadmill moves according to the fixed program preset value, the Time changes once every interval (Time/10) *60 seconds, the speed can be adjusted through the SPEED+ / SPEED- keys, shortcut keys, the INCLINE can also be adjusted through the INCLINE +./ INCLINE- or incline shortcut keys.but the program default value is restored in the next section of the program. Each program changes 10 paragraphs (see fixed program table for fixed program values). Press START to start, or STOP to exit. Section Program 1 P1 SPEED INCLINE 2 0 P2 SPEED INCLINE 2 0 P3 SPEED INCLINE 2 0 P4 SPEED INCLINE 2 3 P5 SPEED INCLINE 3 2 P6 SPEED INCLINE 3 1 P7 SPEED INCLINE 3 2 P8 SPEED INCLINE 3 0 P9 SPEED INCLINE 4 0 P10 SPEED INCLINE 4 1 P11 SPEED INCLINE 4 9 P12 SPEED INCLINE 4 4 P13 SPEED INCLINE 2 5 P14 SPEED INCLINE 2 1 P15 SPEED INCLINE 3 4 P16 SPEED INCLINE 3 5 P17 SPEED INCLINE 3 4 P18 SPEED INCLINE 3 3 P19 SPEED INCLINE 4 2 P20 SPEED INCLINE 4 3 P21 SPEED INCLINE 4 3 P22 SPEED INCLINE 4 3 P23 SPEED INCLINE 2 0 P24 SPEED INCLINE 2 0 SET UP TIME / 10 = RUNNING TIME FOR EACH SECTION 2 3 4 5 6 7 8 2 3 4 5 3 4 5 7 7 6 6 5 5 4 3 4 5 6 4 6 6 3 3 5 5 7 7 9 4 4 6 6 4 7 7 5 5 5 6 8 5 5 5 5 6 6 6 6 4 2 3 4 5 6 3 3 3 5 7 6 6 8 5 2 3 4 5 6 4 4 8 8 7 8 6 8 6 2 3 4 5 6 2 5 4 6 6 8 6 8 7 3 4 5 6 7 8 7 5 6 7 8 8 7 8 3 3 5 5 7 7 9 7 3 7 7 7 8 8 2 2 3 3 2 2 3 5 3 8 8 8 8 8 3 5 6 5 4 3 3 8 6 8 7 6 6 8 8 7 6 5 4 3 3 4 7 8 2 8 8 8 4 2 2 3 2 2 2 4 4 6 6 4 7 7 5 8 7 5 5 6 9 5 5 6 6 6 6 4 1 2 3 4 5 5 4 3 5 7 6 6 8 5 5 6 7 7 6 5 4 8 8 7 8 6 8 6 4 3 2 1 1 2 3 4 6 6 8 6 8 7 5 6 7 7 6 5 4 5 6 7 8 8 7 8 5 5 7 5 5 3 3 7 3 7 7 7 8 8 2 2 2 3 3 3 2 5 3 8 8 8 8 8 3 4 5 6 7 8 5 8 6 8 7 6 6 8 4 5 5 4 3 3 4 4 7 8 2 8 8 8 3 3 3 4 4 4 5 2 3 4 5 3 4 5 4 4 3 3 2 2 5 3 4 5 6 4 6 6 5 5 3 3 5 5 3 9 10 5 3 4 3 6 4 9 7 7 4 5 3 4 2 2 1 5 8 6 5 4 2 6 5 5 6 3 4 4 7 9 7 5 8 4 2 4 8 4 5 5 8 4 5 8 8 1 3 7 4 3 5 4 2 3 2 5 8 3 2 4 2 4 5 5 6 3 2 4 7 2 0 5 8 2 2 4 8 5 0 5 8 5 0 8 8 3 0 5 3 2 1 6 4 3 4 14 USER MODE 1. In standby mode, press USER key to enter USER mode. 2. Press USER key to choose U1 U2 or U3. Press ENTER key to confirm. 3. Press UP/DOWN keys to set time value. Press ENTER key to confirm. 4. Press SPEED + / SPEED to set speed for each section. Press INCLINE + / INCLINE to set incline for each section and press enter key to confirm. 5. Press START key to exercise. SLEEP MODE If there is no operation for 10 minutes in standby mode, the console will enter Sleep Mode. And the heart rate monitor will disconnect with the console. Press any button to wake up the console, then the console will enter standby mode. SAFETY KEY FUNCTION Safety key is for emergency stop. Remove the Safety Key (No. 109) in any mode, and the treadmill will slow down rapidly until it stops. The console will display E0 in speed window. USB CHARGING FUNCTION The USB connection port of the electronic watch can charge the mobile phone through the data cable. (5V---2A) TECHNICAL DATA Connectivity: Bluetooth LE Frequency Range: 2400~2483.5Mhz Transmitting Power: 0dBm APP CONNECTION: Connect Smart Equipment to SunnyFit App: 1. Scan to download SunnyFit from the app store: 2. Ensure that the Bluetooth function is turned on from your mobile device. 3. