Xiaomi Instant Photo Printer 1S Set

Product Overview

This manual provides instructions for the Xiaomi Instant Photo Printer 1S Set. Please read it carefully before use and retain it for future reference.

Key Components:

• Heat Dissipation Vent
• Rear Paper Output Slot
• Direct Connection Button
• Power Button / Indicator
• Indicators (Wi-Fi, Error, Direct Connection)
• Paper Tray Opening
• Power Port
• Product Label
• Ribbon Compartment

Accessory List

The package includes:

• Photo Album (50 pages)
• Paper Tray Holder
• Paper Tray Cover
• Paper Tray
• 10 x 6" Photo Paper
• 10 x 3" Sticky-backed Photo Paper
• 3" Paper Holder (in the paper tray)
• Ribbon (up to 20 prints)
• Power Adapter

How to Install

Installing the Ribbon

1. Open the ribbon compartment.
2. Insert a new ribbon and ensure it is secured.
3. Close the ribbon compartment. (Note: Lift the red lever above the ribbon to remove it.)

Loading 3" Sticky-backed Photo Paper

1. Pull the paper tray holder open.
2. Rotate the holder vertically until it snaps into the paper tray bottom.
3. Open the paper tray cover. (Ensure the 3" paper holder is in the paper tray.)
4. Load the 3" sticky-backed photo paper into the slot of the 3" paper holder with the glossy side facing up. (Note: The printer may not feed paper if more than 10 sheets are loaded.)
5. Close the paper tray cover.

Loading 6" Photo Paper

1. Pull the paper tray holder open.
2. Rotate the holder vertically until it snaps to the paper tray bottom.
3. Open the paper tray cover.
4. Remove the 3" sticky-backed photo paper and the 3" paper holder.
5. Load photo paper into the paper tray with the glossy side facing up. (Note: The printer may not feed paper if more than 20 sheets are loaded. Do not touch the area within the cutting lines of the photo paper.)
6. Close the paper tray cover.

Installing the Paper Tray

1. Pull the paper tray holder open.
2. Rotate the holder vertically until it snaps to the paper tray bottom.
3. Open the paper tray opening and insert the paper tray into the printer. (Caution: The rollers of the paper feed port are moving parts. Keep body parts away from moving parts.)

How to Use

Placing the Printer

Ensure there is more than 10 cm of space behind the printer, as the paper moves back and forth during printing. The paper will move back and forth several times.

Storing the Printer

It is recommended to store the paper tray on top of the printer to save space when it is not in use.

Turning On and Connecting

1. Turning On

Plug the power cord into the power port and press the power button. The printer is on when the power indicator is lit and the Wi-Fi indicator blinks orange, indicating it is waiting for a connection.

2. Connecting with Mi Home/Xiaomi Home App

This product works with the Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. If the app is already installed, you will be directed to the connection setup page. Alternatively, search for "Mi Home/Xiaomi Home" in your app store to download and install it. Open the app, tap "+" in the upper right corner, and follow the prompts to add your device.

Attention: The Mi Home/Xiaomi Home app is the only way to configure the printer's network settings. Ensure the network connection is configured before using a PC for wireless printing. The latest app version is recommended for a smooth connection. Dual-band steering on your router should be disabled. If the printer is not connected to the network or the connection is lost, it will automatically turn off after ten minutes. Restart it and perform the necessary operations.

Notes:

• If you cannot scan the printer's QR code, search for its name to add it.
• App versions may be updated; follow the instructions based on the current app version.
• The app is referred to as Xiaomi Home app in Europe (except Russia). Use the app name displayed on your device as the default.

Button Instructions

Power Button Instructions

• Press: Turn on/off.
• Press and hold for 6 seconds: Reset the network.
• Continuously press 6 times: Restore factory settings.

Notes:

• Once the network is reset, all indicators remain on for 1 second.
• Printing or firmware updates are not interrupted by pressing or holding the power button.
• It is recommended to turn off and restart the printer when an error occurs to allow it to fix the error automatically upon restart.

