Hunter Caribbean Breeze Ceiling Fan Installation Manual

Congratulations on your purchase of your new Hunter® Ceiling Fan!

The ceiling fan you purchased will provide comfort and performance in your home or office for years to come. This manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to provide you with the best ceiling fan available anywhere in the world.

We're here to help!

This Instruction Manual is designed to make installation as easy as possible. As you work through this Instruction Manual, keep your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are not familiar or comfortable with wiring, please contact a qualified electrician. We also provide a support phone number at 1.888.830.1326 or visit us at Hunterfan.com.

⚠️ Read and save these instructions

Warnings

• w.1 - To reduce the risk of fire, electric shock, or personal injury, mount the fan directly to the building structure and/or an outlet box marked acceptable for fan support of 70 lb (31.8 kg) and use the mounting screws provided with the outlet box.
• w.2 - To avoid possible electric shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers that supply power to the outlet box and the associated wall switch. If you cannot lock the circuit breakers in the off position, securely attach a prominent warning device, such as a safety tag, to the service panel.
• w.3 - To reduce the risk of electric shock, this fan must be installed with an isolating wall switch/control.
• w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing them, when balancing the blades, or when cleaning the fan. Do not insert foreign objects between the moving fan blades.

Precautions

• c.1 - All wiring must be done in accordance with local and national electrical codes with ANSI/NFPA 70. If you are not familiar with wiring, employ a qualified electrician.
• c.2 - ONLY use Hunter replacement parts.

This product conforms to UL Standard 507.

✔️ Intertek ETL US

Tools you will need to complete your installation:

• Ladder
• Screwdriver
• Pliers
• Wire Strippers

OPTIONAL

If mounting to a support structure, you will also need these tools:

• Power Drill
• 9/64" Drill Bit

What's in your box:

We recommend you unpack everything and lay it out in front of you. We have grouped the components drawn below along with the hardware you will need for those parts. The screws below are drawn to scale to make it easier to identify which hardware piece is needed to install each component.

Hunter Pro Tip: Do not discard hardware bags or mix parts from different bags. Note the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.

• For installing the hook bracket and fan wiring:
• Flat Washer x2
• Wood Screw x2
• Wire Connector x4
• For installing the blades:
• Blade Bracket x5
• Blade Screw x15
• Washer x15
• For installing the canopy:
• Canopy x1
• Canopy Screw x2
• For installing the light kit:
• Switch Housing x1
• Light Kit Screw x3
• Light Bulb x2
• Other parts:
• Downrod
• Hanging Ball
• Canopy Cover
• Pull Chains

⚠️IMPORTANT! Remove the shipping blocks from the motor. Save the screws. They will be needed for installing the blade bracket. Note: Some fans come with a shipping ring instead of shipping blocks. Please remove the ring and save the screws.

Note: Fan type may vary.

Found a missing or damaged part? Do not return to store. Let us make it right. Visit HunterFan.com or call us at 1.888.830.1326

Choosing the right installation location.

You probably bought this fan with a location in mind. Let's look below to make sure it's a good fit.

Check room dimensions:

• 30 inches from the tip of the blade to the nearest wall or obstruction.
• 7 feet from the bottom edge of the blade to the floor.

Check the outlet box:

It must be capable of securely supporting the fan to the building structure or an outlet box approved for fans.

Checking the ceiling slope:

• Standard Mounting
• Sloped Ceiling Mounting

If you have a flat ceiling

Use standard mounting or low-profile mounting to hang the fan from a flat ceiling.

If your ceiling is sloped:

1. You will need a longer downrod (sold separately).
2. If the slope of your ceiling is greater than 34°, you will also need an Angle Mount Kit (sold separately).

A little more information on Sloped Ceiling Mounting:

For optimal performance and appearance, you should use a longer, hollow downrod with your Hunter ceiling fan when installing on high or sloped ceilings. If your ceiling has a slope greater than 34°, you will also need an Angle Mount Kit. Longer downrods and Angle Mount Kits are sold separately at HunterFan.com.

Hunter Pro Tip: Determining if you need an Angle Mount Kit: Fold on the dotted line. Place the edge against the wall. Slide it up to the ceiling. If the guide touches the wall but not the ceiling, you need an Angle Mount Kit.

Installing the Ceiling Mount.

You have two installation options. Choose the one that best suits your location. Remove any existing bracket before installation. Use only the ceiling bracket provided by Hunter that is inside the fan box.

⏏️ Turn off the power

Option 1: Machine Screw

Use machine screw (provided with the outlet box) to secure to the existing ceiling outlet box. Make sure it is securely installed and acceptable for fan support of 31.8 kg (70 lb) or less.

Angle Mount Tip

For sloped ceilings, point the opening toward the peak.

Option 2: Wood Screw

Use 3" wood screw (included) to secure to the support structure with the approved electrical outlet box. Drill 9/64" pilot holes in the support structure to help secure the ceiling bracket with the hardware from the bag.

Hunter Pro Tip: Machine screws are the ones that come with your outlet box.

• Wood Screw x2
• Flat Washer x2

Installing the Downrod.

