BaBylissPRO Professional Nano Light Ionic Dryer

Product Technology & Benefits

Nano Titanium Technology

Nano Titanium is an exceptional conductor of heat, stable in ultra-high temperatures. It uses micro-particles of titanium for optimal heat performance, resulting in beautiful, healthy hair. Nano Titanium yields maximum far-infrared heat, penetrating hair from within for gentle drying without damage. It emits negative ions in their most beneficial form for faster drying and locking in natural moisture, leaving hair smooth, silky, shiny, and frizz-free.

Ion Generator

The integrated Ion Generator accelerates drying, reduces frizz, retains moisture, and makes hair smoother.

Get to Know Your Hairdryer

Models: BNTC9200/BNTC9200MB, BNTC9200NY/BNTC9200P

• 9 ft. Power Cord
• Power Switch
• Nano Titanium Technology for Maximum Smoothness and Shine
• Digital Buttons with 3 Heat/3 Speed Settings
• Auto Dual Voltage
• Cold Shot Button to Lock in Styles
• Ion Generator
• Removable Mesh Filter and Filter Cover for Easy Cleaning
• 1 Concentrator with Cool-to-the-Touch Sides
• 1 Extra-Deep Contoured Diffuser
• 1 Straightening Pic with Curved Teeth

Important Safety Instructions

DANGER: Any appliance is electrically live even when the switch is off.

To reduce the risk of death or injury by electric shock:

1. Always unplug appliance immediately after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other liquid.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

1. This appliance should never be left unattended when plugged in.
2. This appliance should not be used by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to place of purchase for examination and repair.
5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and other debris.
7. Never use while sleeping.
8. Never drop or insert objects into any opening.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord to operate dryer.
11. Do not direct hot air toward eyes or other heat-sensitive areas.
12. Air outlet grille and attachments may be very hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while operating.
14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
15. To prolong the life of the dryer, keep filters clean of hair and dust.
16. Do not use with voltage converter.
17. Before plugging in, read the information about dual voltage contained in the “DUAL VOLTAGE” section of this manual.

[Save Instructions] ?

Operating Instructions

This appliance is intended for professional or household use. Use on Alternating Current (60/50 Hz) only. Standard dryers are designed to operate at 110–125 or 220–240 volts A.C.

Polarized Plug: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Dual Voltage

This dryer has dual voltage. It will automatically adjust to the proper voltage. Use an adapter plug (not included) with the correct configuration prior to use in outlet.

Drying Basics

1. Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel blot hair to remove excess moisture. Section hair. Using the dryer along with your styling brush, direct hot air through one section of hair at a time. Move dryer steadily across each section so that the hot air passes through hair. Direct airflow at hair, not scalp.
2. Keep dryer’s air intake vents unobstructed and free from hair while drying.
3. To avoid overdrying and possible damage to hair or skin, do not concentrate heat on one section for any length of time. Keep dryer moving as you style.
4. For quick touch-ups between shampoos, dampen hair with a mist of water before styling with the dryer.
5. When using your dryer to create curls and waves, dry hair almost completely on a warmer temperature setting, then finish styling with cooler air.
6. This dryer includes a concentrator attachment. Use the attachment when you need drying power in a small area (such as a curl or a wave), or when you want to relax curly hair.
7. This dryer includes a diffuser attachment. Use the attachment to lift and separate hair while diffused air dries it gently.
8. This dryer includes a straightening pic attachment. Use the attachment for volume and lift or smoothing.

Styling Guide

Body & Volume

To create extra volume, turn head upside down while drying. Position the airflow toward the roots for maximum lift. When hair is dry, gently toss head back and brush hair into place.

Straightening

Work with hair in sections when creating a super-straight look. Using a large round brush (approximately 2" in diameter), hold hair taut in each section and bend ends slightly under as you dry.

Making Waves

Tousled, natural-looking waves are easily created by grasping hair at the roots and scrunching between fingertips while drying.

User Maintenance

Your dryer is virtually maintenance-free. No lubrication is needed. The dryer must be kept clean for proper operating performance.

When cleaning is needed, unplug the cord, allow to cool and clean dust and lint from air intake openings with a small brush or the brush attachment of a vacuum cleaner. The outer surface of the dryer should be wiped clean with a damp cloth only.

Blocked or clogged air intake vents will cause the dryer to overheat. If overheating occurs, an automatic safety device will shut the dryer or the heat off to prevent damage or personal injury. If the unit or the heat turns off, unplug the cord and allow the dryer to cool for 10 to 15 minutes before restarting. Make sure the air vents are clean.

Cleaning the Filter

To ensure the longevity of your dryer, clean the filter regularly. We recommend cleaning the dryer’s filter after 40 hours of use, or when buildup is visible.

1. Remove the removable mesh filter and filter cover from the back of the dryer by lightly twisting the filter cover counterclockwise.
2. Rinse the removable mesh filter and filter cover under hot water and set aside to dry completely before re-installing (DO NOT INSTALL IF THERE IS ANY EVIDENCE OF WATER ON THE FILTER ❌?).
3. Using a soft brush or cloth, remove any excess dust or hair on the fixed filter of the dryer.
4. Once the removable mesh filter and filter cover are completely dry, re-attach them onto the back of the dryer by lightly twisting the filter cover clockwise.