Direct Connection Button Instructions

• Press and hold for 3 seconds: Enable/Disable the direct connection function. (Note: This function cannot be enabled during power off or firmware updates.)

Indicator Descriptions

Power Indicator Descriptions

• Off: Turned off.
• On: Turned on / Standby.
• Blinking rapidly: Printing.
• Blinking slowly: Updating the firmware / In sleep mode.

Wi-Fi Indicator Descriptions

• Blinking orange: Awaiting connection.
• Blinking blue: Connecting.
• Blue: Connected successfully.
• Orange: Couldn't connect. (Note: If the Wi-Fi indicator remains orange, check if Wi-Fi can access the Internet normally.)

Direct Connection Indicator Descriptions

• Off: Direct connection function disabled.
• Blinking orange: Awaiting connection.
• Blue: Successfully connected to the printer.
• Blinking blue: The device is awaiting direct connection when another device is already connected.

Error Indicator Descriptions

• Off: The printer is working normally.
• Blinking orange: Printer error. Follow the instructions in the app to solve the error.

Wireless Printing

Connect to the app first, then select one of the following printing methods. Only 2.4 GHz Wi-Fi networks are supported.

Printing via Mi Home/Xiaomi Home App

Ensure both the device and printer are connected to the network and within Wi-Fi coverage. Follow the app instructions to print.

Printing via AirPrint for Apple devices

Ensure your Apple device and the printer are connected to the same Wi-Fi network and within Wi-Fi coverage, or direct connection is enabled. Open the file, find the print option in the share menu (or download the file to your device's album if not found), select "Xiaomi Instant Photo Printer 1S [XXXX]", set print parameters, and print.

Printing via Android Devices

Ensure your Android device and the printer are connected to the same Wi-Fi network and within Wi-Fi coverage, or direct connection is enabled. Go to your album, select the photo, and print. If the photo print function is not available, visit https://mopria.org/print-from-android to download the app and learn how to print. (Note: Android system does not support 3" photo printing.)

Wireless Printing via PC

Ensure your PC and printer are connected to the same Wi-Fi network and within Wi-Fi coverage, or direct connection is enabled. Follow the steps below to configure the printer's connection:

• Windows 7: Control Panel > Hardware and Sound > Devices and Printers > Add a printer > Add a network, wireless or Bluetooth printer, then select "Xiaomi Instant Photo Printer 1S [XXXX] - Wi-Fi".
• Windows 8/8.1: Control Panel > Hardware and Sound > Devices and Printers > Add a printer, then select "Xiaomi Instant Photo Printer 1S [XXXX] - Wi-Fi".
• Windows 10: Settings > Devices > Printers & scanners > Add a printer or scanner, then select "Xiaomi Instant Photo Printer 1S [XXXX] - Wi-Fi".

Notes:

• Before installing the driver, ensure Windows is allowed to update and is updated to the latest version.
• If automatic installation fails, download the driver from http://i01.appmifile.com/webfile/globalweb/drivers/Xiaomi_Photo_Printer_1S.zip.

Direct Connection Settings and Printing

You can connect your device to the printer via this function without a router.

Direct Connection for Apple and Android Devices

1. Enable direct connection: Press and hold the direct connection button for 3 seconds. The printer awaits connection when the indicator blinks orange.
2. Connect to Wi-Fi: Enable your device's wireless network and select "Xiaomi Photo Printer 1S [XXXX]". Check the printer's hotspot password on the barcode label at the bottom of the printer and enter it to connect. The direct connection indicator will remain blue upon successful connection.
3. Printing: Open the album, select photos, tap Print, and select "Xiaomi Instant Photo Printer 1S [XXXX]" to print.

Notes:

• "XXXX" in the network and printer name refers to the last four digits of the serial number found on the barcode label.
• The printer's hotspot is for printing only and does not support internet access.
• After connecting an Android device to the printer's hotspot, its mobile network will not work.
• If the photo print function is not accessible on your Android phone's album, visit https://mopria.org/print-from-android to download the app and learn how to print.

