Leuchten Direkt 995397 VALERIE

Product Overview

The Leuchten Direkt VALERIE is a modern, multi-arm LED ceiling light designed for living spaces. It combines energy-efficient LED technology with a stylish design.

Technical Specifications

• Power Consumption: 3.7 W (per LED board)
• Luminous Flux: 445 lm (per LED board)
• Total Power: 21 W
• Total Luminous Flux: 1450 lm
• Lifespan: 25,000 hours
• Color Temperature: 3,000 K (Warm White)
• Voltage: 230V / 50Hz~
• LED Type: 5x LED-Board 30V DC / 3.7 W
• Switching Cycles: 15,000x
• Startup Time: < 0.5 seconds

Energy Efficiency Class: <E> (Note: The specific class is indicated by '<E>' in the original document, suggesting a placeholder or a class that needs to be filled in by the manufacturer based on specific regulations.)

Assembly Instructions

This section provides guidance on assembling the Leuchten Direkt VALERIE ceiling light. Please refer to the diagrams for visual assistance.

Diagram 1: General Assembly Overview

The first diagram on page 1 provides a general overview of the light fixture. It shows the main structure with five curved arms extending from a central point. Small components such as screws, connectors, and LED boards are also depicted, along with the overall dimensions and technical specifications.

Diagram 2: Detailed Assembly Steps

Detailed assembly diagrams are provided on page 2. These illustrate the process of attaching the light fixture's components.

Parts Identification: The diagrams reference numbered parts, including:

• Central mounting hub/plate
• Curved arms (likely 5 in total)
• Various screws (indicated by quantities like 2x, 2x, 1x)
• Connectors or holders for LED boards
• LED boards

Assembly Sequence:

1. Prepare the central mounting structure, which serves as the base for attaching the arms.
2. Attach the five curved arms to the central hub. The diagrams indicate specific attachment points and orientations, secured by screws. For example, the diagrams show the use of two screws of one type, two screws of another type, and one screw of a third type to fasten the arms.
3. Connect the LED boards to their respective holders or directly to the fixture's internal wiring.
4. Connect the wiring from the LED boards to the main power supply connections within the fixture.
5. Ensure all connections are secure before proceeding to installation.

Note: Specific wiring connections and mounting procedures to the ceiling are not detailed in the provided diagrams but are standard for ceiling light installations.

Contact Information

Leuchten Direkt GmbH

Olakenweg 36

D-59457 Werl

Phone: +49 (0) 2922 9721 9290

Email: Kundenservice@neuhaus-group.de

Website: www.leuchtendirekt.de