ABBLE
User Manual for Maypex models including: 300369-BLK-V1 Manufactured Wood Console Table, 300369-BLK-V1, Manufactured Wood Console Table, Wood Console Table, Console Table, Table
Maypex 300369-BLK-V1 603765411540 0603765411540 1006442782
File Info : application/pdf, 8 Pages, 806.28KB
DocumentDocumentSKU#300369 ABBLE® Console Table Thank you for purchasing ABBLE® product. You are welcomed to visit www.abblestore.com for more ABBLE® products. We are commied to providing customers with quality products and a good purchasing experience. Need any help regarding purchase or customer service, please email us by cs@abbleinc.com (will be responded within 24 working hours) www.abblestore.com Aenon for assembly 1. Read the instrucon carefully and completely before assembling the product. 2. Follow the instrucons step by step. Any wrong operaon might damage the product, which will not be considered as quality defect of product itself. Any return caused by this reason will not be accepted. 3. Place product on so floor (carpet, cardboard, wood) for assembly to prevent scratching or damage, never on concrete, sand or slate floor. 4. Verify all components and hardware are included according to the part list before start assembling. In case of missing of any part, stop assembling and contact us right away. 5. Electrical tools (not included) help assembly yet do not over drive the screws, bolts, nuts, etc. 6. Follow the manpower request for assembly. Shortage of manpower might cause unsuccessful assembly or personal injury. 7. Do not use the product unl all the components, screws, bolts, nuts are fastened ghtly. 8. Contact us when you have any problem regarding assembly or any product issues, we will response as soon as possible to help you out of problem. Don't return the goods on your purchase plaorm right away. Maintenance 1. Clean the product with a damp cloth. 2. Indoor use only. Limited Warranty: 1 year (12 months) People Required: 2 Tools Required: Phillips Screwdriver (Not Included) Assembly Time: 60 minutes Part List Part No QTY 1 ×1 Top Panel 2 ×1 Le Side Panel 3 ×1 Right Side Panel 4 ×1 Drawer Boom Panel 5 ×1 Support Bar 6 ×1 Back Support Bar 7 ×1 Middle Shelf 8 ×1 Boom Shelf Part No QTY 9 ×2 Boom Shelf Support Bar 10 ×1 Drawer Front Panel 11 ×1 Right Drawer Side Panel 12 ×1 Le Drawer Side Panel 13 ×1 Drawer Back Panel 14 ×2 Drawer Rail Support Bar 1 Hardware List Hardware No QTY A ×29 Hardware No QTY H ×1 Cam Bolt B ×29 Screw I ×2 Cam Lock C ×18 Drawer Handle J ×1 Wooden Dowel D ×8 Glider K ×1 Screw E ×2 Glider L ×1 Screw F ×10 Le Drawer Rail M ×1 Screw G ×2 Right Drawer Rail N ×1 Handle Bolt Anchor Hardware No QTY O ×2 Washer P ×1 An-p Rope Q ×1 Long Screw 2 Step 1 Part No. & QTY × 1 × 1 Hardware No. & QTY D × 4 L × 1 M × 1 1. Attach Left Drawer Rail (L) on Left Drawer Side Panel by Screws (D). 2. Attach Right Drawer Rail (M) on Right Drawer Side Panel by Srews (D). 3. Attention: Make sure srews (D) are fastened through the right holes as indicated. Step 2 Part No. & QTY × 1 Hardware No. & QTY A × 6 Screw 6pcs of Cam Bolts (A) into Drawer Front Panel . Step 3 Part No. & QTY × 1 × 1 × 1 × 2 Hardware No. & QTY E × 2 F × 4 1. Attach Drawer Side Panel + to Drawer Back Panel by using Screws (F). 2. Attach Drawer Rail Support Bar to Drawer Back Panel by using Screws (E). 3 Step 4 Part No. & QTY × 1 × 1 Hardware No. & QTY B × 6 1. Insert Drawer Bottom Panel into grooves of drawer. 2. Asssemble Drawer Front Panel as the arrow indicates by using Cam Locks (B). Step 5 Part No. & QTY × 1 Hardware No. & QTY G × 2 I × 2 Attach 2pcs of Drawer Handles (I) on Drawer Front Panel by using Handle Bolts (G). Step 6 Part No. & QTY × 1 × 1 Hardware No. & QTY A × 18 D × 4 J × 1 K × 1 1.Screw Cam Bolts (A) into Left Side Panel and Right Side Panel , make sure the screws go through the correct holes. 2.Attach Glider (J) to Left Side Panel by using 2pcs of Screws (D). 3.Attach Glider (K) to Right Side Panel by using 2pcs of Screws (D). 4 Step 7 Part No. & QTY × 1 × 1 × 1 Hardware No. & QTY B × 3 C × 1 1. Insert 1pc of Wooden Dowel (C) into Support Bar as indicated. 2. Connect Right Side Panel to Support Bar and Back Support Bar by using Cam Locks (B). Step 8 Part No. & QTY × 1 × 1 Hardware No. & QTY B × 2 C × 2 1. Insert 2pcs of Wooden Dowels (C) into Right Side Panel as indicated. 2. Connect Middle Shelf to Right Side Panel by using 2pcs of Cam Locks (B). Step 9 Part No. & QTY × 1 × 2 Hardware No. & QTY F × 4 Attach Bottom Shelf to Bottom Support Bars by using 4pcs of Screws (F). 5 Step 10 Part No. & QTY × 1 × 1 Hardware No. & QTY B × 4 C × 4 1. Insert 4pcs of Wooden Dowels (C) into Right Side Panel as shown. Make sure the right holes to be inserted. 2. Connect Bottom Shelf to the Right Side Panel by using 4pcs of Cam Locks (B). Step 11 Part No. & QTY × 1 Hardware No. & QTY B × 9 C × 7 1. Insert 7pcs of Wooden Dowels (C) into Left Side Panel . 2. Assemble Left Side Panel by using 9pcs of Cam Locks (B) as indicated. Step 12 Part No. & QTY × 1 Hardware No. & QTY A × 5 B × 5 C × 4 F × 2 1. Screw 5pcs of Cam Bolts (A) into Top Panel . 2. Insert 4pcs of Wooden Dowels (C) into the holes of side panels +as indicated. 3. Assemble Top Panel by using 5pcs of Cam Locks (B) and 2pcs of Screw (F). 6 Step 13 Carefully insert drawer into unit. Step 14 Hardware No. & QTY H × 1 O × 1 P × 1 Attach anti-tip rope on the Back Support Bar by using screw (H) and Washer (O) as indicated. Step 15 Hardware No. & QTY N × 1 O × 1 Q × 1 1. Place unit against wall and mark hole for anti-tip rope. 2. Drill a hole in wall make sure the hole is slightly smaller than Anchor (N) then gently tap Anchor (N) into hole. 3. Attach the anti-tip rope on wall by using Washer (O) and Long Screw (Q). Wall Wall 7