Direct Connection for Windows Devices

1. Download & install driver: Go to http://i01.appmifile.com/webfile/globalweb/drivers/Xiaomi_Photo_Printer_1S.zip to download the driver.
2. Enable direct connection: Press and hold the direct connection button for 3 seconds. The printer awaits connection when the indicator blinks orange.
3. Connect to Wi-Fi: Enable your device's wireless network and select "Xiaomi Photo Printer 1S [XXXX]". Check the printer's hotspot password on the barcode label at the bottom of the printer and enter it to connect. The direct connection indicator will remain blue upon successful connection.
4. Add a printer: Follow the same steps as for Wireless Printing via PC.
5. Printing: Open the photo file with image editing software, click Print, and select "Xiaomi Instant Photo Printer 1S [XXXX]" to print.

Cautions

• Recommended operating temperature: 10°C to 35°C. Printing quality may be affected if the ambient temperature is too high.
• Use only genuine ribbon and photo paper for best printing quality.
• During printing, ensure photo paper is placed flat with the glossy side facing up in the paper tray.
• The print head heats up during dye-sublimation printing and may remain hot afterward. Do not touch the print head to avoid burns.
• The photo paper moves back and forth during printing and is ejected automatically upon completion. Be patient and do not pull the paper forcefully to avoid damaging the printer.
• If not using the printer for a long time, remove the paper tray, close openings, and cover to prevent dust. Otherwise, future print quality may be negatively affected.
• Do not touch the glossy side of the photo paper or the ribbon's plastic film to avoid fingerprints affecting print quality.

Regulatory Compliance Information

The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Xiaomi Inc. uses these marks under license. Other trademarks and trade names belong to their respective owners.

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To satisfy FCC / IC RF exposure requirements, maintain a separation distance of at least 20 cm between the antenna of this device and persons during operation. Operations at closer distances are not recommended.

Warranty Notice

As a Xiaomi consumer, you benefit from additional warranties under certain conditions. These benefits are in addition to, and do not replace, any legal warranties provided by your national consumer law. Duration and conditions for legal warranties are governed by local laws. For more information on consumer warranty benefits, refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/. Unless prohibited by law or otherwise promised by Xiaomi, after-sales services are limited to the country or region of original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace, or refund your product. Normal wear and tear, force majeure, abuse, or damage caused by user negligence or fault are not covered. The contact person for after-sales service can be any person within Xiaomi's authorized service network, authorized distributors, or the final vendor. If in doubt, contact the person identified by Xiaomi.

These warranties do not apply in Hong Kong and Taiwan. Products not duly imported, manufactured by Xiaomi, or acquired from Xiaomi or an official Xiaomi seller are not covered. You may benefit from warranties from non-official retailers who sold the product, as per applicable law. Contact the retailer from whom you purchased the product.

Federal Communications Commission Supplier's Declaration of Conformity

Product: Xiaomi Instant Photo Printer 1S

Model Number(s): ZPDYJ03HT

Brand/Trade: Xiaomi

This device has been tested and found to be in compliance with CFR 47 Part 15 Regulation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Product Specifications

Name: Xiaomi Instant Photo Printer 1S

Model: ZPDYJ03HT

Item Dimensions: 194 × 124.6 × 83.6 mm

Net Weight: Approx. 1.2 kg (including photo printer, 3" paper holder, power adapter, paper tray, ribbon, 10 x 3" sticky-backed photo paper, 10 x 6" photo paper, photo album)

Input: 24 V === 1.6 A

Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz

Operating Temperature: 10°C to 35°C

Operation Frequency: 2400-2483.5 MHz

Maximum Output Power: 18 dBm

FCC ID: 2AZHDZPDYJ03HT

IC: 28632-ZPDYJ03HT

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Hannto Technology Co., Ltd. (a Mi Ecosystem company)

Address: Room 704, Building 1, Lane 88 Shengrong Rd., Pudong, Shanghai, China

For more information, visit www.mi.com.