Kinan | High-quality KVM Switch, KVM Console, KVM over IP
User Manual for Kinan models including: KFH162S-TX, KFH162S-RX, KFH162S-TX HDMI FHD Digital KVM Extender over Fiber Cat5, KFH162S-TX, HDMI FHD Digital KVM Extender over Fiber Cat5, FHD Digital KVM Extender over Fiber Cat5, KVM Extender over Fiber Cat5, Extender over Fiber Cat5, over Fiber Cat5, Fiber Cat5, Cat5
HDMI FHD Digital KVM Extender over Fiber/Cat5 - Kinan | Professional & High-quality KVM Switch, KVM Console, KVM over IP
HDMI FHD Digital KVM Extender over Fiber/Cat5 (KFH162S) User Manual www.kinankvm.com @All right reserved Shenzhen Kinan Technology Co., Ltd.
31 lug 2024 — User Notification. All information, documentation, and specifications contained in this manual are subject to change without prior notice.7 pagine
File Info : application/pdf, 7 Pages, 1.96MB
DocumentDocumentHDMI FHD Digital KVM Extender over Fiber/Cat5 (KFH162S) User Manual www.kinankvm.com @All right reserved Shenzhen Kinan Technology Co., Ltd. Date: 2024/02 Version: V2.0 KFH162S User Manual User Notification All information, documentation, and specifications contained in this manual are subject to change without prior notice. The manufacturer does not make any explicit or implied statement or guarantee about the contents of this document, especially for merchantability or fitness for any specific purpose. Any manufacturer's equipment described in this manual is sold or licensed as it is. If the equipment is damaged artificially after purchase, the buyer (not the manufacturer) shall bear all costs for necessary repair and any losses caused by equipment defects. If the correct operating voltage setting is not selected before operation, the manufacturer will not be responsible for any damage caused by system operation. Please make sure the voltage has been set correctly before use. - 1 - KFH162S User Manual Product Description The KFH162S HDMI digital KVM extender delivers FHD HDMI video, USB2.0, keyboard, mouse and stereo audio signals up to a remote desk over fiber optic cable or Cat5 cable. A complete set of KFH162S including Transmitter (KFH162S-TX) and Receiver (KFH162S-RX). The Transmitter is connected to a computer or server, and the receiver is connected to a display, keyboard, mouse, audio player and other USB devices. The KFH162S supports signal transmission over fiber optic cable or Cat5 cable, it supports single-mode and multi-mode optical fiber, the maximum transmission distance of single mode is 80km, for multimode the transmission distance is up to 300m. If you connect the KFH162S-TX and KFH162S-RX with a Cat5 cable, the transmitting distance is up to 150m. It supports the transmission of 1 channel high-quality HDMI signals and has a wide range of applications. *Note: The bandwidth of the optical module must reach 1.25Gbit/sec. Product Features FHD HDMI video transmission, resolution is up to 3840x2160@30Hz Point-to-point protocol for ultra-low latency Supports 1000M LAN port Supports optical fiber transmission When using CAT5E cable for direct connection, the transmitting distance can reach 150m Supports USB 2.0 transparent transmission Supports a wide range of USB peripherals, such as encrypted U disk, face recognition and other USB devices, connect via the built-in 4 USB hub Bidirectional Analog Audio: line in/out with microphone and headphone support Supports 1-channel asynchronous serial transmission Supports connect to a switch (1000M) Supports point-to-point dial-up connection Built-in ESD protection circuit, can effectively prevent static electricity - 2 - KFH162S KFH162S_RX front panel User Manual No. Components Description 1 FIBER Optical port, plug this port with an SFP+ module 2 RJ45 RJ45 port, plug this port with a CAT5E cable 3 ID CODE DIP switch for point-to-point DIP connection 4 SW1 Pushbutton 1 5 SW2 Pushbutton 2 6 USB2.0 Connect to USB peripherals 7 DC 12V 12V power connection port KFH162S_RX rear panel No. Components Description 1 Ground connection Connect the device to the ground 2 IR Reserved port 3 Audio Audio output 4 Microphone MIC input 5 USB2.0 Connect to USB peripherals 6 TGR Serial port 7 HDMI OUT Connect to a HDMI monitor 8 LINK Connection status indicator 9 PWR Power Indicator - 3 - KFH162S KFH162S_TX front panel User Manual No. Components Description 1 FIBER Optical port, plug this port with an SFP+ module 2 RJ45 RJ45 port, plug this port with a CAT5E cable 3 ID CODE DIP switch for point-to-point DIP connection 4 SW1 Pushbutton 5 DC 12V 12V power connection port KFH162S_TX rear panel No. Components Description 1 Ground connection Connect the device to the ground 2 IR Reserved port 3 AOUT MIC out 4 AIN Audio in 5 USB IN USB in 6 TGR Serial port 7 HDMI IN HDMI video input 8 LINK Connection status indicator 9 PWR Power Indicator - 4 - KFH162S Connection Diagram User Manual 1. Connect the KFH162S_TX to the HDMI video port, USB port and audio port of a computer. (See in the above diagram) 2. Connect the KFH162S_RX to keyboard, mouse, monitor and audio device. (See in the above diagram) 3. Connect the USB peripherals to the KFH162S_RX. (See in the above diagram) 4. Connect the transmitter and receiver interfaces via optical fiber or CAT5E cable. (See in the above diagram) Notice: the ID code on TX and RX must be in the same segment. 5. Power on the transmitter and receiver. (See in the above diagram) - 5 - KFH162S Specifications Function HDMI in HDMI out Power SFP Interfaces Microphone Speaker LAN USB Type B USB 2.0 Resolution Connection Cable Power Input Power Consumption Operating Temperature Storage Temperature Humidity Material Net Weight (kg) Product Dimension (W × D × H) Package Dimension (W × D × H) User Manual KFH162S_TX KFH162S_RX 1 NA NA 1 12V 12V SFP x 1 3.5mm Stereo Jack (Pink) 3.5mm Stereo Jack (Green) RJ45 SFPx 1 3.5mm Stereo Jack (Pink) 3.5mm Stereo Jack (Green) RJ45 1 N/A N/A USB x 4 3840x2160@30Hz Fiber optical cable or Cat5/6 cable DC12V /2A 3W 050 DC12V / 2A 2.5W (USB peripherals not included) -2060 080% RH, Non-condensing Metal 0.4 kg 0.4kg 158 mm x 80 mm x 30mm 525 mm x 226 mm x 106mm - 6 -