Caution Regarding Cord

CAUTION: NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the dryer. Damage will occur at the high flex point of entry into the dryer, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or unit stops or operates intermittently.

If the cord or dryer is damaged or does not operate properly, return it for repair to place of purchase or an authorized service representative only. No repairs should be attempted by the consumer.

Storage

IMPORTANT: When not in use, your dryer should be disconnected, allowed to cool, and stored in a safe, dry location, out of reach of children. Do not wrap line cord around dryer. Allow the cord to hang or lie loose and straight at the point of entry into the dryer.

Important Safety Reminder: GFCI

This message about Ground Fault Circuit Interrupters (GFCIs) can save a life!

IF YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI* NOW! Your local electrician can help you decide which type is best for you – a portable unit or a permanent unit. The National Electrical Code now requires GFCIs in bathrooms, garages, and outdoor outlets of all new homes.

WHY DO YOU NEED A GFCI? Electricity and water don’t mix. If your hair dryer falls into water while plugged in, the electric shock can be fatal, even if the switch is off. A regular fuse or circuit breaker won’t protect you. A GFCI offers far greater protection.

A GFCI can save your life! Don’t wait... install one now!

*A GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the flow of electricity.

Federal Communications Commission (FCC) Notice

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Supplier's Declaration of Conformity

Brand: BaBylissPRO®

Model No.: BNTC9200/BNTC9200MB, BNTC9200NY/BNTC9200P

Description: Ionic Dryer

Responsible Party: Conair LLC

Address: 1 Cummings Point Road, Stamford, CT 06902

Contact: (203) 351-9000

Standards: FCC Part 15 Subpart B, ANSI C63.4-2014

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

DATE OF ISSUE: 06/19/2024

Limited Warranty

Subject to the exclusions and limitations contained herein, Babyliss Pro (“Babyliss Pro”) warrants that the BaBylissPRO® Ionic Dryer (“Product”) will be free from material defects in materials and workmanship under normal home use conditions for a period of TWO (2) years beginning on the date the Product was purchased in its original, sealed packaging, unless otherwise specified in this Limited Warranty. This Limited Warranty is only for U.S. consumers (defined herein as purchasers at retail for personal, family, or household use) who originally purchase the Product from Babyliss Pro or an authorized Babyliss Pro reseller.

This Limited Warranty does NOT cover:

• Normal wear and tear;
• Any Product purchased by commercial purchasers or for commercial or non-household uses;
• Accessories, parts, or software added to the Product after the system is shipped from Babyliss Pro;
• Any costs associated with the replacement or repair of the Product, including labor, installation, or other costs incurred by you without prior Babyliss Pro approval;
• Damage to the Product, defective conditions, or nonconformities due to: (1) external causes, including shipping, accidents, problems with electrical power (Product designed only for use with 120-volt outlets), abnormal conditions (such as mechanical or environmental); (2) usage not in accordance with Product instructions; (3) misuse, neglect, unauthorized alteration, unauthorized repair; and (4) acts of God or other events beyond Babyliss Pro’s control;
• Damage caused by you or any non-authorized third party may void this Limited Warranty;
• Damage caused by accessories or replacement parts not specifically authorized by Babyliss Pro may void this Limited Warranty; and
• Any Product where the original Product identification markings (trademark or serial number) have been removed, altered, or obliterated from the Product.

Hassle-Free Warranty

If the Product fails during the warranty period for reasons covered by this Limited Warranty, Babyliss Pro will, at its option, repair or replace the Product, or refund the purchase price (less amount attributable to prior usage). To obtain a return shipping label, email feedback@babylisspro.com, or call 1-800-326-6247 to speak with a representative.

Babyliss Pro will inspect the Product and attempt repair, replacement, or refund within thirty (30) days, though delays may occur.

IMPORTANT: If service is performed by someone other than an Authorized Service Center, remind them to call 1-800-326-6247 to ensure proper diagnosis, correct parts, and warranty status.

California Residents Only

The TWO (2) year Limited Warranty period begins on the date of delivery. California residents can also return the Product to the store of purchase or another retail store selling BaBylissPRO® products for repair, replacement, or refund. Alternatively, they may return nonconforming products directly to Babyliss Pro for repair or replacement by calling 1-800-326-6247. Babyliss Pro will cover costs for warranty service and shipping.

This Limited Warranty gives you specific legal rights, and you may also have other rights that vary by state or jurisdiction. In the event of a breach, you may have claims for replacement, damages, or other penalties.

Limitations of Liability/Additional Limitations and Exclusions

All express and implied warranties are limited in duration to the Limited Warranty Period. Babyliss Pro’s responsibility is limited to repair, replacement, or refund. These remedies are the sole and exclusive remedies for any breach of warranty. To the maximum extent permitted by law, Babyliss Pro is not responsible for any indirect, special, incidental, or consequential damages (including lost profits, downtime, loss of goodwill, damage to or replacement of equipment and property) even if advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.

This Limited Warranty is issued by: Babyliss Pro Division, Conair LLC, 1 Cummings Point Road, Stamford, CT 06902, 1-800-326-6247.