Follow along if you are using the downrod that came pre-assembled in your box. Need to install a longer or shorter downrod? Refer to the guide at the end of this manual.

Hunter Pro Tip: The ground wire attached to the downrod is approximately 8 inches long.

STEP 1

Remove the pre-installed set screw to allow the downrod to be inserted.

STEP 2

Tighten the downrod set screw with pliers. DO NOT TIGHTEN BY HAND.

STEP 3

Tighten the downrod by rotating it (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8" extending from the top of the downrod.

⚠️FAN FALL HAZARD

To prevent SERIOUS INJURY OR DEATH:

• ALWAYS tighten set screws with pliers.
• DO NOT tighten set screws by hand.
• VERIFY set screws are tightened with pliers each time you change the fan direction.

Hanging the fan.

Slide the canopy over the downrod and wires.

Progress Check: Your fan should look like this.

NOTICE

To prevent fan damage, ALWAYS lift by holding either the fan housing or the support tube. Place the downrod ball into the ceiling mount slot.

Wiring the fan.

We know wiring can be tricky. Let's make it easier. Follow these steps to wire your fan quickly and safely. Follow the path that most closely matches your wall switch installation. If you are not familiar with wiring or uncomfortable doing it yourself, please contact a qualified electrician.

You will need the following:

• 4 wire connectors (these are found in the bag).

Do you have a single switch?

Follow these steps:

• Connect the ceiling ground wire (from the ceiling) to the fan white wire (neutral).
• Connect the ceiling black wire (hot) to the fan blue wire (for fan motor) and black wire (for fan light).
• Connect the three ground wires (green, green with yellow stripe, or bare copper) from the ceiling, downrod, and mounting bracket.

⚠️WARNING

All wiring must be done in accordance with local and national electrical codes ANSI/NFPA 70. If you are not familiar with wiring, or if you have doubts, consult a qualified electrician.

Hunter Pro Tip: Additional wiring? Tuck the splices upward and carefully push them back through the hanging bracket into the outlet box. Separate the wires, with the ground wires to one side of the outlet box and the non-ground wires to the other side of the outlet box.

Do you have dual switches?

Follow these steps:

• Connect the ceiling ground wire (from the ceiling) to the fan white wire (neutral).
• Connect the ceiling black wire (hot) to the fan black wire (for fan motor).
• Connect the second ceiling wire (light) to the fan blue wire (for fan light).
• Connect the three ground wires (green, green with yellow stripe, or bare copper) from the ceiling, downrod, and mounting bracket.

Hunter Pro Tip: Connecting wires? Hold the bare ends of the wires together and place a connector over them; then twist in a clockwise direction until they are tight. Give a gentle tug to make sure none of the wires are loose.

Installing the Canopy.

Adjust the canopy into place as shown. Lift the canopy to position it so the screw holes for the screws are aligned. Insert the two canopy screws that are in the hardware bag.

Installing the Blades.

Insert the washers from the hardware bag into the blade bracket holes, then secure each blade to a blade bracket with the blade bracket screws from the hardware bag.

Repeat x5

Attach the blade brackets to the motor using the motor screws and then firmly tighten once both screws are seated.

Remember the screws you saved after removing the shipping blocks? You need them for this step.

• Blade Screw x15
• Washer x15
• Blade Bracket Mounting Screw x10

Assembling the Light.

STEP 1 Partially screw in two of the light kit screws that are in the hardware bag into the motor housing. It doesn't matter which holes you choose.

STEP 2 Pass the wire plug through the center hole of the upper switch housing, then wrap the keyhole slot around the screws and turn clockwise.

STEP 3 Insert a third screw, found in the hardware bag, into place and tighten all three screws.

⚠️FAN FALL HAZARD Ensure all three screws are tightened to secure the upper switch housing to the mounting plate.

STEP 4 Connect the fan and light fixture plugs. Make sure to align the color-coded marks on the connectors.

STEP 5 Lift the lower switch housing until the screw holes align with the screw holes in the upper switch housing.

STEP 6 Install the three switch housing screws included in the hardware bag.

⚠️FAN FALL HAZARD Ensure all three screws are tightened to secure the lower switch housing to the upper switch housing.

Installing the Bulbs and Glass Shades.

Hunter Pro Tip: Install one bulb in each socket. When necessary, replace bulbs with the same type and wattage.

Repeat x2

Want to install your fan without a light kit? Visit www.HunterFan.com/FAQs and click on "How do I install my fan without the light kit?"

Note: Fan type may vary.

Press the glass shade and globe fitter flush against the metal plate. Pass the light chain through the hole in the center of the decorative canopy cover and pass the fan chain through the hole in the side of the cover. Finally, pass the light chain only through the hole in the decorative cover and screw the decorative cover onto the threaded rod.

⚠️GLASS FALL HAZARD To prevent SERIOUS INJURY or DEATH, ensure the glass is properly secured.

Connect the power.

Installing the Pull Chains.

Pass the pull chains from the fan switch and light switch down through the holes in the upper switch housing. Connect the pull chain fobs to the pull chains for the light and fan.