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in. 4. Begin any workout activity that matches your smart equipment, then follow the onscreen prompts to search for and connect to your smart equipment. 5. When connected, your stats and records will be displayed at the end of your course/session, and recorded in your account profile! 15 TROUBLE SHOOTING Error code E0 E01 E02 E03 E06 E08 E11 E12 E13 E14 E15 E16 E17 E18 E19 Explanation Safety key drop off Communication fault. Overcurrent protection. Overload protection. Incline self-checking fault. Speed signal missing Low voltage protection Over voltage protection Motor protection Motor stuck protection Incline sensor fault Motor error. Motor over current protection Motor over heat Stall Trouble shooting Please check whether the safety key is well connected or not. Please check whether the signal connecting wire are in good condition or well connected. 1. Please keep the treadmill running and check whether the motor is blocking. 2. Please keep the treadmill running and check whether the load weight is too heavy, such as user's weight. 1. Please keep the treadmill running and check whether the motor is blocking. 2. Please keep the treadmill running and check whether the load weight is too heavy, such as user's weight. Please check if the Incline motor is in good condition or the wires of the motor are well connected Pls Check speed sensor connection or change speed sensor or check motor is in good condition. Please check the voltage of the socket. Please check the voltage of the socket. Please check the voltage of the socket. Please check if anything blocks the motor. Please change the incline motor. Please check whether the motor is well connected to the Controller. If it is well connected, please check if the motor is broken. Suggest to use multi-meter to measure the internal resistance of the motor. Check if anything blocks the motor. Check if anything blocks the motor. 1. Wait 3 minutes after the power is off, and then check whether the power is restored. 2. After the power off, push off the running belt with your feet to see if you want to use a lot of force, if so, please add lubricating oil to the running belt maintenance, or adjust the tightness of the running belt until you can easily push off the running belt after the power is used. 3. Contact the after-sales service to replace the controller. 4. Contact the after-sales service to replace the motor. NOTE: If you are having trouble connecting your smart equipment, visit www.sunnyfit.com/guide or scan the QR code below: If you require additional support, please contact support@sunnyfit.com. 16 EXPLODED DIAGRAM 17 No. Description 1 Incline Frame 2 Transportation Wheel 3 Screw 4 Sleeve 5 Screw 6 Nut 7 Main Frame 8 Motor Fixing Plate 9 Column Fixing Plate 10 Upper Column Fixing Pad 11 Lower Column Fixing Pad 12 Running Board Cushion Pad 13 Motor Lower Cover 14 Motor Upper Cover 15 Power Switch Box 16 Upper Foot Rail Left 17 Lower Foot Rail Left 18 Upper Foot Rail Right 19 Lower Foot Rail Right 20 Foot Pad Cover 21 Spring 22 Motor Fixing Plate 23 Motor Cushion Pad 24 Fixing Pin 25 Square Wire Buckle 26 Front Roller 27 Rear Roller 28 Running Belt 29 Running Board 30 Cylinder Cushion Pad 31 Pad