Declaration of Conformity

Authorized Representative

fischer international s.r.o.

Průmyslová 1833, Postal Code 250 01 Brandýs nad Labem

Company ID (IČO): 25 14 03 88

Manufacturer

Fischerwerke GmbH & CO.KG

D-0172176 Waldachtal, Weinhalde 14-18, Germany (SRN)

Product

Frame Anchors

Unique Product Identification: F-S, S-H-R, GS, S 14 ROE, N, NU, SELBO, UN

Product Description and Use

F-S: For through-fixing of window frames to constructions made of concrete, solid fired bricks, perforated or lime-sand bricks, and hollow-core lightweight concrete blocks. The anchor must be used only according to the manufacturer's mounting instructions and for constructions for which it is intended and guaranteed by the manufacturer. The anchor is made of polyamide with a diameter of 8.10mm.

S-H-R, GS: For through-fixing of frames, gates, door frames, and cabinets to constructions made of perforated fired bricks, lime-sand bricks, or aerated concrete. The anchor must be used only according to the manufacturer's mounting instructions and for constructions for which it is intended and guaranteed by the manufacturer. The anchor is made of polyamide. S-H-R can be used with the GS ring for fixing light interior furnishings.

S 14 ROE: For through-fixing and front-fixing to solid building materials such as concrete, solid lime-sand brick, natural stone with dense structure, and solid fired brick. The anchor must be used only according to the manufacturer's mounting instructions and for constructions for which it is intended and guaranteed by the manufacturer. The anchor is made of polyamide. In combination with the GS 12 scaffolding eyelet, it is intended for scaffolding fixing.

N, NU, SELBO, UN: For through-fixing. Intended use for fixing wooden beams and battens, insulation material, sheet metal, steel profiles to constructions made of concrete, solid fired bricks, or lime-sand bricks and blocks, and natural stone. The anchor must be used only according to the manufacturer's mounting instructions and for constructions for which it is intended and guaranteed by the manufacturer. The anchor is made of polyamide.

Conformity Assessment Procedure

According to § 12 para. 3 letter d) of Act No. 22/1997 Coll., in its current wording, and § 6 of Government Regulation No. 163/2002 Coll., as amended by Government Regulation No. 312/2005 Coll., and Government Regulation No. 215/2016 Coll.

The product meets the basic requirements stipulated by Government Regulation No. 163/2002 Coll., as amended, and is safe under conditions of normal and, if applicable, manufacturer-intended use. The authorized representative ensures the conformity of all products placed on the market with the technical documentation and basic requirements.

Technical Regulations and Standards

• ETG 020: Guiding document for issuing European Technical Approvals – Plastic anchors for general use in concrete and masonry in non-load-bearing structures.
• TN 09.03.01: Plastic anchors for concrete and masonry for use in systems such as facade systems, for fixing or supporting elements that contribute to system stability.

Test Reports

Decision on extension of validity of STO No. 090-040863 dated 31.3.2023, issued by the Building Research Institute, s.p. Prague, branch 0900 TIS, Prosecká 76a, 190 00 Prague 9, AO No. 204, Company ID: 00015679, extending the validity of the Building Technical Certificate No. 090-040863 until 31.3.2028.

Building Technical Certificate No. 090-040863 dated 16.3.2018, issued by the Building Research Institute, s.p. Prague, branch 0900 TIS, Prosecká 76a, 190 00 Prague 9, AO No. 204, Company ID: 00015679, valid until 31.03.2023.

Protocol on the result of the assessment of the production control system No. 090-040889, issued by the Building Research Institute, s.p. Prague, branch 0900 TIS, Prosecká 76a, 190 00 Prague 9, AO No. 204, Company ID: 00015679 dated 23.03.2018.

Certificate of the production control system No. 204/C6/2018/090-040895, issued by the Building Research Institute, s.p. Prague, branch 0900 TIS, Prosecká 76a, 190 00 Prague 9, AO No. 204, Company ID: 00015679 dated 31.03.2023.