Repeat x2

The fan pull chain controls the speed: from high speed to off.

The light pull chain controls the light accessory: on and off.

Changing the direction of airflow.

Ceiling fans operate in two directions: down (counter-clockwise) and up (clockwise). To change the direction of airflow, turn off the fan and let it stop completely. Slide the fan's reverse switch to the opposite position. Turn the fan back on.

• In cold weather, use upward airflow.
• In warm weather, use downward airflow.

Troubleshooting.

The fan does not operate

• Make sure the switch is on.
• Pull the chain to ensure it is on.
• Firmly push the fan's reverse switch to the left or right to ensure it is engaged.
• Check the circuit breaker to ensure power is on.
• Make sure the blades spin freely.
• Turn off the power at the circuit breaker, then lower the canopy and check all connections according to the wiring diagram.
• Check the connections in the switch box.

Excessive Wobble

• Tighten all blade and blade bracket screws until snug.
• Turn off power, support the fan very carefully, and check that the hanging ball is properly seated.
• Use the provided balancing kit and instructions to balance the fan.

Noisy Operation

• Tighten all blade and blade bracket screws until snug.
• Check if any blade is cracked. If so, replace all blades.

Hunter Pro Tip: To clean the fan, use a soft brush or lint-free cloth to avoid scratches. Cleaning products can damage finishes.

Limited Lifetime Warranty

Hunter Fan Company warrants the following limited lifetime warranty to the original purchaser of this Hunter brand ceiling fan: This document can be found online at www.HunterFan.com. Thank you for choosing Hunter!

How can I obtain warranty-covered service?

Proof of purchase is required when requesting warranty-covered service. The original purchaser must present a sales receipt or other document that establishes proof of purchase. Hunter, at its option, may accept a gift receipt. To obtain service, contact Hunter Fan Company via the internet or by phone.

www.HunterFan.com/Support/Contact-Us/

1-888-830-1326

Please do not ship your fan or any of its parts to Hunter. Delivery will be refused.

What does this warranty cover?

Motor - Limited Lifetime Warranty

If any part of your Hunter ceiling fan fails during the time you own the fan, due to a defect in material or workmanship, as determined by Hunter in its sole discretion, we will provide you with a replacement fan free of charge.* The foregoing limited warranty applies only to the motor and does not apply to electronic controls such as remote transmitters and receivers, or capacitors used in conjunction with the motor. Such electronic controls are covered by the one-year limited warranty stated below.

Other - One-Year Limited Warranty

Unless otherwise stated elsewhere in this warranty, if any part of your Hunter ceiling fan fails at any time during the first year from the date of purchase, due to a defect in material or workmanship, as determined by Hunter in its sole discretion, Hunter will provide you with a replacement part free of charge.*

Light Kits - Warranty may vary

Light kits are covered by the one-year limited warranty. However, you may qualify for additional warranty coverage if your fan includes any of the following:

• LED Light Kit - Three-Year Limited Warranty

If your LED light kit module (not including glass components) or if the LED light fails at any time during the three years following the date of purchase, due to a defect in material or workmanship, as determined by Hunter in its sole discretion, Hunter will provide you with a replacement part free of charge.*

* If we are unable to provide an identical replacement product or part for your fan, we will provide a comparable or superior replacement product or part, at Hunter's discretion.

What does this warranty NOT cover?

Labor is excluded. This warranty does not cover any cost or fees associated with labor (including electrician fees) required to install, remove, or replace a fan or any part thereof.

No warranty applies to lights/bulbs (except as specified); remote control batteries; fans purchased or installed outside the United States; fans owned by anyone other than the original purchaser; fans for which proof of purchase has not been presented; fans purchased from an unauthorized dealer; normal wear and tear; minor cosmetic imperfections; remanufactured fans; and any fans that have been damaged due to any of the following: improper installation, misuse, abuse, lack of care, failure to follow Hunter's instructions, accidental damage caused by the owner or related persons, modifications to the fan, maintenance or repairs performed inadequately or incorrectly, incorrect voltage supply or power surges, use of inappropriate parts or accessories, failure to maintain the fan, or acts of God (e.g., flood).

THE ORIGINAL PURCHASER'S SOLE AND EXCLUSIVE REMEDIES FOR ANY AND ALL CLAIMS WITH RESPECT TO THIS PRODUCT MUST BE THOSE SET FORTH HEREIN. HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING FROM BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT IS LIMITED TO THE DURATION OF THE APPLICABLE LIMITED WARRANTIES SET FORTH HEREIN. Some states do not permit limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

How does state law affect warranty coverage?

This warranty gives you two specific legal rights. You may also have other rights that vary from state to state.

Downrod

If you need a downrod of a different length, follow these steps:

Steps 1 to 5 to remove the standard downrod tube.

Steps 6 to 10 to reassemble with a new tube.

⚠️FAN FALL HAZARD

To prevent SERIOUS INJURY OR DEATH:

• ALWAYS tighten set screws with pliers.
• DO NOT tighten set screws by hand.
• VERIFY set screws are tightened with pliers each time you change the fan direction.