For Incline Frame 32 Wire rope holder 33 Driving Belt 34 Foot Supporting Pad 35 Foot Supporting Pad Spacer 36 Foot Supporting Pad Axle 37 Metal Cable 38 Screw 39 Screw 40 Screw 41 Hexagonal Socket Head Screw 42 Hexagonal Socket Head Screw 43 Hexagonal Socket Head Screw 44 Flat Spacer 45 Nylon Nut 46 Hexagon Headed Bolt 47 Hexagon Headed Bolt 48 Hexagonal Socket Head Screw 49 Hexagon Headed Bolt 50 Umbrella Head Hexagon Socket Screw 51 Motor Controller 52 Brushless Motor 53 Incline Motor 54 Frame Communication Cable 55 Rocker Switch 56 Black Connection Cable 57 White Connection Cable 58 Power Cord 59 Side Column PARTS LIST Spec. Qty. 1 2 M8*P1.25*45L*S15 2 25*15*5.8 4 M8*P1.25*42L*S12 2 M8*P1.25*7T 6 1 31*64*4T 1 42.5*62*4T 2 Rubber 2 Rubber 2 Rubber 2 1 1 1 1 1 1 1 2 15*12*1.5*60 2 91*18*4T 1 74*18*2T 2 15.9*11.5*M6*86 2 1 60*42*17*552(592) 1 42*17*530(680) 1 2810*510*1.4T 1 584*1283*18T 1 25*M6*28 4 1 150*23*15 2 1 2 2 2 1460L, 70L 2 M4*P0.7*8L 9 ST3.9*14L 81 M4*P0.7*10L 8 M6*P1.0*10L 8 M8*P1.25*14L 4 M8*P1.25*55L*S20 2 10*20*2T 2 M10*P1.5*9T 2 M10*P1.5*45L*S15 1 M10*P1.5*60L*S15 1 M8*P1.25*55L 2 M8*P1.25*30L 1 M8*P1.25*25L*S12 4 1 1 1 Length: 1300mm 1 1 Two Ends 1 Two Ends 1 Length 2000mm 1 1 No. Description 60 Column Lower Cover 61 Column Outer Cover Left 62 Column Inner Cover Left 63 Column Inner Cover Right 64 Column Outer Cover Right 65 Handle Bar Folding Switch 66 Isolate Pad 67 Umbrella Head Cross Selftapping Screw 68 Umbrella Head Cross Screw 69 Umbrella Head Hexagon Socket Screw 70 Console Set 71 Tablet Holder 72 Cable Fixing Base 73 Console Upper Cover 74 Console Lower Cover 75 Left Handle Bar External Cover 76 Left Handle Bar Inner Cover 77 Right Handlebar Inner Cover 78 Right Handlebar External Cover 79 Console Board Frame 80 Tablet Holder Cover 81 Tablet Holder Upper Cover 82 Tablet Holder Lower Cover 83 Tablet Holder Clip 84 Bottle Holder 85 Tablet Holder Elastic Thread 86 Tablet Holder 1 87 Tablet Holder 2 88 Bottle Holder Pad 89 Heart Rate Sensor 90 Handle Bar Fixing Pin 91 Handle Bar Fixing Pin Spring 92 Circlip 93 Safety Key Fixing Base 94 Magnet For Safety Key 95 Copper Sheet 96 Cross Half Round Head Selftapping Screw 97 Umbrella Head Cross Selftapping Tail Screw 98 Umbrella Head Cross Selftapping Tail Screw 99 Umbrella Head Cross Selftapping Screw 100 Cross Recessed Countersunk Head Tapping Screws 101 Cross Recessed Countersunk Head Screw 102 Console Communication Cable 103 Safety Key Cable 104 Hear Rate Sensor Cable Left Side 105 Hear Rate Sensor Cable Right Side 106 USB Charger Cable 107 Film Of Console 108 Console Set 109 Safety Key 110 Allen Wrench 111 U-Cap 112 Filter 113 Filter Fixing Plate 114 Hexagon Nut 115 Spring Washer 116 Spring Washer 117 Flat Washer 118 Flat Washer Spec. Qty. 2 1 1 1 1 2 4 ST3.9*25L 8 M4*P0.7*12L, Umbrella Head 8 2 M8*P1.25*23L*S10 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 2.2*950L 1 299*85.6*1.5T 1 308*9*1.5T 1 80*1.5T 2 85.5*8.3*0.3T 4 8*10*5*27.5 2 7.5*5.9*0.8*18 2 4.7*0.6T 2 1 10*7 1 33*7*0.3T 2 ST2*5L 2 ST3.9*8L 13 ST2.9*8L 16 ST2.5*8L 2 ST2.0*6L 30 M4*P0.7*10L 2 Length 350mm 1 Length: 300mm 1 Length: 600mm 1 Length 900mm 1 Length 300mm 1 579*62 1 1 1 6mm*80mml*130mml 1 4 1 1 2 8 4 4 4 Version 1.1 18 19